4G LTE光网络设计
Optical Network Design for 4G LTE
摘要:
随着移动用户数量的迅速增加,3GPP发起了新技术4G长期演进(LTE)。LTE是一种使能技术,可以解决像Sleman这样的高需求地区的网络容量和质量问题。LTE网络的质量由骨干网和分布网来支撑。本文介绍了Sleman作为LTE主干网的光纤网络的设计。主干网需要沿85公里的G-652光缆,采用环形拓扑和WDM-STM 64技术。配电网采用GPON技术,G984型光缆总长61.35公里。通过计算,在optisystem仿真中,终端接收到的最小功率分别为-25 dBm和-26 dBm。该值是可接受的,因为它高于接收功率(接收器灵敏度)的最小值-28 dBm,这是指G.984.2的标准参数。上升时间的平均值为69 ps,该值仍低于上升时间的最大允许值70 ps。骨干链路的平均误码率为5 × 10 -4。
英文摘要:
The number of mobile users is increasing rapidly, 3GPP initiated a new technology 4G Long Term Evolution (LTE). LTE is an enabling technology as a solution to the problem of network capacity and quality in areas that have a high demand like Sleman. The quality of LTE networks are supported by backbone and distribution network. This paper describes the designing of fiber optic network as the LTE backbone network in Sleman. The backbone network requires G-652 optical cable along 85 km with a ring topology and WDM-STM64 technology. The distribution network uses GPON technology and the type of G984 optical cable along 61.35 km. The minimum of power received at the end-point in the optisystem simulation is -25 dBm and -26 dBm through the calculation. This value is acceptable, since it is above the minimum of power received (Receiver Sensitivity) -28 dBm which refers to the standard parameters of G.984.2. The average value of rise time is 69 ps, this value is still below the maximum allowable value of rise time 70 ps. Average BER of backbone link is 5x10-4.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。