宏观表面非均匀性对前进接触线的影响
Effect of Macroscopic Surface Heterogeneities on an Advancing Contact Line
摘要:
实验研究了非均匀表面上液-气界面的形状,以及接触线钉扎到表面缺陷所产生的力。不同的表面被认为是圆形缺陷作为阵列的可可脂补丁或小圆孔。将这些异质表面浸没在乙醇水溶液中,同时测量由前进接触线的变形产生的附加力,并表征界面形状及其对缺陷的钉扎。最初,浸没力与浸没深度呈线性关系,表明恒定的缺陷引起的刚度。当接触线脱离缺陷时,该状态结束。提出了一个简单的尺度来描述脱钉力和脱钉能。我们发现,随着缺陷间距的增加,界面刚度也增加,与缺陷半径的弱依赖性。缺陷之间的这种相互作用不能通过简单的缩放来捕获,但是可以通过考虑存在周期性孔阵列的界面变形的理论来很好地预测。通过包括固体缺陷(可可脂)来创建4相接触线,从而减小了钉扎力。缺陷半径对脱钉深度有非线性影响。4相接触线导致在缺陷完全浸没之前脱钉。这些实验结果和相关的理论有助于定量地理解表面不均匀性在多大程度上可以减缓润湿。这反过来又为定制异质表面的设计铺平了道路,以实现所需的润湿性能。
英文摘要:
The shape of a liquid-air interface advancing on a heterogeneous surface was studied experimentally, together with the force induced by the pinning of the contact line to surface defects. Different surfaces were considered with circular defects introduced as arrays of cocoa butter patches or small circular holes. These heterogeneous surfaces were submerged into aqueous ethanol solutions, while measuring the additional force arising from the deformation of the advancing contact line and characterising the interface shape and its pinning on the defects. Initially, the submersion force is linear with submerged depth, suggesting a constant defect-induced stiffness. This regime ends when the contact line de pins from the defects. A simple scaling is proposed to describe the depinning force and the depinning energy. We find that, as the defect separation increases, the interface stiffness increases too, with a weak dependency on the defect radius. This interaction between defects cannot be captured by the simple scaling, but can be well predicted by a theory considering the interface deformation in presence of periodic arrays of holes. Creating a 4-phase contact line, by including solid defects (cocoa butter) reduced pinning forces. The radius of the defect had a nonlinear effect on the depinning depth. The 4-phase contact line resulted in depinning before the defects are fully submerged. These experimental results and the associated theory help understanding quantitatively the extent to which surface heterogeneities can slow down wetting. This in turn paves the way to tailor the design of heterogeneous surfaces, towards desired wetting performances.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。