arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2207.05686cond-mat.mtrl-scicond-mat.otherphysics.app-ph
收藏

一种机械强度高、延展性好的极低矫顽力软磁

A mechanically strong and ductile soft magnet with extremely low coercivity

Liuliu Han, Fernando Maccari, Isnaldi R. Souza Filho, Nicolas J. Peter, Ye Wei, Baptiste Gault, Oliver Gutfleisch, Zhiming Li, Dierk Raabe

摘要:

软磁材料(SMM)用于电气应用和可持续能源供应,允许磁通量响应于施加的磁场的变化而变化,能量损失低1。运输、家庭和制造业的电气化由于滞后损失导致能源消耗增加2。因此,最大限度地降低介电常数,从而缩小这些损耗,至关重要3。然而,仅仅满足这一目标是不够的:电动发动机中的SMM必须承受严重的机械负载,即,合金需要高强度和延展性4。这是一个基本的设计挑战,因为大多数增强强度的方法都会引入可能钉扎磁畴的应力场,从而增加矫顽力和磁滞损耗5。在这里,我们介绍一种方法来克服这种困境。我们设计了一种Fe-Co-Ni-Ta-Al多元合金,其具有铁磁性基体和顺磁性共格纳米颗粒(~91 nm尺寸,~55%体积分数)。它们阻碍位错运动,提高强度和延展性。它们的小尺寸、低相干性和小静磁能在磁畴壁宽度之下产生相互作用体积,导致最小的畴壁钉扎,从而保持软磁性能。该合金在54%延伸率下的抗拉强度为1336 MPa,极低的矫顽力为78 A/m(<1 Oe),中等饱和磁化强度为100 Am 2/kg,高电阻率为103 μΩ u Ohm cm。

英文摘要:

Soft magnetic materials (SMMs) serve in electrical applications and sustainable energy supply, allowing magnetic flux variation in response to changes in applied magnetic field, at low energy loss1. The electrification of transport, households and manufacturing leads to an increase in energy consumption due to hysteresis losses2. Therefore, minimizing coercivity, which scales these losses, is crucial3. Yet, meeting this target alone is not enough: SMMs in electrical engines must withstand severe mechanical loads, i.e., the alloys need high strength and ductility4. This is a fundamental design challenge, as most methods that enhance strength introduce stress fields that can pin magnetic domains, thus increasing coercivity and hysteretic losses5. Here, we introduce an approach to overcome this dilemma. We have designed a Fe-Co-Ni-Ta-Al multicomponent alloy with ferromagnetic matrix and paramagnetic coherent nanoparticles (~91 nm size, ~55% volume fraction). They impede dislocation motion, enhancing strength and ductility. Their small size, low coherency and small magnetostatic energy create an interaction volume below the magnetic domain wall width, leading to minimal domain wall pinning, thus maintaining the soft magnetic properties. The alloy has a tensile strength of 1336 MPa at 54% tensile elongation, extremely low coercivity of 78 A/m (<1 Oe), moderate saturation magnetization of 100 Am2/kg, and high electrical resistivity of 103 μΩ u Ohm cm.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑