MPC与PID输出融合及其在油田智能分层注水中的应用
Output fusion of MPC and PID and its application in intelligent layered water injection of oilfield
摘要:
为提高油田智能分层注水中波码通信的动态响应性能,提出了一种基于MPC-PID的输出最优融合控制方法。首先,根据井身结构和层的流压特性,建立分层注水全井和不同层段压差与流量之间的稳态模型,求解不同层段稳态工作点对应的波码幅值,数值计算证实,单层段喷嘴开度的增大将使全井压力流量曲线下移。其次,结合全井配水设备的动态响应特性和稳态模型,建立了分层智能注水的动态模型,定义了波码的生成过程;最后,设计了MPC-PID最优融合控制算法结构,推导出在固定权值下,使代价函数最小的融合控制律,并结合控制器的内模结构计算最优权值,均衡了最优融合控制中各算法的优化性能。通过对控制仿真结果的分析,验证了融合控制方法的快速响应特性。同时,结合实际工作条件,对不同方法下的快速波码通信进行了仿真对比实验,结果表明,融合控制方法既具有快速跟踪控制能力,又具有较强的鲁棒性,有效提高了波码通信效率,缩短了波码运行时间。
英文摘要:
To improve the dynamic response performance of wave code communication in intelligent layered water injection of oilfield, this paper proposes an output optimal fusion control method based on MPC-PID. Firstly, depending on the well structure and the flow-pressure characteristics of the layer, the steady-state model between the differential pressure and flow of the whole well and different layer sections is established for layered water injection, and the corresponding wave code amplitude at the steady-state operating point of different layer sections is solved, the numerical calculation verifies that the increase of the nozzle opening in a single layer section will drive the pressure and flow curve of the whole well downward. Secondly, combining the dynamic response characteristics and steady-state model of the whole-well water distribution equipment, a dynamic model of layered intelligent water injection is established, and the generation process of the wave code is defined; Finally, the MPC-PID optimal fusion control algorithm structure is designed to derive the fusion control law that minimizes the cost function under fixed weights, , and the optimal weights are calculated by combining the internal model structure of controller, so the optimization performance of each algorithm in the optimal fusion control is balanced. By analyzing the control simulation results, the fast response characteristics of the fusion control method are verified. Meanwhile, the simulation comparison experiments of fast wave code communication under different methods are conducted with the actual working conditions, the results show that the fusion control method has both fast tracking control capability and strong robustness, which effectively enhances the efficiency of wave code communication and shortens the wave code operation time.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。