NiO/CuO纳米复合材料和NiO纳米纤维作为非酶电化学胆固醇生物传感器的评价和比较
Evaluation and comparison of NiO/CuO nanocomposite and NiO nanofibers as non-enzymatic electrochemical cholesterol biosensor
摘要:
由于胆固醇的氧化还原活性低,制备高灵敏度的非酶电化学传感器用于胆固醇的检测是一个具有挑战性的问题。在本研究中,一种新型的金属氧化物组合的电化学响应进行了探索。采用静电纺丝法制备了NiO/CuO纳米复合材料,并利用扫描电镜、能谱仪和X射线衍射仪对其形貌和结构特征进行了研究。电化学研究表明,NiO/CuO/GC电极在中性缓冲溶液中的线性检测范围为0.8至6.5 mM,低检测限为5.9 μ M,灵敏度为10.27 μ A·mM-1·cm-2。制作的电极具有3秒的响应时间和良好的能力,以区分干扰物种。此外,纳米复合电极表现出高稳定性以及其他有利因素,使其成为一种有效的传感器检测胆固醇。此外,循环伏安实验表明,NiO/GCE的电流响应约为NiO/CuO/GCE响应的30%,表明纳米复合材料对胆固醇氧化具有比NiO纳米纤维更大的电催化活性。NiO/GCE结果显示灵敏度为2.5 microA·mM-1·cm-2,响应时间为2秒,并且在三周的时间跨度内具有有限的稳定性。
英文摘要:
Fabrication of a highly sensitive non-enzymatic electrochemical sensor for the detection of cholesterol is a challenging issue due to its low redox activity. In the present study, the electrochemical response of a novel combination of metal oxides has been explored. NiO/CuO nanocomposite was fabricated by electrospinning method and its morphology and structural characteristics were studied using scanning electron microscopy, EDX and X-ray diffraction techniques. Electrochemical studies revealed that the NiO/CuO/GC electrode poses a linear detection range between 0.8 to 6.5 mM, low detection limit of 5.9 microM and a sensitivity of 10.27 microA.mM-1 .cm-2 in the neutral buffer solution. The fabricated electrode has a response time of 3 seconds and a good ability to discriminate interfering species. Moreover, the nanocomposite electrode exhibited high stability as well as the other favorable factors, makes it an effective sensor for the detection of cholesterol. In addition, cyclic voltammetry experiments showed that the current response of NiO/GCE is approximately 30 % of the NiO/CuO/GCE response, suggesting that the nanocomposite has a greater electrocatalytic activity towards cholesterol oxidation than NiO nanofibers. NiO/GCE results showed the sensitivity of 2.5 microA.mM-1 .cm-2 , response time of 2 seconds and a limited stability over three-week time span.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。