网格基材料均匀化的FFT方法的修改和验证
Adaptation and validation of FFT methods for homogenization of lattice based materials
摘要:
提出了一种FFT框架,它保留了良好的数值性能的情况下,域与大区域的空的空间,并分析其应用于晶格基材料。两个频谱求解器特别适合于解决问题的相位与零刚度被认为是(1)Galerkin方法结合MINRES线性求解器和离散微分规则和(2)修改的位移FFT求解器,惩罚的不确定性的应变在空的区域,导致一个完全确定的方程。求解器结合了几种方法来平滑晶格表面,基于修改未完全嵌入晶格或空空间中的体素的实际刚度。通过与不同相对密度和离散化水平的有限元解进行比较,评估了八位点阵的精度。结果表明,自适应Galerkin方法结合Voigt表面平滑是最好的FFT框架,考虑精度,数值效率和h-收敛。关于数值效率,观察到对于相对密度高于7%的单元,FFT与FEM相比变得具有竞争力。最后,为了显示所提出的方法的真正潜力,FFT框架被用于通过使用直接3D断层扫描数据作为输入来模拟打印晶格的行为。所提出的方法包括明确在模拟的实际表面粗糙度和内部孔隙率从制造过程中产生的。模拟允许量化晶格刚度\rev的降低以及解析大孔附近50%的应力局部化。
英文摘要:
An FFT framework which preserves a good numerical performance in the case of domains with large regions of empty space is proposed and analyzed for its application to lattice based materials. Two spectral solvers specially suited to resolve problem containing phases with zero stiffness are considered (1) a Galerkin approach combined with the MINRES linear solver and a discrete differentiation rule and (2) a modification of a displacement FFT solver which penalizes the indetermination of strains in the empty regions, leading to a fully determined equation. The solvers are combined with several approaches to smooth out the lattice surface, based on modifying the actual stiffness of the voxels not fully embedded in the lattice or empty space. The accuracy of the resulting approaches is assessed for an octet-lattice by comparison with FEM solutions for different relative densities and discretization levels. It is shown that the adapted Galerkin approach combined with a Voigt surface smoothening was the best FFT framework considering accuracy, numerical efficiency and h-convergence. With respect to numerical efficiency it was observed that FFT becomes competitive compared to FEM for cells with relative densities above 7%. Finally, to show the real potential of the approaches presented, the FFT frameworks are used to simulate the behavior of a printed lattice by using direct 3D tomographic data as input. The approaches proposed include explicitly in the simulation the actual surface roughness and internal porosity resulting from the fabrication process. The simulations allowed to quantify the reduction of the lattice stiffness \rev{as well as to resolve the stress localization of 50% near large pores.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。