arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2209.06791eess.SYcs.SY
收藏

基于滤波B样条的Delta 3D打印机位置变化动力学振动补偿

Vibration Compensation of Delta 3D Printer with Position-varying Dynamics using Filtered B-Splines

Nosakhare Edoimioya, Cheng-Hao Chou, Chinedum E. Okwudire

摘要:

Delta机器人正在成为熔丝制造3D打印机机械设计的热门选择,因为它可以达到比传统串行轴设计更高的速度。与串行3D打印机一样,delta打印机在高速下会受到不必要的振动,这会降低制造零件的质量。这种不希望的振动已被抑制在串行打印机使用线性模型反演前馈控制方法,如过滤B样条(FBS)的方法。然而,像FBS方法这样的技术在Delta 3D打印机上实现具有计算挑战性,因为它们具有耦合的位置依赖性动态特性。在本文中,我们提出了一种解决计算瓶颈的方法,通过(1)离线参数化动态的位置相关部分,以实现有效的在线模型生成,(2)在给定轨迹上的采样点(而不是每个点)计算实时模型,以及(3)采用QR分解来减少与矩阵求逆相关的浮点算术运算的数量。在模拟中,我们报告了一个计算时间减少高达23倍,使用所提出的方法,同时保持高精度,相比使用计算昂贵的精确LPV模型的控制器。在实验中,我们证明了使用我们提出的控制器在delta 3D打印机上的各个位置打印的零件的质量显著提高,与基线替代方案相比,基线替代方案使用来自一个位置的LTI模型。通过在打印过程中的加速度测量,我们还表明,所提出的控制器的打印质量提升是由于振动减少超过20%的基线控制器相比。

英文摘要:

The delta robot is becoming a popular choice for the mechanical design of fused filament fabrication 3D printers because it can reach higher speeds than traditional serial-axis designs. Like serial 3D printers, delta printers suffer from undesirable vibration at high speeds which degrades the quality of fabricated parts. This undesirable vibration has been suppressed in serial printers using linear model-inversion feedforward control methods like the filtered B-splines (FBS) approach. However, techniques like the FBS approach are computationally challenging to implement on delta 3D printers because of their coupled, position-dependent dynamics. In this paper, we propose a methodology to address the computational bottlenecks by (1) parameterizing the position-dependent portions of the dynamics offline to enable efficient online model generation, (2) computing real-time models at sampled points (instead of every point) along the given trajectory, and (3) employing QR factorization to reduce the number of floating-point arithmetic operations associated with matrix inversion. In simulations, we report a computation time reduction of up to 23x using the proposed method, while maintaining high accuracy, when compared to a controller using the computationally expensive exact LPV model. In experiments, we demonstrate significant quality improvements on parts printed at various positions on the delta 3D printer using our proposed controller compared to a baseline alternative, which uses an LTI model from one position. Through acceleration measurements during printing, we also show that the print quality boost of the proposed controller is due to vibration reductions of more than 20\% when compared to the baseline controller.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑