arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2208.00769cond-mat.softphysics.optics
收藏

软材料中的积分光弹性:相位延迟、方位角与应力光学系数

Integrated photoelasticity in a soft material: phase retardation, azimuthal angle and stress-optic coefficient

Yuto Yokoyama, Benjamin R. Mitchell, Ali Nassiri, Brad L. Kinsey, Yannis P. Korkolis, Yoshiyuki Tagawa

AI总结:

该研究通过球体压注明胶凝胶实验,结合偏振相机测量与Hertzian接触理论,验证积分光弹性可重建软材料三维应力场。

摘要:

本文研究了承受三维应力状态的软材料中的积分光弹性。实验中,将一个实心球体压向明胶凝胶(杨氏模量约为4.2 kPa),根据加载力的不同,其变形量可达4.5 mm。使用偏振相机测量凝胶中由此产生的光弹性参数(相位延迟、方位角和应力光学系数)。将测得的延迟和方位角与基于Hertzian接触理论的解析预测进行比较。值得注意的是,光弹性参数的实验结果与解析结果不仅在延迟方面,而且在方位角方面均表现出合理的一致性;方位角与主应力方向相关,且在以往研究中很少得到验证,但对于重建软材料中的三维应力场至关重要。所用明胶凝胶的应力光学系数为3.12×10^-8 1/Pa。这些发现证明,积分光弹性可用于测量软材料中的三维应力场,这在生物医学工程和细胞打印应用中具有重要意义。

英文摘要:

Integrated photoelasticity is investigated for a soft material subjected to a three-dimensional stress state. In the experiment, a solid sphere is pressed against a gelatin gel (Young's modulus is about 4.2 kPa) that deforms up to 4.5 mm depending on the loading forces. The resulting photoelastic parameters (phase retardation, azimuthal angle, and stress-optic coefficient) in the gel are measured using a polarization camera. The measured retardation and azimuth are compared with the analytical prediction based on Hertzian contact theory. Remarkably, experimental and analytical results of the photoelastic parameters show a reasonable agreement not only in the retardation but also in the azimuth that is related to the direction of principal stresses and but rarely validated in previous studies, is essential for reconstructing three-dimensional stress fields in soft materials. The stress-optic coefficient of the gelatin gel used is 3.12$\times10^{-8}$ 1/Pa. Such findings proved that integrated photoelasticity is useful for measuring the three-dimensional stress field in soft materials, which is of importance in biomedical engineering and cell printing applications.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑