arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2203.06523cond-mat.mes-hallphysics.app-ph
收藏

时间分数双相位滞后框架研究具有TMTC沟道(TiS3,In4Se3)的晶体管和尺寸相关特性

A time-fractional dual-phase-lag framework to investigate transistors with TMTC channels (TiS3, In4Se3) and size-dependent properties

Mohammad Hosein Fotovvat, Zahra Shomali

摘要:

在这项研究中,一个时间分数双相滞后模型与温度跳跃边界条件作为选择的傅立叶定律替代晶体管的热建模,利用。更详细地说,数值模拟的热传递在新提出的TMTC场效应晶体管使用分数DPL方程进行了研究。此外,Caputo分数阶导数制定的有限差分格式离散的分数DPL模型。为了获得更精确的峰值温升结果,温度和热通量分布,尺寸相关的热性能被考虑在内。此外,温度跳跃边界条件也已被应用的混合型边界条件的手段。它得到,考虑尺寸依赖的热特性的晶体管研究中,结果在增加的峰值温升高达250%。此外,考虑到硅MOSFET的恒定体热性质,在α = 0.7、0.9和1的峰值温度上升的时间变化中观察到某些振荡。这就出现了电子纳米半导体器件中出现的所谓负偏置温度不稳定性。最后,研究了具有准一维能带结构沟道的二维材料晶体管的热点温度。结果表明,在所研究的FET中,三硫化钛的最大温升为19.63 K,其峰值温升最小。这表明,就热问题而言,TiS3可能是可接受的硅沟道替代品。

英文摘要:

In this study, a time fractional dual-phase-lag model with temperature jump boundary condition as a choice for the Fourier's law replacement in thermal modeling of transistors, is utilized. In more details, the numerical simulation of heat transfer in newly proposed TMTC field effect transistors using fractional DPL equation has been investigated. Moreover, the Caputo fractional derivative is employed to formulate the finite difference scheme for discretization of the fractional DPL model. In order to obtain more precise results for the peak temperature rise, the temperature and heat flux profiles, the size-dependent thermal properties are taken into account. Also, the temperature jump boundary condition has been also applied by means of a mixed-type boundary condition. It is obtained that considering size-dependent thermal characteristics for transistors under study, results in increase of the peak temperature rise up to 250 percent. Furthermore, considering constant bulk thermal properties for the silicon MOSFET, certain oscillations are observed in the time-variation of the peak temperature rise for alpha= 0.7, 0.9 and 1. This presents the so-called negative bias temperature instability appearing in electronic nano-semiconductor devices. Finally, the hotspot temperature has been researched in transistors containing two-dimensional materials with quasi one-dimensional band structure channels. It is obtained that among the studied FETs, titanium trisulfide with maximum temperature increase of 19.63 K exhibits the least peak temperature rise. This presents that TiS3 may be an acceptable silicon channel replacement as far as the thermal issues are concerned.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑