一种紧凑的在线学习脉冲神经形态生物信号处理器
A Compact Online-Learning Spiking Neuromorphic Biosignal Processor
摘要:
可穿戴设备上的实时生物信号处理因其在医疗保健应用中的潜力而引起了全世界的关注。然而,低面积、低功耗和对不同患者的高适应性的要求对传统的算法和硬件平台提出了挑战。在这个设计中,提出了一个紧凑的在线学习神经形态硬件架构,具有超低功耗设计明确的生物信号处理。采用基于迹的发放时间依赖可塑性(STDP)算法实现了单层兴奋抑制发放神经网络的硬件友好在线学习。采用事件驱动架构和优化迭代计算方法等技术,最大限度地降低了在线学习硬件实现的硬件利用率和功耗。实验结果表明,所提出的设计达到了87.36%和83%的美国国家标准与技术研究所混合数据库(MNIST)和心电图分类的准确率。硬件架构在Zynq-7020 FPGA上实现。实现结果表明,查找表(LUT)和触发器(FF)的利用率分别降低了14.87和7.34倍,功耗降低了21.69%,与最先进的。
英文摘要:
Real-time biosignal processing on wearable devices has attracted worldwide attention for its potential in healthcare applications. However, the requirement of low-area, low-power and high adaptability to different patients challenge conventional algorithms and hardware platforms. In this design, a compact online learning neuromorphic hardware architecture with ultra-low power consumption designed explicitly for biosignal processing is proposed. A trace-based Spiking-Timing-Dependent-Plasticity (STDP) lgorithm is applied to realize hardware-friendly online learning of a single-layer excitatory-inhibitory spiking neural network. Several techniques, including event-driven architecture and a fully optimized iterative computation approach, are adopted to minimize the hardware utilization and power consumption for the hardware implementation of online learning. Experiment results show that the proposed design reaches the accuracy of 87.36% and 83% for the Mixed National Institute of Standards and Technology database (MNIST) and ECG classification. The hardware architecture is implemented on a Zynq-7020 FPGA. Implementation results show that the Look-Up Table (LUT) and Flip Flops (FF) utilization reduced by 14.87 and 7.34 times, respectively, and the power consumption reduced by 21.69% compared to state of the art.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。