arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2110.02729eess.SP
收藏

高精度动态比较器中用于降低功耗的早期关断电路

An early shutdown circuit for power reduction in high-precision dynamic comparators

Nima Shahpari, Mehdi Habibi, Piero Malcovati

摘要:

动态比较器是低功耗模数转换器(ADC)的重要组成部分,也是混合模式电路中最重要的构建模块之一。动态比较器的功耗和精度直接影响ADC的整体功耗和有效位数。本文提出了一种提前停堆的方法,在适当的时候停用第一级反应堆。此外,时域偏移消除技术被并入以减少偏移效应。该方法可有效降低低功耗高精度动态比较器的功耗。在标准的0.18μ mCMOS工艺上进行了仿真,结果表明了该方法的有效性。与传统方法相比,该电路在最坏情况下具有降低21.7%功耗的能力,而对速度和精度的影响很小。该比较器工作在500MHz时功耗仅为47μW。此外,Monte Carlo评估表明,剩余输入参考偏移的标准差为620μV。

英文摘要:

Dynamic comparators are an essential part of low-power analog to digital converters (ADCs) and are referred to as one of the most important building blocks in mixed mode circuits. The power consumption and accuracy of dynamic comparators directly affects the overall power consumption and effective number of bits of the ADC. In this paper, an early shutdown approach is proposed to deactivate the first stage preamplifier at the suitable time. Furthermore, a time domain offset cancellation technique is incorporated to reduce offset effects. With the proposed method power consumption can be reduced in low power high precision dynamic comparators. The proposed method has been simulated in a standard 0.18μm CMOS technology and the results confirm its effectiveness. The proposed circuit has the ability of reducing the power consumption by 21.7% in the worst case, while having little effect on the speed and accuracy in comparison with the conventional methods. The proposed comparator consumes only 47μW while operating at 500MHz. Furthermore, Monte Carlo evaluations showed that the standard deviation of the residual input referred offset was 620μV.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑