arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2204.07384cond-mat.mtrl-sci
收藏

基于全势 KKR Green's Function Method 的 Y(Co,Fe,Ni,Cu)$_5$ 磁晶各向异性的第一性原理计算

First-principles Calculation of Magnetocrystalline Anisotropy of Y(Co,Fe,Ni,Cu)$_5$ Based on Full-potential KKR Green's Function Method

Haruki Okumura, Tetsuya Fukushima, Hisazumi Akai, Masako Ogura

AI总结:

本研究基于全势KKR Green's函数方法结合相干势近似,计算了Y(Co,Fe,Ni,Cu)5体系的磁晶各向异性常数,发现YFe3Co2具有显著增强的各向异性,且适量镍掺杂在稳定结构的同时可保持与YCo5相当的各向异性场。

摘要:

通过用铁、铜和镍等其他元素替代钴,可以改善 YCo$_5$ 永磁体的性能。为了确定其最佳成分,有必要在一致的框架内进行系统的理论计算。在本研究中,我们基于全势 Korringa-Kohn-Rostoker Green's function method 并结合 coherent potential approximation,计算了 Y(Co$_{1-x-y}$Fe$_{x}$Cu$_{y}$)$_3$(Co$_{1-z}$Ni$_{z}$)$_2$ 的磁晶各向异性常数 $K_{\rm u}$。由于缺少由轨道极化引起的增强,计算得到的 YCo$_5$ 的 $K_{\rm u}$ 小于实验值。尽管 Y(Co$_{1-x-y}$Fe$_{x}$Cu$_{y}$)$_3$(Co$_{1-z}$Ni$_{z}$)$_2$ 的 $K_{\rm u}$ 值与实验值相比被系统性地低估了,但可以在一致的框架内分析掺杂效应。结果表明,YFe$_3$Co$_2$ 具有比原始 YCo$_5$($K_{\rm u}=1.82$ MJ/m$^3$)高得多的 $K_{\rm u}=5.00$ MJ/m$^3$,并且镍作为稳定元素会降低 YFe$_3$(Co$_{1-z}$Ni$_z$)$_2$ 的 $K_{\rm u}$ 和磁化强度。然而,$z\sim0.5$ 时的各向异性场可以与 YCo$_5$ 的值相竞争。

英文摘要:

The performance of permanent magnets YCo$_5$ can be improved by replacing cobalt with other elements, such as iron, copper, and nickel. In order to determine its optimum composition, it is necessary to perform systematic theoretical calculations in a consistent framework. In this study, we calculated the magnetocrystalline anisotropy constant $K_{\rm u}$ of Y(Co$_{1-x-y}$Fe$_{x}$Cu$_{y}$)$_3$(Co$_{1-z}$Ni$_{z}$)$_2$ on the basis of the full-potential Korringa-Kohn-Rostoker Green's function method in conjunction with the coherent potential approximation. The calculated $K_{\rm u}$ of YCo$_5$ was smaller than the experimental value because of a missing enhancement due to orbital polarization. Although the value of $K_{\rm u}$ of Y(Co$_{1-x-y}$Fe$_{x}$Cu$_{y}$)$_3$(Co$_{1-z}$Ni$_{z}$)$_2$ was systematically underestimated compared to their experimental counterparts, the doping effect can be analyzed within a consistent framework. The results have shown that YFe$_3$Co$_2$ has much higher $K_{\rm u}=5.00$ MJ/m$^3$ than pristine YCo$_5$ ($K_{\rm u}=1.82$ MJ/m$^3$), and that nickel as a stabilization element decreases $K_{\rm u}$ and magnetization in YFe$_3$(Co$_{1-z}$Ni$_z$)$_2$. However, the anisotropy field of $z\sim0.5$ can compete with the value of YCo$_5$.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑