基于振动晶格干涉仪的传感器在空间导航中的应用
Application of Shaken Lattice Interferometry Based Sensors to Space Navigation
AI总结:
本研究将基于振动晶格干涉仪(SLI)的加速度计用于深空导航,通过模拟OSIRIS-REx任务贝努小行星附近的导航过程,证实该传感器可提升导航性能、减少跟踪需求并降低表面力建模的保真度要求。
摘要:
基于高灵敏度振动晶格干涉仪(SLI)的传感器有望为深空任务提供精确测量非引力扰动力的能力。本研究模拟了OSIRIS-REx任务在贝努小行星附近的导航过程,并加入了星载基于SLI的加速度计的测量数据。模拟在喷气推进实验室(JPL)的任务分析、运行与导航工具包(MONTE)中开展,并整合了来自导航与辅助信息设施(NAIF)数据库的OSIRIS-REx重建轨迹与姿态数据。采用NAIF的重建数据可提供符合实际的真实动力学误差,而JPL的MONTE软件能够为滤波器生成高保真的标称参考基准。研究展示了星载基于SLI的传感器在OSIRIS-REx任务两个轨道阶段的导航性能,以及其带来的跟踪需求与复杂建模工作的减少情况。总体而言,结果表明,与仅采用无线电跟踪的配置相比,加入基于SLI的加速度计测量数据可提升导航性能。此外,结果证实,高精度加速度计测量数据可在三天周期内有效替代至少一天的深空网(DSN)观测时段,从而降低跟踪需求。研究还表明,使用星载基于SLI的加速度计时,仅需较低保真度的表面力建模与参数估计。
英文摘要:
High-sensitivity shaken lattice interferometry (SLI) based sensors have the potential to provide deep space missions with the ability to precisely measure non-gravitational perturbing forces. This work considers the simulation of the OSIRIS-REx mission navigation in the vicinity of Bennu with the addition of measurements from onboard SLI-based accelerometers. The simulation is performed in the Jet Propulsion Laboratory's (JPL) Mission Analysis, Operations and Navigation Toolkit (MONTE) and incorporates OSIRIS-REx reconstructed trajectory and attitude data from the Navigation and Ancillary Information Facility (NAIF) database. The use of the reconstructed data from NAIF provides realistic true dynamical errors and JPL's MONTE software allows for a high-fidelity simulation of a nominal reference for the filter. The navigation performance and reduction of tracking and complex modeling enabled by the onboard SLI-based sensor are presented for two orbital phases of the OSIRIS-REx mission. Overall, the results show that the addition of SLI-based accelerometer measurements improves navigation performance, when compared to a radiometric tracking only configuration. In addition, results demonstrate that highly-precise accelerometer measurements can effectively replace at least one day of DSN passes over a three-day period, thereby reducing tracking requirements. Furthermore, it is shown that lower-fidelity surface force modeling and parameter estimation is required when using onboard SLI-based accelerometers.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。