使用无人机系统(UAS)评估和监测高层建筑项目中的坠落危险预防系统
Using Unmanned Aerial Systems (UAS) for Assessing and Monitoring Fall Hazard Prevention Systems in High-rise Building Projects
摘要:
本研究开发了一个无人机系统(UAS)的框架,以监测高层建筑项目中未受保护的边缘和开口附近的坠落危险预防系统。开发并测试了一个基于机器学习的三步框架,用于从UAS捕获的图像中检测护栏柱。首先,护栏检测器被训练来定位支撑护栏的柱的候选位置。由于在此过程中使用的图像是从实际工作现场收集的,因此识别出了几个错误检测。因此,在以下步骤中引入了额外的约束以过滤掉错误检测。其次,研究小组对图像应用了水平线检测器,以正确检测地板,并去除不靠近地板的检测。最后,由于护栏柱的安装与每个柱之间的近似正态分布,估计它们之间的空间,并用于找到两个柱之间的最可能的距离。研究小组使用了开发的方法的各种组合来监控高层建筑项目中捕获的图像中的护栏系统。通过对准确率和召回率指标的比较表明,级联分类器在地板检测和护栏间距估计方面取得了更好的性能。研究结果表明,所提出的护栏识别系统可以提高护栏的评估,并促进安全工程师的任务,确定高层建筑项目中的坠落危险。
英文摘要:
This study develops a framework for unmanned aerial systems (UASs) to monitor fall hazard prevention systems near unprotected edges and openings in high-rise building projects. A three-step machine-learning-based framework was developed and tested to detect guardrail posts from the images captured by UAS. First, a guardrail detector was trained to localize the candidate locations of posts supporting the guardrail. Since images were used in this process collected from an actual job site, several false detections were identified. Therefore, additional constraints were introduced in the following steps to filter out false detections. Second, the research team applied a horizontal line detector to the image to properly detect floors and remove the detections that were not close to the floors. Finally, since the guardrail posts are installed with approximately normal distribution between each post, the space between them was estimated and used to find the most likely distance between the two posts. The research team used various combinations of the developed approaches to monitor guardrail systems in the captured images from a high-rise building project. Comparing the precision and recall metrics indicated that the cascade classifier achieves better performance with floor detection and guardrail spacing estimation. The research outcomes illustrate that the proposed guardrail recognition system can improve the assessment of guardrails and facilitate the safety engineer's task of identifying fall hazards in high-rise building projects.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。