Roboticists have been seeking to address this situation in recent years through the use of soft robots. Unfortunately, identifying appropriate models for the complete analysis and investigation of soft robots for design and control purposes can be problematic. This paper seeks to address this challenge by proposing two complementary modeling techniques for a particular type of soft robotic actuator known as a Fiber-Reinforced Elastomeric Enclosure (FREE). We propose that researchers can leverage multiple models to fill gaps in the understanding of the behavior of soft robots. We present and evaluate both a dynamic, lumped-parameter model and a finite element model to extend understanding of the practicability of FREEs in soft robotic applications. The results with the lumped-parameter model demonstrate that it predicts the actual rotational motion of a FREE with at most 4% error when a closed-loop controller is embedded in the system. Additionally, finite element analysis was used to study FREE design parameters as well as the workspace achieved with a module comprised of multiple FREEs. Our finite element results indicate that variations in the material properties of the elastic enclosure of a FREE are more significant than variations in fiber properties. Finally, finite element results show that a 30-degree difference in winding angle dramatically alters the shape of the workspace generated by four FREEs assembled into a module. Concludingly, comments are made about the relative advantages and limitations of lumped-parameter and finite element models of FREEs and FREE modules in providing useful insights into their behavior.
Force Generation by Parallel Combinations of Fiber-Reinforced Fluid-Driven Actuators
University of Michigan(密歇根大学)
与传统的刚体机器人相比,柔性机器人系统的柔性结构能够实现各种新颖的功能。被称为纤维增强弹性体外壳(FREE)的软流体驱动致动器的子类特别适合作为这些类型的系统的致动器。自由弹性体本质上是柔软的,可以在不施加刚性结构的情况下施加空间力。此外,它们可以被配置为产生各种各样的力和力矩组合。在本文中,我们探讨的潜力,结合多个不同配置的自由电子元件并联,以实现完全可控的多维软驱动。为此,我们提出了一种新的方法来表示和计算的广义软致动器所产生的力作为其内部压力的函数。这种方法依赖于状态相关的流体雅可比矩阵的概念,产生力的线性表达式。我们利用这个概念来构造一个软系统在给定状态下可能产生的所有可能的力的集合。这种力zonotope可以用来通知软致动器的并联组合的设计和控制。实验验证了该方法的并行组合的三个精心设计的致动器约束到一个2DOF的测试台。力的预测值与测量值相匹配,均方根误差小于1.5 N力和8 x 10^(-3)Nm力矩,证明了所提出的方法的实用性。
Temperature Driven Multi-modal/Single-actuated Soft Finger
Graduate School of Engineering Science, Osaka University(大阪大学工程科学研究生院);National Institute of Advanced Industrial Science and Technology (AIST)(日本国立先进工业科学技术研究院(AIST))
Muscle Coactivation in the Sky: Geometry and Pareto Optimality of Energy vs. Aerodynamic Promptness and Multirotors as Variable Stiffness Actuators
Robotics and Mechatronics Department, Electrical Engineering, Mathematics, and Computer Science (EEMCS) Faculty(代尔夫特理工大学机器人与机电系);Department of Computer, Control and Management Engineering(罗马萨皮恩扎大学计算机、控制与管理工程系)