arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2209.04257cs.CE
收藏

SMC非牛顿可压缩基体的非等温直接束模拟

Non-isothermal direct bundle simulation of SMC compression molding with a non-Newtonian compressible matrix

Nils Meyer, Sergej Ilinzeer, Andrew N. Hrymak, Frank Henning, Luise Kärger

摘要:

片状模塑料(SMC)的压缩成型是一种制造工艺,其中在热模具中形成一堆不连续的纤维增强热固性片材。纤维在此成型过程中的重新取向可以通过基于Jeffery方程的宏观模型或通过单个纤维束的直接中尺度模拟来描述。在复杂的几何形状和长纤维,直接束模拟优于国家的最先进的宏观方法的纤维取向和纤维体积分数方面的准确性。然而,还有待证明,他们能够预测必要的压缩力,考虑非等温,非牛顿和压实行为。在这方面的贡献,这两种方法都适用于拉伸流动在压力流变仪和23%的玻璃纤维体积分数的实验相比。结果表明,这两个模型预测的总压缩力和方向的贡献相当不错的短流路。对于长的流动路径和厚的堆栈,出现复杂的变形机制和模拟模型和实验观测之间的偏差的潜在来源进行了讨论。此外,Jeffery的基本模式能够预测类似于高保真中尺度模式的方向。对于平面SMC流动,这个基本模型似乎更适合于比更先进的取向模型与扩散项开发的注射成型。

英文摘要:

Compression molding of Sheet Molding Compounds (SMC) is a manufacturing process in which a stack of discontinuous fiber-reinforced thermoset sheets is formed in a hot mold. The reorientation of fibers during this molding process can be either described by macroscale models based on Jeffery's equation or by direct mesoscale simulations of individual fiber bundles. In complex geometries and for long fibers, direct bundle simulations outperform the accuracy of state-of-the-art macroscale approaches in terms of fiber orientation and fiber volume fraction. However, it remains to be shown that they are able to predict the necessary compression forces considering non-isothermal, non-Newtonian and compaction behavior. In this contribution, both approaches are applied to the elongational flow in a press rheometer and compared to experiments with 23% glass fiber volume fraction. The results show that both models predict contributions to the total compression force and orientation reasonably well for short flow paths. For long flow paths and thick stacks, complex deformation mechanisms arise and potential origins for deviation between simulations models and experimental observations are discussed. Furthermore, Jeffery's basic model is able to predict orientations similar to the high-fidelity mesoscale model. For planar SMC flow, this basic model appears to be even better suited than the more advanced orientation models with diffusion terms developed for injection molding.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑