新型无膜激波管中的甲烷与正己烷点火研究
Methane and n-hexane ignition in a newly developed diaphragmless shock tube
AI总结:
本研究通过在传统膜式激波管上加装快速作用阀构建无膜激波管,在 10-20 bar 和 738-1537 K 条件下测量甲烷和正己烷的点火延迟时间,验证了该升级方法的性能与可靠性。
摘要:
激波管被常规用于生成可靠的气相化学动力学数据。传统的膜破裂模式激波管运行存在诸多挑战,最终可能影响化学动力学数据质量。人们开发了多种无膜概念以克服使用膜的缺点。这些无膜设计大多需要对激波管驱动段进行大幅改造,且在某些情况下无法匹配膜模式的运行性能。本研究在现有膜式激波管上加装快速作用阀,并评估无膜激波管在研究甲烷和正己烷点火中的性能。该无膜激波管具有诸多优势:消除膜的使用、避免实验中大量人工操作、实现激波管设施自动化、良好控制驱动条件,以及获得良好的重复性以支持可靠的气相化学动力学研究。在无膜激波管中对三种甲烷混合物和两种正己烷混合物进行了点火延迟时间测量,条件为 $P_5$ = 10 - 20 bar 和 $T_5$ = 738 - 1537 K。针对富燃料、贫燃料和富氧(未稀释)混合物获得的结果与先前报道的实验数据和文献动力学模型(甲烷用 AramcoMech 3.0 [1],正己烷用 Zhang et al. mechanism [2])非常吻合。本研究提供了一种简便的方法,可将传统激波管升级为无膜运行模式,并为可靠的化学动力学研究开辟了新可能。
英文摘要:
Shock tubes have been routinely used to generate reliable chemical kinetic data for gas-phase chemistry. The conventional diaphragm-rupture mode for shock tube operation presents many challenges that may ultimately affect the quality of chemical kinetics data. Numerous diaphragmless concepts have been developed to overcome the drawbacks of using diaphragms. Most of these diaphragmless designs require significant alterations in the driver section of the shock tube and, in some cases, fail to match the performance of the diaphragm-mode of operation. In the present work, an existing diaphragm-type shock tube is retrofitted with a fast-acting valve, and the performance of the diaphragmless shock tube is evaluated for investigating the ignition of methane and n-hexane. The diaphragmless shock tube reported here presents many advantages, such as eliminating the use of diaphragms, avoiding substantial manual effort during experiments, automating the shock tube facility, having good control over driver conditions, and obtaining good repeatability for reliable gas-phase chemical kinetic studies. Ignition delay time measurements have been performed in the diaphragmless shock tube for three methane mixtures and two n-hexane mixtures at $P_5$ = 10 - 20 bar and $T_5$ = 738 - 1537 K. The results obtained for fuel-rich, fuel-lean, and oxygen-rich (undiluted) mixtures show very good agreement with previously reported experimental data and literature kinetic models (AramcoMech 3.0 [1] for methane and Zhang et al. mechanism [2] for n-hexane). The study presents an easy and simple method to upgrade conventional shock tubes to a diaphragmless mode of operation and opens new possibilities for reliable chemical kinetics investigations.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。