利用3D打印技术分析接地面尺寸、地形和位置对单极子天线性能的影响
Analysis of Ground Plane Size, Topography and Location on a Monopole Antenna's Performance Utilizing 3-D Printing
摘要:
微带天线广泛用于通信应用中,通常安装在充当接地层的各种表面上;最好的例子是汽车的车顶。接地层的形状可以极大地改变微带天线的电磁辐射模式及其RF性能。大量的工作已经做了任意形状的地平面的数值模拟。然而,由于其几何复杂性,很少有工作报告的实际测试组件的物理天线与这些模糊的接地平面结构。本文阐述了如何使用所提出的增材制造工艺来物理实现任意形状的接地层,并提供了一种低成本的工艺来验证数值模型。在保持天线长度不变的情况下修改接地层,以评价对天线性能的影响。水循环微波消融针未优化或变更为标准水循环微波消融针设计。不同半径的球形接地平面建模,以及修改的接地平面结构,以评估接地平面对1.3GHz微带天线的性能的影响,并在某些情况下修改天线的性能方面的增益,带宽和辐射模式。诸如带喇叭的平面接地的设计被发现将天线带宽提高了标准平面接地的5倍以上,但显著恶化了天线的辐射方向图。此外,复杂的几何形状,如鳍球接地平面提供了25%的增益增加相对于标准的球形接地。像边缘安装球体这样的设计可以简单地通过改变天线相对于其接地平面的位置来提供定向增益和辐射特性。本论文中提出的技术为RF应用提供了生产3D打印接地层的新方法。
英文摘要:
The monopole antenna is widely used in communication applications and is typically mounted on various surfaces that act as ground planes; a prime example being the roof of a car. The shape of the ground plane can drastically change the patterns of the electromagnetic radiation of a monopole antenna as well as its RF performance. Extensive work has been done on the numerical modeling of arbitrarily shaped ground planes. However, due to their geometric complexity, there is very little work reported on the practical testing component of physical antennas with these obscure ground plane structures. This thesis illustrates how the additive manufacturing process presented can be used to physically realize arbitrarily shaped ground planes and provides a low-cost process to verify the numerical model. Ground Planes were modified while maintaining the same antenna length to evaluate the impact on antenna performance. The antenna was not optimized or changed to a standard antenna design. Varying radius spherical ground planes are modelled, as well as modified ground plane structures to evaluate the impact of the ground plane on a 1.3GHz monopole antenna's performance and in some cases to modify the antenna's performance in terms of gain, bandwidth, and radiation pattern. Designs such as the planar ground with horn was found to enhance monopole bandwidth by more than 5 times that of a standard planar ground but significantly deteriorate the antenna's radiation pattern. Moreover, complex geometry such as the fin sphere ground plane offered a 25% increase in gain relative to the standard sphere ground. Designs like the edge-mounted sphere can offer directive gain and radiation characteristics simply by altering the antennas' location mount location with respect to its ground plane. The techniques presented in this thesis offer new ways of producing 3D printed ground planes for RF applications.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。