高指向性非常规双锥型晶体管的实验研究
Tests on High-Directivity Unconventional Biconical Type Antennas
摘要:
设计、制作了具有高指向性的双锥天线,并在电波暗室中进行了测试。本文介绍了在1和5 GHz之间的范围内的结果。特别是,已经测试了两种不同的配置,有和没有电介质透镜,两者都涉及用于电介质和天线支撑的快速原型工具(3D打印)。如今,高效和可持续的点对点通信或能量传输协议需要非常高的方向性,以避免在相邻区域释放能量并保持数据传输安全性。如这里所示,具有3D打印聚乳酸(PLA)介质透镜的特殊双锥形天线可以实现良好的方向性,相应的发射波瓣中心约为8.4度,FWHM为6.4度。非常规形状的介质无透镜天线也可以实现良好的方向性,其相应的发射波瓣中心约为10.0度,FWHM为14.2度。这里显示的初步结果探索了巨大的配置空间的一些方面(包括制造技术,介电材料,导电支撑等)。并开通航线进行进一步优化研究。目的是调整各种自由度,以实现可以定义为“无限”的方向性。
英文摘要:
Biconical-type antennas featuring high directivity have been designed, created, and tested in anechoic chamber. Results in the range between 1 and 5 GHz are presented in this article. In particular, two different configurations have been tested, with and without dielectric lenses, both involving rapid prototyping tools (3D printing) for the dielectric and the antenna support. A very high directivity is nowadays demanded by efficient and sustainable point-to-point communications or energy transfer protocols, to avoid releasing energy in neighboring areas and preserve data transfer security. As demonstrated here, special biconical type antennas featuring a 3D printed polylactic acid (PLA) dielectric lens can achieve a good directivity, with a corresponding emission lobe centered around 8.4 degrees, featuring a FWHM of 6.4 degrees. Dielectric lens-free antennas, featuring an unconventional shape, can also achieve a good directivity, with a corresponding emission lobe centered around 10.0 degrees, featuring a FWHM of 14.2 degrees. The preliminary results shown here explore some of the aspects of the vast configuration space (which include fabrication techniques, dielectric materials, conductive supports, etc.) and open the route for further optimization studies. The aim would be to adjust the various degrees of freedom in order to achieve what can be defined as "infinite" directivity.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。