We present a novel differential matching algorithm for 3D point cloud registration. Instead of only optimizing the feature extractor for a matching algorithm, we propose a learning-based matching module optimized to the jointly-trained feature extractor. We focused on edge-wise feature-forwarding architectures, which are memory-consuming but can avoid the over-smoothing effect that GNNs suffer. We improve its memory efficiency to scale it for point cloud registration while investigating the best way of connecting it to the feature extractor. Experimental results show our matching module's significant impact on performance improvement in rigid/non-rigid and whole/partial point cloud registration datasets with multiple contemporary feature extractors. For example, our module boosted the current SOTA method, RoITr, by +5.4%, and +7.2% in the NFMR metric and +6.1% and +8.5% in the IR metric on the 4DMatch and 4DLoMatch datasets, respectively.
New York University Abu Dhabi（纽约大学阿布扎比校区）；New York University（纽约大学）
Deep learning-based point cloud registration models are often generalized from extensive training over a large volume of data to learn the ability to predict the desired geometric transformation to register 3D point clouds. In this paper, we propose a meta-learning based 3D registration model, named 3D Meta-Registration, that is capable of rapidly adapting and well generalizing to new 3D registration tasks for unseen 3D point clouds. Our 3D Meta-Registration gains a competitive advantage by training over a variety of 3D registration tasks, which leads to an optimized model for the best perform…
We can use a method called registration to integrate some point clouds that represent the shape of the real world. In this paper, we propose highly accurate and stable registration method. Our method detects keypoints from point clouds and generates triplets using multiple descriptors. Furthermore, our method evaluates the consistency of rigid transformation parameters of each triplet with histograms and obtains the rigid transformation between the point clouds. In the experiment of this paper, our method had minimul errors and no major failures. As a result, we obtained sufficiently accurate …
The University of Sydney（悉尼大学）；University of Technology Sydney（悉尼科技大学）
We present a fast feature-metric point cloud registration framework, which enforces the optimisation of registration by minimising a feature-metric projection error without correspondences. The advantage of the feature-metric projection error is robust to noise, outliers and density difference in contrast to the geometric projection error. Besides, minimising the feature-metric projection error does not need to search the correspondences so that the optimisation speed is fast. The principle behind the proposed method is that the feature difference is smallest if point clouds are aligned very w…
Tongji University（同济大学）；Technische Universität München（慕尼黑工业大学）；ETH Zurich（苏黎世联邦理工学院）；Westwell lab（西井实验室）
Point cloud registration is a fundamental problem in 3D computer vision. Outdoor LiDAR point clouds are typically large-scale and complexly distributed, which makes the registration challenging. In this paper, we propose an efficient hierarchical network named HRegNet for large-scale outdoor LiDAR point cloud registration. Instead of using all points in the point clouds, HRegNet performs registration on hierarchically extracted keypoints and descriptors. The overall framework combines the reliable features in deeper layer and the precise position information in shallower layers to achieve robu…
The main goal of point cloud registration in Multi-View Partial (MVP) Challenge 2021 is to estimate a rigid transformation to align a point cloud pair. The pairs in this competition have the characteristics of low overlap, non-uniform density, unrestricted rotations and ambiguity, which pose a huge challenge to the registration task. In this report, we introduce our solution to the registration task, which fuses two deep learning models: ROPNet and PREDATOR, with customized ensemble strategies. Finally, we achieved the second place in the registration track with 2.96546, 0.02632 and 0.07808 un…
Point cloud registration is a popular topic which has been widely used in 3D model reconstruction, location, and retrieval. In this paper, we propose a new registration method, KSS-ICP, to address the rigid registration task in Kendall shape space (KSS) with Iterative Closest Point (ICP). The KSS is a quotient space that removes influences of translations, scales, and rotations for shape feature-based analysis. Such influences can be concluded as the similarity transformations that do not change the shape feature. The point cloud representation in KSS is invariant to similarity transformations…
We propose a method for speeding up a 3D point cloud registration through a cascading feature extraction. The current approach with the highest accuracy is realized by iteratively executing feature extraction and registration using deep features. However, iterative feature extraction takes time. Our proposed method significantly reduces the computational cost using cascading shallow layers. Our idea is to omit redundant computations that do not always contribute to the final accuracy. The proposed approach is approximately three times faster than the existing methods without a loss of accuracy…
Multi-view point cloud registration is a hot topic in the communities of multimedia technology and artificial intelligence (AI). In this paper, we propose a framework to reconstruct the 3D models by the multi-view point cloud registration algorithm with adaptive convergence threshold, and subsequently apply it to 3D model retrieval. The iterative closest point (ICP) algorithm is implemented combining with the motion average algorithm for the registration of multi-view point clouds. After the registration process, we design applications for 3D model retrieval. The geometric saliency map is comp…
University of Technology Sydney（悉尼科技大学）；Fondazione Bruno Kessler（布鲁诺·凯塞勒基金会）；University of Trento（特伦托大学）
Probabilistic 3D point cloud registration methods have shown competitive performance in overcoming noise, outliers, and density variations. However, registering point cloud pairs in the case of partial overlap is still a challenge. This paper proposes a novel overlap-guided probabilistic registration approach that computes the optimal transformation from matched Gaussian Mixture Model (GMM) parameters. We reformulate the registration problem as the problem of aligning two Gaussian mixtures such that a statistical discrepancy measure between the two corresponding mixtures is minimized. We intro…
The Discriminative Optimization (DO) algorithm has been proved much successful in 3D point cloud registration. In the original DO, the feature (descriptor) of two point cloud was defined as a histogram, and the element of histogram indicates the weights of scene points in "front" or "back" side of a model point. In this paper, we extended the histogram which indicate the sides from "front-back" to "front-back", "up-down", and "clockwise-anticlockwise". In addition, we reweighted the extended histogram according to the model points' distribution. We evaluated the proposed Improved DO on the Sta…
The University of Sydney（悉尼大学）；University of Technology Sydney（悉尼科技大学）
Registration is a transformation estimation problem between two point clouds, which has a unique and critical role in numerous computer vision applications. The developments of optimization-based methods and deep learning methods have improved registration robustness and efficiency. Recently, the combinations of optimization-based and deep learning methods have further improved performance. However, the connections between optimization-based and deep learning methods are still unclear. Moreover, with the recent development of 3D sensors and 3D reconstruction techniques, a new research directio…
GS-Matching: Reconsidering Feature Matching task in Point Cloud Registration
Shenzhen Institute of Advanced Technology, Chinese Academy of Sciences（中国科学院深圳先进技术研究院）；Guangdong Provincial Key Laboratory of Construction Robotics and Intelligent Construction（广东省建造机器人与智能建筑重点实验室）
Point cloud registration is a common step in many 3D computer vision tasks such as object pose estimation, where a 3D model is aligned to an observation. Classical registration methods generalize well to novel domains but fail when given a noisy observation or a bad initialization. Learning-based methods, in contrast, are more robust but lack in generalization capacity. We propose to consider iterative point cloud registration as a reinforcement learning task and, to this end, present a novel registration agent (ReAgent). We employ imitation learning to initialize its discrete registration pol…
Technical University of Munich（慕尼黑工业大学）；The Hong Kong Polytechnic University（香港理工大学）；Tongji University（同济大学）
Registration is a fundamental but critical task in point cloud processing, which usually depends on finding element correspondence from two point clouds. However, the finding of reliable correspondence relies on establishing a robust and discriminative description of elements and the correct matching of corresponding elements. In this letter, we develop a coarse-to-fine registration strategy, which utilizes rotation-invariant features and a new weighted graph matching method for iteratively finding correspondence. In the graph matching method, the similarity of nodes and edges in Euclidean and…
College of Science, Beijing Forestry University（北京林业大学理学院）；Academy of Opto-Electronics（光电研究院）；Aerospace Information Research Institute, Chinese Academy of Sciences（中国科学院空天信息创新研究院）
Point-cloud data acquired using a terrestrial laser scanner (TLS) play an important role in digital forestry research. Multiple scans are generally used to overcome occlusion effects and obtain complete tree structural information. However, it is time-consuming and difficult to place artificial reflectors in a forest with complex terrain for marker-based registration, a process that reduces registration automation and efficiency. In this study, we propose an automatic coarse-to-fine method for the registration of point-cloud data from multiple scans of a single tree. In coarse registration, po…
MINES ParisTech（巴黎高等矿业学院）；PSL University（巴黎文理研究大学）；Centre for Robotics（机器人中心）
We propose a method for generalizing deep learning for 3D point cloud registration on new, totally different datasets. It is based on two components, MS-SVConv and UDGE. Using Multi-Scale Sparse Voxel Convolution, MS-SVConv is a fast deep neural network that outputs the descriptors from point clouds for 3D registration between two scenes. UDGE is an algorithm for transferring deep networks on unknown datasets in a unsupervised way. The interest of the proposed method appears while using the two components, MS-SVConv and UDGE, together as a whole, which leads to state-of-the-art results on real…
Recently, several deep learning approaches have been proposed for point cloud registration. These methods train a network to generate a representation that helps finding matching points in two 3D point clouds. Finding good matches allows them to calculate the transformation between the point clouds accurately. Two challenges of these techniques are dealing with occlusions and generalizing to objects of classes unseen during training. This work proposes DeepBBS, a novel method for learning a representation that takes into account the best buddy distance between points during training. Best Budd…
Multi-instance point cloud registration is the problem of estimating multiple poses of source point cloud instances within a target point cloud. Solving this problem is challenging since inlier correspondences of one instance constitute outliers of all the other instances. Existing methods often rely on time-consuming hypothesis sampling or features leveraging spatial consistency, resulting in limited performance. In this paper, we propose PointCLM, a contrastive learning-based framework for mutli-instance point cloud registration. We first utilize contrastive learning to learn well-distribute…
Nanjing University of Aeronautics and Astronautics（南京航空航天大学）
Low-overlap regions between paired point clouds make the captured features very low-confidence, leading cutting edge models to point cloud registration with poor quality. Beyond the traditional wisdom, we raise an intriguing question: Is it possible to exploit an intermediate yet misaligned image between two low-overlap point clouds to enhance the performance of cutting-edge registration models? To answer it, we propose a misaligned image supported registration network for low-overlap point cloud pairs, dubbed ImLoveNet. ImLoveNet first learns triple deep features across different modalities a…
Shenzhen University（深圳大学）；University College London（伦敦大学学院）；Adobe Research（奥多比研究院）；Tel Aviv University（特拉维夫大学）
Rigid registration of partial observations is a fundamental problem in various applied fields. In computer graphics, special attention has been given to the registration between two partial point clouds generated by scanning devices. State-of-the-art registration techniques still struggle when the overlap region between the two point clouds is small, and completely fail if there is no overlap between the scan pairs. In this paper, we present a learning-based technique that alleviates this problem, and allows registration between point clouds, presented in arbitrary poses, and having little or …
University of Southern California（南加州大学）；Tencent Media Lab（腾讯媒体实验室）；Tencent America（腾讯美国）
An unsupervised point cloud registration method, called salient points analysis (SPA), is proposed in this work. The proposed SPA method can register two point clouds effectively using only a small subset of salient points. It first applies the PointHop++ method to point clouds, finds corresponding salient points in two point clouds based on the local surface characteristics of points and performs registration by matching the corresponding salient points. The SPA method offers several advantages over the recent deep learning based solutions for registration. Deep learning methods such as Point…
University of Technology Sydney（悉尼科技大学）；Nokia Technologies（诺基亚科技）；Tsinghua University（清华大学）
We propose a systematic approach for registering cross-source point clouds. The compelling need for cross-source point cloud registration is motivated by the rapid development of a variety of 3D sensing techniques, but many existing registration methods face critical challenges as a result of the large variations in cross-source point clouds. This paper therefore illustrates a novel registration method which successfully aligns two cross-source point clouds in the presence of significant missing data, large variations in point density, scale difference and so on. The robustness of the method i…
Academy for Multidisciplinary Studies, Capital Normal University（首都师范大学交叉科学研究院）；Beijing Advanced Innovation Center for Imaging Theory and Technology, Capital Normal University（首都师范大学成像技术高精尖创新中心）；DUT-RU ISE, Dalian University of Technology（大连理工大学DUT-RU ISE）；State University of New York at Stony Brook（纽约州立大学石溪分校）
We present a novel, effective method for global point cloud registration problems by geometric topology. Based on many point cloud pairwise registration methods (e.g ICP), we focus on the problem of accumulated error for the composition of transformations along any loops. The major technical contribution of this paper is a linear method for the elimination of errors, using only solving a Poisson equation. We demonstrate the consistency of our method from Hodge-Helmhotz decomposition theorem and experiments on multiple RGBD datasets of real-world scenes. The experimental results also demonstrat…
Apple Inc.（苹果公司）；Carnegie Mellon University（卡内基梅隆大学）
Registration of 3D point clouds is a fundamental task in several applications of robotics and computer vision. While registration methods such as iterative closest point and variants are very popular, they are only locally optimal. There has been some recent work on globally optimal registration, but they perform poorly in the presence of noise in the measurements. In this work we develop a mixed integer programming-based approach for globally optimal registration that explicitly considers uncertainty in its optimization, and hence produces more accurate estimates. Furthermore, from a practica…
This work addresses the problem of point cloud registration using deep neural networks. We propose an approach to predict the alignment between two point clouds with overlapping data content, but displaced origins. Such point clouds originate, for example, from consecutive measurements of a LiDAR mounted on a moving platform. The main difficulty in deep registration of raw point clouds is the fusion of template and source point cloud. Our proposed architecture applies flow embedding to tackle this problem, which generates features that describe the motion of each template point. These features…
Beihang University（北京航空航天大学）；The University of Sydney（悉尼大学）；The University of Hong Kong（香港大学）
Point cloud registration aims at estimating the geometric transformation between two point cloud scans, in which point-wise correspondence estimation is the key to its success. In addition to previous methods that seek correspondences by hand-crafted or learnt geometric features, recent point cloud registration methods have tried to apply RGB-D data to achieve more accurate correspondence. However, it is not trivial to effectively fuse the geometric and visual information from these two distinctive modalities, especially for the registration problem. In this work, we propose a new Geometry-Awa…
Northwestern Polytechnical University（西北工业大学）；Baidu Research（百度研究院）；National Engineering Laboratory of Deep Learning Technology and Application（深度学习技术及应用国家工程实验室）
3D point cloud registration in remote sensing field has been greatly advanced by deep learning based methods, where the rigid transformation is either directly regressed from the two point clouds (correspondences-free approaches) or computed from the learned correspondences (correspondences-based approaches). Existing correspondences-free methods generally learn the holistic representation of the entire point cloud, which is fragile for partial and noisy point clouds. In this paper, we propose a correspondences-free unsupervised point cloud registration (UPCR) method from the representation se…
DeepGlint（深瞐科技）；Shanghai Jiao Tong University（上海交通大学）；Institute of Computing Technology, Chinese Academy of Sciences（中国科学院计算技术研究所）
3D point cloud registration is a fundamental task in robotics and computer vision. Recently, many learning-based point cloud registration methods based on correspondences have emerged. However, these methods heavily rely on such correspondences and meet great challenges with partial overlap. In this paper, we propose ROPNet, a new deep learning model using Representative Overlapping Points with discriminative features for registration that transforms partial-to-partial registration into partial-to-complete registration. Specifically, we propose a context-guided module which uses an encoder to …
Hong Kong University of Science and Technology（香港科技大学）；Shenzhen Zhuke Innovation Technology（深圳珠科创新技术）
Critical to the registration of point clouds is the establishment of a set of accurate correspondences between points in 3D space. The correspondence problem is generally addressed by the design of discriminative 3D local descriptors on the one hand, and the development of robust matching strategies on the other hand. In this work, we first propose a multi-view local descriptor, which is learned from the images of multiple views, for the description of 3D keypoints. Then, we develop a robust matching approach, aiming at rejecting outlier matches based on the efficient inference via belief prop…
Image X Institute, University of Sydney（悉尼大学 Image X 研究所）；Chongqing University of Posts and Telecommunications（重庆邮电大学）；University of Techonology Sydney（悉尼科技大学）；Jiangxi University of Finance and Economics（江西财经大学）；Xpeng（小鹏）
Accurate and efficient point cloud registration is a challenge because the noise and a large number of points impact the correspondence search. This challenge is still a remaining research problem since most of the existing methods rely on correspondence search. To solve this challenge, we propose a new data-driven registration algorithm by investigating deep generative neural networks to point cloud registration. Given two point clouds, the motivation is to generate the aligned point clouds directly, which is very useful in many applications like 3D matching and search. We design an end-to-en…
As the development of 3D sensors, registration of 3D data (e.g. point cloud) coming from different kind of sensor is dispensable and shows great demanding. However, point cloud registration between different sensors is challenging because of the variant of density, missing data, different viewpoint, noise and outliers, and geometric transformation. In this paper, we propose a method to learn a 3D descriptor for finding the correspondent relations between these challenging point clouds. To train the deep learning framework, we use synthetic 3D point cloud as input. Starting from synthetic datas…
Registration of 3D LiDAR point clouds with optical images is critical in the combination of multi-source data. Geometric misalignment originally exists in the pose data between LiDAR point clouds and optical images. To improve the accuracy of the initial pose and the applicability of the integration of 3D points and image data, we develop a simple but efficient registration method. We firstly extract point features from LiDAR point clouds and images: point features is extracted from single-frame LiDAR and point features from images using classical Canny method. Cost map is subsequently built b…
Overlap Bias Matching is Necessary for Point Cloud Registration
School of Software Engineering, Xi’an Jiaotong University（西安交通大学软件学院）；School of Computer and Information Technology, Beijing Jiaotong University（北京交通大学计算机与信息技术学院）；Institute of Automation, Chinese Academy of Sciences（中国科学院自动化研究所）
MEDPNet: Achieving High-Precision Adaptive Registration for Complex Die Castings
School of Mechanical Engineering, Dalian Jiaotong University（大连交通大学机械工程学院）；School of Mechanical Engineering, Dalian University of Technology（大连理工大学机械工程学院）
In this paper, a shape-constrained iterative algorithm is proposed to register a rigid template point-cloud to a given reference point-cloud. The algorithm embeds a shape-based similarity constraint into the principle of gravitation. The shape-constrained gravitation, as induced by the reference, controls the movement of the template such that at each iteration, the template better aligns with the reference in terms of shape. This constraint enables the alignment in difficult conditions indtroduced by change (presence of outliers and/or missing parts), translation, rotation and scaling. We dis…
In feature-learning based point cloud registration, the correct correspondence construction is vital for the subsequent transformation estimation. However, it is still a challenge to extract discriminative features from point cloud, especially when the input is partial and composed by indistinguishable surfaces (planes, smooth surfaces, etc.). As a result, the proportion of inlier correspondences that precisely match points between two unaligned point clouds is beyond satisfaction. Motivated by this, we devise several techniques to promote feature-learning based point cloud registration perfor…
SemICP: Semantic Non-Rigid Point Cloud Registration with Elastic Energy Regularization
Department of Electrical and Computer Engineering, University of British Columbia（电气与计算机工程系，不列颠哥伦比亚大学）；Faculty of Medicine, University of British Columbia（医学院，不列颠哥伦比亚大学）
University of Electronic Science and Technology of China（电子科技大学）；Megvii Technology（旷视科技）
Point cloud registration is a key task in many computational fields. Previous correspondence matching based methods require the inputs to have distinctive geometric structures to fit a 3D rigid transformation according to point-wise sparse feature matches. However, the accuracy of transformation heavily relies on the quality of extracted features, which are prone to errors with respect to partiality and noise. In addition, they can not utilize the geometric knowledge of all the overlapping regions. On the other hand, previous global feature based approaches can utilize the entire point cloud f…
Registration of point clouds related by rigid transformations is one of the fundamental problems in computer vision. However, a solution to the practical scenario of aligning sparsely and differently sampled observations in the presence of noise is still lacking. We approach registration in this scenario with a fusion of the closed-form Universal Mani-fold Embedding (UME) method and a deep neural network. The two are combined into a single unified framework, named DeepUME, trained end-to-end and in an unsupervised manner. To successfully provide a global solution in the presence of large trans…
University of Technology Sydney（悉尼科技大学）；University of Sydney（悉尼大学）；University of Western Australia（西澳大学）
Generating a set of high-quality correspondences or matches is one of the most critical steps in point cloud registration. This paper proposes a learning framework COTReg by jointly considering the pointwise and structural matchings to predict correspondences of 3D point cloud registration. Specifically, we transform the two matchings into a Wasserstein distance-based and a Gromov-Wasserstein distance-based optimizations, respectively. Thus the task of establishing the correspondences can be naturally reshaped to a coupled optimal transport problem. Furthermore, we design a network to predict …
Toward Patient-specific Partial Point Cloud to Surface Completion for Pre- to Intra-operative Registration in Image-guided Liver Interventions
Center for Imaging Science, Rochester Institute of Technology, Rochester, NY 14623, USA（成像科学中心，罗切斯特理工学院，罗切斯特，NY 14623, USA）；Biomedical Engineering, Rochester Institute of Technology, Rochester, NY 14623, USA（生物医学工程，罗切斯特理工学院，罗切斯特，NY 14623, USA）
In this paper, we propose the 3DFeat-Net which learns both 3D feature detector and descriptor for point cloud matching using weak supervision. Unlike many existing works, we do not require manual annotation of matching point clusters. Instead, we leverage on alignment and attention mechanisms to learn feature correspondences from GPS/INS tagged 3D point clouds without explicitly specifying them. We create training and benchmark outdoor Lidar datasets, and experiments show that 3DFeat-Net obtains state-of-the-art performance on these gravity-aligned datasets.
Aligning partial views of a scene into a single whole is essential to understanding one's environment and is a key component of numerous robotics tasks such as SLAM and SfM. Recent approaches have proposed end-to-end systems that can outperform traditional methods by leveraging pose supervision. However, with the rising prevalence of cameras with depth sensors, we can expect a new stream of raw RGB-D data without the annotations needed for supervision. We propose UnsupervisedR&R: an end-to-end unsupervised approach to learning point cloud registration from raw RGB-D video. The key idea is to l…
PointNet has revolutionized how we think about representing point clouds. For classification and segmentation tasks, the approach and its subsequent extensions are state-of-the-art. To date, the successful application of PointNet to point cloud registration has remained elusive. In this paper we argue that PointNet itself can be thought of as a learnable "imaging" function. As a consequence, classical vision algorithms for image alignment can be applied on the problem - namely the Lucas & Kanade (LK) algorithm. Our central innovations stem from: (i) how to modify the LK algorithm to accommodat…
