arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2202.04699physics.opticsphysics.app-ph
收藏

使用二维热边界层的相变材料的低能量切换

Low energy switching of phase change materials using a 2D thermal boundary layer

Jing Ning, Yunzheng Wang, Ting Yu Teo, Chung-Che Huang, Ioannis Zeimpekis, Katrina Morgan, Siew Lang Teo, Daniel W. Hewak, Michel Bosman, Robert E. Simpson

摘要:

相变材料的可切换的光学和电学特性在可重构光子器件中发现了数据存储之外的新应用。然而,需要高功率的热脉冲来将材料从结晶熔融淬火为非晶。这在硅光子学中尤其如此,其中波导材料的高热导率使得加热PCM能量效率低下。在这里,我们通过在二氧化硅或硅与PCM之间插入一层二维(2D)材料(MoS2或WS2)来提高激光诱导相变的能量效率。2D材料在非晶化(amorphization,简称AMF)过程中将所需的激光功率降低至少40%,具体取决于衬底。热模拟证实,MoS2和WS2 2D层都充当热障,其有效地将能量限制在PCM层内。值得注意的是,2D层的隔热效果相当于约100 nm的SiO2层。由范德华(vdW)结合层引起的高边界热阻限制了通过层界面的热扩散。因此,具有稳定vdW界面的2D材料可以用于提高PCM调谐的Si光子器件的热效率。此外,我们的波导模拟表明,2D层不影响Si波导中的传播模式,因此这种简单的附加薄膜在不降低波导的光学性能的情况下产生显著的能量效率改善。我们的研究结果为基于PCM的可重构光子器件的高能效激光诱导结构相变铺平了道路。

英文摘要:

The switchable optical and electrical properties of phase change materials (PCMs) are finding new applications beyond data storage in reconfigurable photonic devices. However, high power heat pulses are needed to melt-quench the material from crystalline to amorphous. This is especially true in silicon photonics, where the high thermal conductivity of the waveguide material makes heating the PCM energy inefficient. Here, we improve the energy efficiency of the laser-induced phase transitions by inserting a layer of two-dimensional (2D) material, either MoS2 or WS2, between the silica or silicon and the PCM. The 2D material reduces the required laser power by at least 40% during the amorphization (RESET) process, depending on the substrate. Thermal simulations confirm that both MoS2 and WS2 2D layers act as a thermal barrier, which efficiently confines energy within the PCM layer. Remarkably, the thermal insulation effect of the 2D layer is equivalent to a ~100 nm layer of SiO2. The high thermal boundary resistance induced by the van der Waals (vdW)-bonded layers limits the thermal diffusion through the layer interfaces. Hence, 2D materials with stable vdW interfaces can be used to improve the thermal efficiency of PCM-tuned Si photonic devices. Furthermore, our waveguide simulations show that the 2D layer does not affect the propagating mode in the Si waveguide, thus this simple additional thin film produces a substantial energy efficiency improvement without degrading the optical performance of the waveguide. Our findings pave the way for energy-efficient laser-induced structural phase transitions in PCM-based reconfigurable photonic devices.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑