填充图案和构建方向对FDM打印部件机械性能的影响:实验模态分析方法
Effect of infill pattern and build orientation on mechanical properties of FDM printed parts: An experimental modal analysis approach
摘要:
熔融沉积成型(FDM)是使用热塑性材料制造产品的最广泛探索的增材制造方法之一。使用FDM制造的部件的机械性能受到制造过程中涉及的不同工艺参数的影响,因为它们影响不同横截面层之间的粘合。在这项研究中,填充模式和构建方向对使用FDM方法制造的PLA基零件的力学性能的影响进行了研究。六种不同的填充模式(三角形,立方体,同心,四面体,线,和锯齿形)和三个不同的方向(flatwise,edgewise,和直立)被认为是矩形梁类型的零件。为了确定具有不同填充图案和方向的部件的机械性能,进行挠曲弯曲试验。对制造的零件进行了实验模态分析,以观察固有频率与由弯曲试验获得的零件的弹性模量的关系。探索了实验模态分析作为FDM 3D打印部件机械性能测试的替代非破坏性方法的可能性。
英文摘要:
Fused Deposition Modeling (FDM) is one of the most widely explored additive manufacturing method that uses thermoplastic materials to manufacture products. Mechanical properties of parts manufactured using FDM are influenced by different process parameters involved during manufacturing as they impact the bonding among different layers of cross-section. In this study, the effect of infill patterns and build orientations on the mechanical properties of PLA based parts manufactured using FDM method is studied. Six different infill patterns (triangles, cubic, concentric, tetrahedral, lines, and zigzag) and three different orientations (flatwise, edgewise, and upright) are considered for rectangular beam type parts. For determining mechanical properties of parts with different infill patterns and orientations, flexural bending test is performed. Experimental modal analysis of manufactured parts is performed to observe the relation of natural frequencies with elastic modulus of the parts obtained from flexural bending test. The possibility of experimental modal analysis as an alternative non-destructive method for testing mechanical properties of FDM 3D printed parts is explored.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。