不确定载荷和应力约束下的鲁棒、可靠性和非概率拓扑优化比较
Comparison of robust, reliability-based and non-probabilistic topology optimization under uncertain loads and stress constraints
摘要:
目前,人们普遍认为,最优结构设计应该是稳健的,相对于载荷和材料参数的不确定性。然而,在结构优化问题中,有几种替代方案可以考虑这种不确定性。本文综合比较了考虑应力约束的不确定载荷下的三种不同拓扑优化方法的结果:1)鲁棒方法,它只需要每个单元上应力的均值和标准差; 2)基于可靠性的方法,它对计算的应力施加可靠性约束; 3)非概率公式,它考虑了由不确定载荷引起的应力的最坏情况。每种方法所需的关于不确定载荷的信息以及在每种情况下使用的不确定性传播方法是完全不同的。鲁棒配方只需要平均值和标准偏差的不确定载荷,应力计算通过一阶摄动方法。基于可靠性的公式需要随机载荷的全概率分布,可靠性约束通过一阶性能度量方法计算。非概率公式适用于有界不确定载荷;仅使用下限和上限,最坏情况下的应力通过嵌套优化与反优化计算。这三种方法在处理不确定性方面有很大的不同;然而,基本的拓扑优化框架是相同的:传统的密度方法用于材料参数化,而增广拉格朗日方法用于解决由此产生的问题,以处理大量的应力约束。
英文摘要:
It is nowadays widely acknowledged that optimal structural design should be robust with respect to the uncertainties in loads and material parameters. However, there are several alternatives to consider such uncertainties in structural optimization problems. This paper presents a comprehensive comparison between the results of three different approaches to topology optimization under uncertain loading, considering stress constraints: 1) the robust formulation, which requires only the mean and standard deviation of stresses at each element; 2) the reliability-based formulation, which imposes a reliability constraint on computed stresses; 3) the non-probabilistic formulation, which considers a worst-case scenario for the stresses caused by uncertain loads. The information required by each method, regarding the uncertain loads, and the uncertainty propagation approach used in each case is quite different. The robust formulation requires only mean and standard deviation of uncertain loads; stresses are computed via a first-order perturbation approach. The reliability-based formulation requires full probability distributions of random loads, reliability constraints are computed via a first-order performance measure approach. The non-probabilistic formulation is applicable for bounded uncertain loads; only lower and upper bounds are used, and worst-case stresses are computed via a nested optimization with anti-optimization. The three approaches are quite different in the handling of uncertainties; however, the basic topology optimization framework is the same: the traditional density approach is employed for material parameterization, while the augmented Lagrangian method is employed to solve the resulting problem, in order to handle the large number of stress constraints.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。