This paper describes a resilient navigation and planning system used in the Indy Autonomous Challenge (IAC) competition. The IAC is a competition where full-scale race cars run autonomously on Indianapolis Motor Speedway(IMS) up to 290 km/h (180 mph). Race cars will experience severe vibrations. Especially at high speeds. These vibrations can degrade standard localization algorithms based on precision GPS-aided inertial measurement units. Degraded localization can lead to serious problems, including collisions. Therefore, we propose a resilient navigation system that enables a race car to stay within the track in the event of localization failures. Our navigation system uses a multi-sensor fusion-based Kalman filter. We detect degradation of the navigation solution using probabilistic approaches to computing optimal measurement values for the correction step of our Kalman filter. In addition, an optimal path planning algorithm for obstacle avoidance is proposed. In this challenge, the track has static obstacles on the track. The vehicle is required to avoid them with minimal time loss. By taking the original optimal racing line, obstacles, and vehicle dynamics into account, we propose a road-graph-based path planning algorithm to ensure that our race car can perform efficient obstacle avoidance. The proposed localization system was successfully validated to show its capability to prevent localization failures in the event of faulty GPS measurements during the historic world's first autonomous racing at IMS. Owing to our robust navigation and planning algorithm, we were able to finish the race as one of the top four teams while the remaining five teams failed to finish due to collisions or out-of-track violations.
In this paper we derive the dynamic equations of a race-car model via Lie-group methods. Lie-group methods are nowadays quite familiar to computational dynamicists and roboticists, but their diffusion within the vehicle dynamics community is still limited. We try to bridge this gap by showing that this framework merges gracefully with the Articulated Body Algorithm (ABA) and enables a fresh and systematic formulation of the vehicle dynamics. A significant contribution is represented by a rigorous reconciliation of the ABA steps with the salient features of vehicle dynamics, such as road-tire i…
AMZ Driverless, ETH Zürich（苏黎世联邦理工学院AMZ无人驾驶车队）；Computer Vision Lab, ETH Zürich（苏黎世联邦理工学院计算机视觉实验室）
We present a holistically designed three layer control architecture capable of outperforming a professional driver racing the same car. Our approach focuses on the co-design of the motion planning and control layers, extracting the full potential of the connected system. First, a high-level planner computes an optimal trajectory around the track, then in real-time a mid-level nonlinear model predictive controller follows this path using the high-level information as guidance. Finally a high frequency, low-level controller tracks the states predicted by the mid-level controller. Tracking the pr…
RaceMOP: Mapless Online Path Planning for Multi-Agent Autonomous Racing using Residual Policy Learning
TUM School of Engineering and Design, Technical University of Munich（慕尼黑工业大学工程与设计学院）；Graduate School of Information Science and Technology, The University of Tokyo（东京大学信息科学与技术研究生院）
We present a reinforcement learning-based solution to autonomously race on a miniature race car platform. We show that a policy that is trained purely in simulation using a relatively simple vehicle model, including model randomization, can be successfully transferred to the real robotic setup. We achieve this by using novel policy output regularization approach and a lifted action space which enables smooth actions but still aggressive race car driving. We show that this regularized policy does outperform the Soft Actor Critic (SAC) baseline method, both in simulation and on the real car, but…
Model-Structured Neural Networks to Control the Steering Dynamics of Autonomous Race Cars
Professorship of Autonomous Vehicle Systems, Technical University of Munich（自动驾驶车辆系统教授职位，慕尼黑技术大学）；Department of Information Technology and Electrical Engineering (DIETI), University of Naples Federico II（信息科技与电气工程系（DIETI），那不勒斯费德里科二世大学）；Chair of Automatic Control, Department of Mechanical Engineering, TUM School of Engineering and Design（自动控制教授职位，机械工程系，慕尼黑技术大学工程与设计学院）；Department of Industrial Engineering, University of Trento（工业工程系，特伦托大学）
The rising popularity of driver-less cars has led to the research and development in the field of autonomous racing, and overtaking in autonomous racing is a challenging task. Vehicles have to detect and operate at the limits of dynamic handling and decisions in the car have to be made at high speeds and high acceleration. One of the most crucial parts in autonomous racing is path planning and decision making for an overtaking maneuver with a dynamic opponent vehicle. In this paper we present the evaluation of a track based offline policy learning approach for autonomous racing. We define spec…
While the majority of autonomous driving research has concentrated on everyday driving scenarios, further safety and performance improvements of autonomous vehicles require a focus on extreme driving conditions. In this context, autonomous racing is a new area of research that has been attracting considerable interest recently. Due to the fact that a vehicle is driven by its perception, planning, and control limits during racing, numerous research and development issues arise. This paper provides a comprehensive overview of the autonomous racing system built by team KAIST for the Indy Autonomo…
Georgia Institute of Technology（佐治亚理工学院）；Twentieth Century Fox（二十世纪福克斯）；Starfleet Academy（星际舰队学院）；Tyrell Inc.（泰瑞尔公司）
A fundamental aspect of racing is overtaking other race cars. Whereas previous research on autonomous racing has majorly focused on lap-time optimization, here, we propose a method to plan overtaking maneuvers in autonomous racing. A Gaussian process is used to learn the behavior of the leading vehicle. Based on the outputs of the Gaussian process, a stochastic Model Predictive Control algorithm plans optimistic trajectories, such that the controlled autonomous race car is able to overtake the leading vehicle. The proposed method is tested in a simple simulation scenario.
Technische Universität Darmstadt（达姆施塔特工业大学）；Dr. Ing. h.c. F. Porsche AG（保时捷股份公司）；ETH Zürich（苏黎世联邦理工学院）
Engineering a high-performance race car requires a direct consideration of the human driver using real-world tests or Human-Driver-in-the-Loop simulations. Apart from that, offline simulations with human-like race driver models could make this vehicle development process more effective and efficient but are hard to obtain due to various challenges. With this work, we intend to provide a better understanding of race driver behavior and introduce an adaptive human race driver model based on imitation learning. Using existing findings and an interview with a professional race engineer, we identif…
With the evolution of self-driving cars, autonomous racing series like Roborace and the Indy Autonomous Challenge are rapidly attracting growing attention. Researchers participating in these competitions hope to subsequently transfer their developed functionality to passenger vehicles, in order to improve self-driving technology for reasons of safety, and due to environmental and social benefits. The race track has the advantage of being a safe environment where challenging situations for the algorithms are permanently created. To achieve minimum lap times on the race track, it is important to…
Amazon Web Services（亚马逊云科技）；University of Pennsylvania（宾夕法尼亚大学）
Autonomous race cars require perception, estimation, planning, and control modules which work together asynchronously while driving at the limit of a vehicle's handling capability. A fundamental challenge encountered in designing these software components lies in predicting the vehicle's future state (e.g. position, orientation, and speed) with high accuracy. The root cause is the difficulty in identifying vehicle model parameters that capture the effects of lateral tire slip. We present a model-based planning and control framework for autonomous racing that significantly reduces the effort re…
Autonomous driving and electric vehicles are nowadays very active research and development areas. In this paper we present the conversion of a standard Kyburz eRod into an autonomous vehicle that can be operated in challenging environments such as Swiss mountain passes. The overall hardware and software architectures are described in detail with a special emphasis on the sensor requirements for autonomous vehicles operating in partially structured environments. Furthermore, the design process itself and the finalized system architecture are presented. The work shows state of the art results in…
This paper introduces the autonomous system of the "Smart Shark II" which won the Formula Student Autonomous China (FSAC) Competition in 2018. In this competition, an autonomous racecar is required to complete autonomously two laps of unknown track. In this paper, the author presents the self-driving software structure of this racecar which ensure high vehicle speed and safety. The key components ensure a stable driving of the racecar, LiDAR-based and Vision-based cone detection provide a redundant perception; the EKF-based localization offers high accuracy and high frequency state estimation;…
Technical University of Munich（慕尼黑工业大学）；University of Pennsylvania（宾夕法尼亚大学）
Motorsport has always been an enabler for technological advancement, and the same applies to the autonomous driving industry. The team TUM Auton-omous Motorsports will participate in the Indy Autonomous Challenge in Octo-ber 2021 to benchmark its self-driving software-stack by racing one out of ten autonomous Dallara AV-21 racecars at the Indianapolis Motor Speedway. The first part of this paper explains the reasons for entering an autonomous vehicle race from an academic perspective: It allows focusing on several edge cases en-countered by autonomous vehicles, such as challenging evasion mane…
Complex autonomous driving, such as drifting, requires high-precision and high-frequency pose information to ensure accuracy and safety, which is notably difficult when using only onboard sensors. In this paper, we propose a drift controller with two feedback control loops: sideslip controller that stabilizes the sideslip angle by tuning the front wheel steering angle, and circle controller that maintains a stable trajectory radius and circle center by controlling the wheel rotational speed. We use an extended Kalman filter to estimate the state. A robustified KASA algorithm is further propose…
RACF: A Resilient Autonomous Car Framework with Object Distance Correction
Department of Electrical and Computer Engineering, University of Arizona, Tucson, AZ, USA（电气与计算机工程系，亚利桑那大学，图森，亚利桑那州，美国）；Department of Aerospace and Mechanical Engineering, University of Arizona, Tucson, AZ, USA（航空航天与机械工程系，亚利桑那大学，图森，亚利桑那州，美国）
As autonomous cars are rolled out into new environments, their ability to solve the simultaneous localization and mapping (SLAM) problem becomes critical. In order to tackle this problem, autonomous vehicles rely on sensor suites that provide them with information about their operating environment. When large scale production is taken into consideration, a trade-off between an acceptable sensor suite cost and its resulting performance characteristics arises. Furthermore, guaranteeing the system's performance requires a resilient sensor network design. This work seeks to address such trade-offs…
We present research using the latest reinforcement learning algorithm for end-to-end driving without any mediated perception (object recognition, scene understanding). The newly proposed reward and learning strategies lead together to faster convergence and more robust driving using only RGB image from a forward facing camera. An Asynchronous Actor Critic (A3C) framework is used to learn the car control in a physically and graphically realistic rally game, with the agents evolving simultaneously on tracks with a variety of road structures (turns, hills), graphics (seasons, location) and physic…
Carnegie Mellon University（卡内基梅隆大学）；Cleveland State University（克利夫兰州立大学）
Autonomous racing is a challenging problem, as the vehicle needs to operate at the friction or handling limits in order to achieve minimum lap times. Autonomous race cars require highly accurate perception, state estimation, planning and precise application of controls. What makes it even more challenging is the accurate identification of vehicle model parameters that dictate the effects of the lateral tire slip, which may change over time, for example, due to wear and tear of the tires. Current works either propose model identification offline or need good parameters to start with (within 15-…
Carnegie Mellon University（卡内基梅隆大学）；Bosch Research Pittsburgh（博世匹兹堡研究院）；NVIDIA（英伟达）；AICrowd；Amazon（亚马逊）；Arrival Ltd.（Arrival公司）；Pinterest
We present the results of our autonomous racing virtual challenge, based on the newly-released Learn-to-Race (L2R) simulation framework, which seeks to encourage interdisciplinary research in autonomous driving and to help advance the state of the art on a realistic benchmark. Analogous to racing being used to test cutting-edge vehicles, we envision autonomous racing to serve as a particularly challenging proving ground for autonomous agents as: (i) they need to make sub-second, safety-critical decisions in a complex, fast-changing environment; and (ii) both perception and control must be robu…
We present a novel approach to modern car control utilizing a combination of Deep Convolutional Neural Networks and Long Short-Term Memory Systems: Both of which are a subsection of Hierarchical Representations Learning, more commonly known as Deep Learning. Using Deep Convolutional Neural Networks and Long Short-Term Memory Systems (DCNN/LSTM), we propose an end-to-end approach to accurately predict steering angles and throttle values. We use this algorithm on our latest robot, El Toro Grande 1 (ETG) which is equipped with a variety of sensors in order to localize itself in its environment. U…
Iterative learning control has been successfully used for several decades to improve the performance of control systems that perform a single repeated task. Using information from prior control executions, learning controllers gradually determine open-loop control inputs whose reference tracking performance can exceed that of traditional feedback-feedforward control algorithms. This paper considers iterative learning control for a previously unexplored field: autonomous racing. Racecars are driven multiple laps around the same sequence of turns while operating near the physical limits of tire-…
The University of Sydney（悉尼大学）；University of Sao Paulo（圣保罗大学）
In the automation of many kinds of processes, the observable outcome can often be described as the combined effect of an entire sequence of actions, or controls, applied throughout its execution. In these cases, strategies to optimise control policies for individual stages of the process might not be applicable, and instead the whole policy might have to be optimised at once. On the other hand, the cost to evaluate the policy's performance might also be high, being desirable that a solution can be found with as few interactions as possible with the real system. We consider the problem of optim…
Sony Europe B.V., Schlieren/Switzerland Branch（索尼欧洲有限公司，施利伦/瑞士分公司）；University of Zurich（苏黎世大学）
Autonomous car racing is a major challenge in robotics. It raises fundamental problems for classical approaches such as planning minimum-time trajectories under uncertain dynamics and controlling the car at the limits of its handling. Besides, the requirement of minimizing the lap time, which is a sparse objective, and the difficulty of collecting training data from human experts have also hindered researchers from directly applying learning-based approaches to solve the problem. In the present work, we propose a learning-based system for autonomous car racing by leveraging a high-fidelity phy…
