The unsteady response of nozzles with steady heat transfer forced by acoustic and/or entropy waves is modelled. The approach is based on the quasi-one-dimensional linearised Euler equations. The equations are cast in terms of three variables, namely the dimensionless mass, stagnation temperature and entropy fluctuations, which are invariants of the system at zero frequency and with no heat transfer. The resulting first-order system of differential equations is then solved using the Magnus expansion method, where the perturbation parameters are the normalised frequency and the volumetric heat transfer. In this work, a measure of the flow non-isentropicity (in this case the steady heat transfer) is used for the first time as an expansion parameter. The solution method was applied to a converging-diverging nozzle with constant heat transfer for both sub-critical and super-critical flow cases, showing good agreement with numerical predictions. It was observed that the acoustic and entropy transfer functions of the nozzle strongly depend on the frequency and heat transfer.
In this article, a suite of physically inconsistent properties of the Navier-Stokes equations, associated with the lack of mass diffusion and the definition of velocity, are presented. We show that these inconsistencies are consequences of the Lagrangian derivation that models viscous stresses rather than diffusion. A new model for compressible and diffusive (viscous and heat conducting) flows of an ideal gas, is derived in a purely Eulerian framework. We propose that these equations supersede the Navier-Stokes equations. A few numerical experiments demonstrate some differences and similaritie…
We present a number of exact solutions to the linearised Grad equations for non-equilibrium rarefied gas flows and heat flows. The solutions include the flow and pressure fields associated to a point force placed in a rarefied gas flow close to a no-slip boundary and the temperature field for a point heat source placed in a heat flow close to a temperature jump boundary. We also derive the solution of the unsteady Grad equations in one dimension with a time-dependent point heat source term and the Grad analogue of the rotlet, a well-known singularity of Stokes flow which corresponds to a point…
In this paper, a 3D conjugated heat transfer model for Nano-Encapsulated Phase Change Materials (NEPCMs) cooled Micro Pin Fin Heat Sink (MPFHS) is presented. The governing equations of flow and heat transfer are solved using a finite volume method based on collocated grid and the results are validated with the available data reported in the literature. The effect of nanoparticles volume fraction (C = 0.1, 0.2, 0.3), inlet velocity (Vin = 0.015, 0.030, 0.045 m/s), and bottom wall temperature (Twall = 299.15, 303.15, 315.15, 350.15 K) are studied on Nusselt and Euler numbers as well as temperatu…
We study spherically symmetric solutions to the Einstein-Euler equations which model an idealized relativistic neutron star surrounded by vacuum. These are barotropic fluids with a free boundary, governed by an equation of state which sets the speed of sound equal to the speed of light. We demonstrate the existence of a 1-parameter family of static solutions, or ''hard stars,'' and describe their stability properties: First, we show that small stars are a local minimum of the mass energy functional under variations which preserve the total number of particles. In particular, we prove that the …
Heat exchanger tube rows can influence the thermoacoustic instability behaviour of combustion systems since they act as both acoustic scatterers and unsteady heat sinks. Therefore, with careful tuning of their thermoacoustic properties, heat exchangers have the potential to act as passive control devices. In this work, we focus on (only) the acoustic scattering behaviour of heat exchanger tubes. We present a comparison of existing acoustic models for tube rows and slits, models for the latter having the advantage of incorporating frequency dependence. We then propose a new model that enables t…
Acoustic and entropy waves interacting in a duct with a steady heat source and mean flow are analysed using an asymptotic expansion (AE) for low frequencies. The analytical AE solutions are obtained by taking advantage of flow invariants and applying a multi-step strategy. The proposed solutions provide first-order corrections to the compact model in the form of integrals of mean flow variables. An eigenvalue system is then built to predict the thermoacoustic modes of a duct containing a distributed heat source or sink. Predictions from the AE solutions agree well with the numerical results of…
Using numerical simulations, we show that the asymptotic states of two-dimensional (2D) Euler turbulence exhibit large-scale flow structures due to nonzero energy transfers among small wavenumber modes. These asymptotic states, which depend on the initial conditions, are out of equilibrium, and they are different from the predictions of Onsager and Kraichnan. We propose ``hydrodynamic entropy'' to quantify order in 2D Euler turbulence; we show that this entropy decreases with time, even though the system is isolated with no dissipation and no contact with a heat bath.
This study considers the linear stability of Poiseuille-Rayleigh-Bénard flows, subjected to a transverse magnetic field to understand the instabilities that arise from the complex interaction between the effects of shear, thermal stratification and magnetic damping. This fundamental study is motivated in part by the desire to enhance heat transfer in the blanket ducts of nuclear fusion reactors. In pure MHD flows, the imposed transverse magnetic field causes the flow to become quasi-2D and exhibit disturbances that are localised to the horizontal walls. However, the vertical temperature strati…
The document describes a numerical algorithm to simulate plasmas and fluids in the 3 dimensional space by the Euler method, in which the spatial meshes are fixed to the space. The plasmas and fluids move through the spacial Euler mesh boundary. The Euler method can represent a large deformation of the plasmas and fluids. On the other hand, when the plasmas or fluids are compressed to a high density, the spatial resolution should be ensured to describe the density change precisely. The present 3D Euler code is developed to simulate a nuclear fusion fuel ignition and burning. Therefore, the 3D E…
A simplified thermodynamic approach of the incompressible 2D Euler equation is considered based on the conservation of energy, circulation and microscopic enstrophy. Statistical equilibrium states are obtained by maximizing the Miller-Robert-Sommeria (MRS) entropy under these sole constraints. The vorticity fluctuations are Gaussian while the mean flow is characterized by a linear $\barω-ψ$ relationship. Furthermore, the maximization of entropy at fixed energy, circulation and microscopic enstrophy is equivalent to the minimization of macroscopic enstrophy at fixed energy and circulation. This…
Using the anelastic approximation of linearised hydrodynamic equations, we investigate the development of axially symmetric small perturbations in thin Keplerian discs. The sixth-order dispersion equation is derived and numerically solved for different values of relevant physical parameters (viscosity, heat conductivity, disc semi-thickness and vertical structure). The analysis reveals the appearance of two overstable modes which split out from the classical Rayleigh inertial modes in a wide range of the parameters in both ionized and neutral gases. These modes have a viscous-convective nature…
The solution of a momentum conservation equation for the gas and liquid stream in the flowing element is obtained on the basis of the modern approach to a problem on contact interaction of bodies and mediums. A flowing element, system are: pipe, tube, orifice, mouthpiece, diffuser, etc. and its combination. The integration of the differential equation has reduced to distribution law of static head along the length of flowing element and has proved the elementary algebraic solution that introduced in the previous paper by these authors. The received solution allows to describe the motion of flu…
The present study numerically explores the mixed convection phenomena in a differentially heated ventilated square cavity with active flow modulation via a rotating plate. Forced convection flow in the cavity is attained by maintaining an external fluid flow through an opening at the bottom of the left cavity wall while leaving it through another opening at the right cavity wall. A counter-clockwise rotating plate at the center of the cavity acts as active flow modulator. Moving mesh approach is used for the rotation of the plate and the numerical solution is achieved using Arbitrary Lagrangia…
We discuss what is an optimal velocity field for more heat transfer and less energy dissipation under the constraints of the continuity equation for the velocity and the advection-diffusion equation for temperature in plane Couette flow. The excess of a wall heat flux (or equivalently total scalar dissipation) over total energy dissipation is taken as an objective functional, and by using a variational method the Euler-Lagrange equations are derived, which are solved numerically to obtain the optimal states in the sense of maximisation of the functional. At high Reynolds numbers, the optimal h…
Spatial regions that do not mix effectively with their surroundings and thus contribute less to the heat transport in fully turbulent three-dimensional Rayleigh-Bénard flows are identified by Lagrangian trajectories that stay together for a longer time. These trajectories probe Lagrangian coherent sets (CS) which we investigate here in direct numerical simulations in convection cells with square cross section of aspect ratio $Γ= 16$, Rayleigh number $Ra = 10^{5}$, and Prandtl numbers $Pr = 0.1, 0.7$ and $7$. The analysis is based on $N=524,288$ Lagrangian tracer particles which are advected in…
