This letter is the second part of a three-part tutorial focusing on rate-splitting multiple access (RSMA) for 6G. As Part II of the tutorial, this letter addresses the interplay between RSMA and integrated radar sensing and communications (ISAC). In particular, we introduce a general RSMAassisted ISAC architecture, where the ISAC platform has a dual capability to simultaneously communicate with downlink users and probe detection signals to a moving target. Then, the metrics of radar sensing and communications are respectively introduced, followed by a RSMA-assisted ISAC waveform design example which jointly minimizes the Cramer-Rao bound (CRB) of target estimation and maximizes the minimum fairness rate (MFR) amongst communication users subject to the per-antenna power constraint. The superiority of RSMA-assisted ISAC is verifed through simulation results in both terrestrial and satellite scenarios. RSMA is demonstrated to be a powerful multiple access and interference management strategy for ISAC, and provides a better communication-sensing trade-off compared with the conventional benchmark strategies. Consequently, RSMA is a promising technology for next generation multiple access (NGMA) and future networks such as 6G and beyond.
Rate-splitting multiple access (RSMA) has recently appeared as a powerful technique for improving the downlink performance of multiple-input multiple-output (MIMO) systems. By flexibly managing interference, RSMA can deliver high spectral and energy efficiency, as well as robustness to imperfect channel state information (CSI). In another development, an intelligent reflecting surface (IRS) has emerged as a method to control the wireless environment through software-configurable, near-passive, sub-wavelength reflecting elements. This article presents the potential of synergy between IRS and RS…
This letter is the third part of a three-part tutorial that focuses on rate-splitting multiple access (RSMA) for 6G. As Part III of the tutorial, this letter provides an overview of integrating RSMA and reconfigurable intelligent surface (RIS). We first introduce two potential PHY layer techniques, namely, RSMA and RIS, including the need for integrating RSMA with RIS and how they could help each other. Next, we provide a general model of an RIS-aided RSMA system and summarize some key performance metrics. Then, we discuss the major advantages of RIS-aided RSMA networks, and illustrate the rat…
This paper investigates the problem of resource allocation for joint communication and radar sensing system on rate-splitting multiple access (RSMA) based unmanned aerial vehicle (UAV) system. UAV simultaneously communicates with multiple users and probes signals to targets of interest to exploit cooperative sensing ability and achieve substantial gains in size, cost and power consumption. By virtue of using linearly precoded rate splitting at the transmitter and successive interference cancellation at the receivers, RSMA is introduced as a promising paradigm to manage interference as well as …
In order to manage the increasing interference between radar and communication systems, joint radar and communication (RadCom) systems have attracted increased attention in recent years, with the studies so far considering the assumption of perfect Channel State Information at the Transmitter (CSIT). However, such an assumption is unrealistic and neglects the inevitable CSIT errors that need to be considered to fully exploit the multi-antenna processing and interference management capabilities of a joint RadCom system. In this work, a joint RadCom system is designed which marries the capabilit…
Dual-Functional Radar-Communication systems enhance the benefits of communications and radar sensing by jointly implementing these on the same hardware platform and using the common RF resources. An important and latest concern to be addressed in designing such Dual-Functional Radar-Communication systems is maximizing the energy-efficiency. In this paper, we consider a Dual-Functional Radar-Communication system performing simultaneous multi-user communications and radar sensing, and investigate the energy-efficiency behaviour with respect to active transmission elements. Specifically, we formu…
This letter is the first part of a three-part tutorial focusing on rate-splitting multiple access (RSMA) for 6G. As Part I of the tutorial, the letter presents the basics of RSMA and its applications in light of 6G. To begin with, we first delineate the design principle and basic transmission frameworks of downlink and uplink RSMA. We then illustrate the applications of RSMA for addressing the challenges of various potential enabling technologies and use cases, consequently making it a promising next generation multiple access (NGMA) scheme for future networks such as 6G and beyond. We briefly…
Cooperative rate splitting (CRS), built upon rate splitting multiple access (RSMA) and opportunistic user relaying, has been recognized as a promising transmission strategy to enhance the user fairness and spectral efficiency in multiantenna broadcast channels. To further boost its performance, the interplay of CRS and reconfigurable intelligent surface (RIS) is investigated in this work. Specifically, a novel RIS-aided CRS transmission framework is proposed and the corresponding resource allocation problem to maximize the minimum rate among users is investigated. An alternative optimization a…
In this paper, we consider a multi-antenna dual-functional radar-communication (DFRC) satellite system, where the satellite has a dual capability to simultaneously communicate with downlink satellite users (SUs) and probe detection signals to a moving target. To design an appropriate DFRC waveform, we investigate the rate-splitting multiple access (RSMA)-assisted DFRC beamfoming, and employ the Cramer-Rao bound (CRB) as a radar performance metric, which represents a lower bound on the variance of unbiased estimators. The beamforming is optimized to minimize the CRB subject to quality of servic…
