弹性体表面的刚度影响内皮细胞的机械性能
The stiffness of elastomeric surfaces influences the mechanical properties of endothelial cells
摘要:
细胞及其周围的机械性能的最佳表征是一个主要的兴趣问题。事实上,细胞功能和发育受到外部刺激的强烈影响。此外,在某些情况下,细胞力学的变化可能与疾病或功能障碍有关。在这项工作中,原子力显微镜(AFM)被应用于研究硅橡胶弹性体聚二甲基硅氧烷(PDMS)的机械性能,在细胞培养中的一个常见的基板。在该弹性体材料的不同试样上进行力谱分析,该弹性体材料在其结构中含有不同比率的树脂与交联剂(5:1、10:1、20:1、30:1和50:1),这影响最终材料性质(例如,刚度、弹性)。为了量化PDMS的机械性能,从形成力曲线的不同段计算因子,如杨氏模量、最大粘附力以及在尖端的恒定高度接触时的松弛幅度和时间(停留时间差为零)。它表明,材料的刚度增加了由之前的氧等离子体处理的样品,所需的亲水性切换,相反,观察到的其亲水性。随后在这些等离子体处理的PDMS系统上孵育内皮HUVEC细胞,与在玻璃参照物上获得的那些相比,产生细胞力学的微小变化,在玻璃参照物上细胞显示出高得多的扩散趋势,并且通过延伸,显著的膜硬化。因此,表面润湿性变成比基底刚度引起细胞力学变化更高相关性的因素。
英文摘要:
Optimal characterization of the mechanical properties of both cells and their surrounding is an issue of major interest. Indeed, cell function and development are strongly influenced by external stimuli. Furthermore, a change in cell mechanics might, in some cases, associate with diseases or malfunctioning. In this work, atomic force microscopy (AFM) was applied to examine the mechanical properties of the silicone elastomer polydimethylsiloxane (PDMS) a common substrate in cell culture. Force spectroscopy analysis was done over different specimens of this elastomeric material containing varying ratios of resin to cross-linker in its structure (5:1, 10:1, 20:1, 30:1 and 50:1), which impacts the final material properties (e.g., stiffness, elasticity). To quantify the mechanical properties of the PDMS, factors as the modulus of Young, the maximum adhesive forces as well as both relaxation amplitudes and times upon constant height contact of the tip (dwell time different of zero) were calculated from the different segments forming the force curves. It is demonstrated that the material stiffness is increased by prior oxygen plasma treatment of the sample, required for hydrophilic switching, contrarily to what observed for its adhesiveness. Subsequent incubation of endothelial HUVEC cells on top of these plasma treated PDMS systems yields minor variation in cell mechanics in comparison to those obtained on a glass reference, on which cells show much higher spreading tendency and, by extension, a remarkable membrane hardening. Thus, surface wettability turns a factor of higher relevance than substrate stiffness inducing variations in the cell mechanics.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。