构筑型液晶弹性体的协同吸能机理
Synergistic Energy Absorption Mechanisms of Architected Liquid Crystal Elastomers
摘要:
在这里,我们报告的速率依赖的能量吸收行为的液晶弹性体(LCE)为基础的建筑材料组成的重复单元格的倾斜LCE梁夹在刚性支撑。LCE材料的粘弹性行为导致能量吸收根据幂律关系随应变速率增加,这可以通过在合成期间改变介晶排列的程度来调制。对于600 s-1的应变速率,晶胞结构显示出高达5 MJ/m3的能量吸收密度,这比由聚二甲基硅氧烷(PDMS)制造的相同结构高两个数量级,并且与由较致密的金属表现出的不可逆塑性形变的耗散相当。对于单元电池的堆叠结构,粘弹性也产生LCE梁的不均匀屈曲,导致能量吸收密度随着堆叠数n增加到n=3。改变梁的几何形状进一步促进了非均匀屈曲行为,允许能量吸收密度随着堆叠数无限制地增加。我们设想我们的研究可以导致轻质极端能量吸收材料的发展。
英文摘要:
Here, we report the rate-dependent energy absorption behavior of a liquid crystal elastomer (LCE)-based architected material consisting of repeating unit cells of bistable tilted LCE beams sandwiched between stiff supports. Viscoelastic behaviors of the LCE material cause the energy absorption to increase with strain rate according to a power-law relationship, which can be modulated by changing the degree of mesogens alignment during synthesis. For a strain rate of 600 s-1, the unit cell structure shows up to a 5 MJ/m3 energy absorption density, which is two orders of magnitude higher than the same structure fabricated from Polydimethylsiloxane (PDMS), and is comparable to the dissipation from irreversible plastic deformation exhibited by denser metals. For a stacked structure of unit cells, viscoelasticity also produces nonuniform buckling of the LCE beams, causing the energy absorption density to increase with the stacking number n up to n=3. Varying the beam geometry further promotes the nonuniform buckling behavior allowing the energy absorption density to increase with stacking number without bounds. We envision that our study can lead to the development of lightweight extreme energy-absorbing materials.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。