更好地理解OPD在VLTI上更高灵敏度和对比度的局限性
Towards a Better Understanding of OPD Limitations for Higher Sensitivity and Contrast at the VLTI
摘要:
在甚大望远镜干涉仪(VLTI)中精确控制光程差(OPD)对于我们银河系中心黑洞的表征至关重要-导致2020年诺贝尔物理学奖。现在有显着的努力,以推动这些OPD的限制,甚至进一步,特别是实现100 nm的OPD RMS的8米单位望远镜(UT的),以允许更高的对比度和灵敏度在VLTI。这项工作计算了VLTI的理论大气OPD极限为5 nm和15 nm RMS,当在良好的大气条件下使用明亮的目标时,UT和1.8m辅助望远镜(AT)的电流水平分别为200 nm和100 nm RMS。我们发现实验证据的$f^{-17/3}$幂律理论上预测的效果望远镜过滤的情况下,目前没有观察到的UT的AT。拟合一系列的振动镜模型作为阻尼谐振子,我们能够模拟的UT OPD PSD的重力条纹跟踪器的$<1nm/\sqrt{Hz}$ RMSE高达100 Hz,这可以充分解释一个隐藏的$f^{-17/3}$幂律UT。在60- 90 Hz和40- 50 Hz范围内的振动频率被发现通常主导重力的闭环OPD残差。将加速度计与重力数据进行交叉关联,发现40- 50 Hz范围内的强贡献来自M1-M3反射镜,而来自60- 100 Hz贡献的大部分功率可能来自M4-M10之间。根据振动镜模型,表明对于特定基线(具有OPD $\sim$ 200 nm RMS)实现低于100 nm的OPD RMS需要去除几乎所有低于100 Hz的振动源。
英文摘要:
Precise control of the optical path differences (OPD) in the Very Large Telescope Interferometer (VLTI) was critical for the characterization of the black hole at the center of our Galaxy - leading to the 2020 Nobel prize in physics. There is now significant effort to push these OPD limits even further, in-particular achieving 100nm OPD RMS on the 8m unit telescopes (UT's) to allow higher contrast and sensitivity at the VLTI. This work calculated the theoretical atmospheric OPD limit of the VLTI as 5nm and 15nm RMS, with current levels around 200nm and 100nm RMS for the UT and 1.8m auxillary telescopes (AT's) respectively, when using bright targets in good atmospheric conditions. We find experimental evidence for the $f^{-17/3}$ power law theoretically predicted from the effect of telescope filtering in the case of the ATs which is not currently observed for the UT's. Fitting a series of vibrating mirrors modelled as dampened harmonic oscillators, we were able to model the UT OPD PSD of the gravity fringe tracker to $<1nm/\sqrt{Hz}$ RMSE up to 100Hz, which could adequately explain a hidden $f^{-17/3}$ power law on the UTs. Vibration frequencies in the range of 60-90Hz and also 40-50Hz were found to generally dominate the closed loop OPD residuals of Gravity. Cross correlating accelerometer with Gravity data, it was found that strong contributions in the 40-50Hz range are coming from the M1-M3 mirrors, while a significant portion of power from the 60-100Hz contributions are likely coming from between the M4-M10. From the vibrating mirror model it was shown that achieving sub 100nm OPD RMS for particular baselines (that have OPD$\sim$200nm RMS) required removing nearly all vibration sources below 100Hz.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。