arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2201.04882physics.flu-dynphysics.data-an
收藏

使用不确定性量化工具开发用于水热液化应用的含水木质素混合物热物理模型

Development of an aqueous lignin mixture thermophysical model for hydrothermal liquefaction applications using uncertainty quantification tools

A. Dinis S. Nunes, José Sierra-Pallares, Khanh-Quang Tran, R. Jason Hearst

摘要:

建立了一个热物理模型,可以预测两种木质素混合物,黑液和木质素磺酸盐,高达50%的质量分数,在水热条件下的性质。纳入了与经典化学建模相关的不确定性量化框架,以解释原材料的极端变异性。理想化的流动模拟验证了该模型,其中热的压缩水与冷的含水木质素流在T形件反应器配置中混合。不确定性量化程序确定密度和热容不确定性显著影响停留时间,粘度不确定性主要影响混合。与纯水混合相比,黑液和木质素磺酸盐混合物的微混合时间分别高出5倍和10倍。通过增加流速,减少了由热物理模型引起的所有模拟量的不确定性。这项研究预测化学反应器的行为在不同的热物理条件下,其最终效果的置信区间。

英文摘要:

A thermophysical model is developed that can predict the properties of two lignin mixtures, black liquor and lignosulfonates, up to 50% mass fractions, at hydrothermal conditions. An uncertainty quantification framework linked with classic thermodynamical modelling was included to account for the extreme variability of the raw material. An idealized flow simulation verified the model, where hot compressed water mixes with a cold, aqueous lignin stream in a T-piece reactor configuration. The uncertainty quantification procedure determined that density and heat capacity uncertainty significantly influence residence time, and viscosity uncertainty mainly affects mixing. Micromixing time is five-fold and ten-fold higher for black liquor and lignosulfonates mixtures, respectively, compared to pure water mixing. The uncertainty in all simulated quantities of interest caused by the thermophysical model is reduced by increasing flow rates. This study predicted chemical reactor behaviour under varying thermophysical conditions and their final effect in terms of confidence intervals.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑