In recent years, liquid metal dealloying (LMD) has emerged as a promising material processing method to generate micro and nano-scale bicontinuous or porous structures. Most previous studies focused on the experimental characterization of the dealloying process and on the properties of the dealloyed materials, leaving the theoretical study incomplete to fully understand the fundamental mechanisms of LMD. In this paper, we use theoretical models and phase-field simulations to clarify the kinetics and pattern formation during LMD. Our study starts from a theoretical analysis of the 1D dissolution of a binary precursor alloy, which reveals that the 1D dissolution process involves two regimes. In the first regime, due to the low solubility of one of the elements in the melt, it accumulates at the solid-liquid interface, which reduces the dissolution kinetics. In the second regime, the interface kinetics reaches a stationary regime where both elements of the precursor alloy dissolve into the melt. Previous works revealed that in the early dealloying stage, the dealloying front is destabilized by an interfacial spinodal decomposition, which triggers the formation of interconnected ligaments. We extend this line of work by proposing a linear stability analysis able to predict the initial length-scale of the ligaments formed in the initial stage of the dealloying. Combining this analysis with the 1D dissolution model proposed here enables us to better understand the initial conditions (composition of the precursor alloy and the melt) leading to a planar dissolution without interface destabilization. Finally, we report a strong influence of solid-state diffusion on dealloying that was overlooked in previous studies. Although the solid-state diffusivity is four to five orders of magnitude smaller than in the liquid phase, it is found to affect both dissolution kinetics and ligament morphologies.
Dealloying of Platinum-Aluminum Thin Films Part I. Dynamics of Pattern Formation
应用聚焦离子束(FIB)纳米层析成像技术和卢瑟福背散射谱(RBS)对脱合金铂铝薄膜进行了研究,深入分析了脱合金过程中孔隙形成的主要物理机制。由于合金中较不贵重的铝的溶解而导致的动态孔隙形成被处理为反应扩散系统的结果。RBS分析得出,孔隙形成主要是由线性传播的扩散前沿(即液/固界面)引起的,当在室温下使用4 M NaOH水溶液时,其具有42(3)nm/s的均匀速度。实验观察到的前演化捕获正常扩散的Fisher-Kolmogorov-Petrovskiii-Piskounov(FKPP)方程,可以解释为一个分支的随机游走现象。由于合金长时间暴露于碱性溶液中,蚀刻前沿在薄膜的表面附近区域中产生具有增强的孔隙率的逐渐孔隙率。
Mechanical Scaling Laws and Deformation Behavior of Nanoporous Tantalum Microparticles
Facultad de Ciencias Exactas y Naturales, Universidad Nacional de Cuyo(自然与精确科学学院,门多萨国立大学);Instituto Sabato, Comisión Nacional de Energía Atómica, Universidad Nacional de General San Martín(萨巴托研究所,阿根廷国家原子能委员会,圣马丁国立大学);IMDEA Materiales Institute(IMDEA材料研究所);Department of Materials Science and Engineering, Northwestern University(材料科学与工程系,西北大学);Comisión Nacional de Energía Atómica, CONICET(阿根廷国家原子能委员会,阿根廷国家科学研究委员会);Universidad Nacional de General San Martín(圣马丁将军国立大学)
Phase-field modeling of microstructural pattern formation during directional solidification of peritectic alloys without morphological instability
在包晶合金定向凝固过程中,两个稳定的固相(母相和包晶相)竞争生长成亚稳液相,其杂质含量大于任何一个固相。当母相或两个固相在形态上不稳定时,即,对于小的温度梯度/生长速率比($G/v_p$),一个固相通常生长出并覆盖另一个相,导致与在稀二元合金的单相凝固过程中形成的胞状-枝晶阵列结构非常类似的胞状-枝晶阵列结构。相反,当$G/v_p$大到足以使两相形态稳定时,微结构的形成受到两个固相的成核和生长之间的微妙相互作用的控制。在这种情况下观察到的结构(在对流效应被抑制的小样品中)包括垂直于生长方向的母相和周相的交替层(带),其通过一个相交替成核和横向扩散到另一个相上而形成,如最近的模型[R. Trivedi,Metall. Mater. A 26,1(1995)],以及部分填充的带(岛),其中周晶相不完全覆盖连续生长的母相。我们开发了一个相场模型,结合成核过程,以探索这些结构的形成的周向凝固。该模型的模拟揭示了从岛屿到乐队的形态过渡,在母相上的成核后,这原来是由一个显着的恒定的加速度,和生长形态的类型,人们可能会期望在纯扩散生长条件下观察到的大样品的周边相的传播的动态。
High pressure melt dynamics in shock-compressed titanium
Lawrence Livermore National Laboratory(劳伦斯利弗莫尔国家实验室);UCLA(加州大学洛杉矶分校);Department of Chemistry, University of Massachusetts Amherst(马萨诸塞大学阿默斯特分校化学系);Linac Coherent Light Source, SLAC National Accelerator Laboratory(SLAC国家加速器实验室直线相干光源)
Microstructure and Failure Characteristics of Nanostructured Molybdenum Copper Composites
液态金属渗透的Cu 30 Mo 70(重量百分比)使用高压扭转经受剧烈的塑性形变。最初的等轴双相组织逐渐转变为由单独的Cu和Mo层组成的层状组织。薄片的厚度在微米和纳米范围之间变化,这取决于施加的应变的量。与微观结构特征的细化一致,强度和硬度显著增加。此外,在中间变形范围内发现可接受的延展性。通过测量不同裂纹扩展方向的断裂韧性,对所生产的复合材料的损伤容限进行评估。结果表明,一个显着的各向异性的发展与变形程度的增加,这是一个效果的并发对齐的纳米结构的层状复合材料的剪切平面。
Quantitative Phase Field Model of Alloy Solidification
我们提出了一个详细的推导和薄界面分析相场模型,可以准确地模拟微观结构的斑图形成的低速定向凝固的稀二元合金。相对于先前的相场模型的这一进步是通过在质量守恒关系中添加唯象的“反捕获”溶质流来实现的[A。Karma,Phys. Rev. Lett 87,115701(2001)]。这种反捕获电流抵消物理,虽然人为的大,溶质捕获效应时产生的介观界面厚度被用来模拟实验长度和时间尺度上的界面演变。此外,当固体和液体中的扩散率不相等时,它在模型中提供了额外的自由度,以抑制与该厚度成比例的其他虚假效应[R. F. Almgren,SIAM J. Appl. Math 59,2086(1999)],其包括表面扩散和对Stefan条件的曲率校正。这种自由度也可以用来使界面的动力学过冷度任意小,甚至对于界面厚度和相场弛豫时间的介观值也是如此,就像对于纯熔体的凝固一样[A.卡玛和W J. Rappel,Phys.Rev.E53,R3017(1996)]。该模型的性能表明,通过精确计算的第一次内的相场方法的Mullins-Sekerka稳定性谱的平面界面和非线性细胞的形状为现实的合金参数和生长条件。