In this paper, a novel principle-driven fiber transmission model based on physical induced neural network (PINN) is proposed. Unlike data-driven models which regard fiber transmission problem as data regression tasks, this model views it as an equation solving problem. Instead of adopting input signals and output signals which are calculated by SSFM algorithm in advance before training, this principle-driven PINN based fiber model adopts frames of time and distance as its inputs and the corresponding real and imaginary parts of NLSE solutions as its outputs. By taking into account of pulses and signals before transmission as initial conditions and fiber physical principles as NLSE in the design of loss functions, this model will progressively learn the transmission rules. Therefore, it can be effectively trained without the data labels, referred as the pre-calculated signals after transmission in data-driven models. Due to this advantage, SSFM algorithm is no longer needed before the training of principle-driven fiber model which can save considerable time consumption. Through numerical demonstration, the results show that this principle-driven PINN based fiber model can handle the prediction tasks of pulse evolution, signal transmission and fiber birefringence for different transmission parameters of fiber telecommunications.
Fiber Transmission Model with Parameterized Inputs based on GPT-PINN Neural Network
Nanjing University of Posts and Telecommunications(南京邮电大学);Nanjing University of Aeronautics and Astronautics(南京航空航天大学);Tsinghua University(清华大学);Beijing National Research Center for Information Science and Technology(北京信息科学与技术国家研究中心)
Principle Driven Parameterized Fiber Model based on GPT-PINN Neural Network
Nanjing University of Posts and Telecommunications(南京邮电大学);Nanjing University of Aeronautics and Astronautics(南京航空航天大学);Tsinghua University(清华大学);Beijing National Research Center for Information Science and Technology(北京信息科学与技术国家研究中心)
On the SNR Statistics in Coupled-Core Multi-Core Fiber Transmissions with Mode-Dependent Loss
Università degli Studi di Parma(帕尔马大学);National Inter-University Consortium of Telecommunications - CNIT(国家大学电信联盟);Università degli Studi dell’Aquila(拉奎拉大学)
56 GBaud PAM-4 100 km Transmission System with Photonic Processing Schemes
近年来,模拟光子计算作为光纤传输系统中数据恢复的替代方法已经被提出并进行了测试。光子水库计算,执行传输信号的非线性变换和表现出内部衰落记忆,已被发现有利于这种处理。在这项工作中,我们表明,内部衰落记忆的有效性显着依赖于要处理的信号的属性。具体来说,我们展示了两个实验光子后处理方案的56 GBaud PAM-4实验传输系统,100公里的未补偿标准单模光纤和直接检测。我们表明,传输系统具有显着的色散,光子水库的衰落记忆的计算性能的贡献是有限的。在水库计算和极端学习机基于光纤的配置之间的数据恢复性能的比较中,我们发现两者都提供了等效的数据恢复。极限学习机方法消除了外部循环连接的必要性,这简化了系统并提高了计算速度。在31 dB OSNR以上,基于光子学的均衡表现出比相应的离线基于DSP的KK接收器更低的BER。
389.3-Tb/s 1017-km C-band Transmission over Field-Installed 12-Coupled-Core Fiber Cable with >12-Tb/s Spatial MIMO Channels
NTT Network Innovation Laboratories, NTT Corporation(NTT网络创新实验室,NTT公司);NTT Access Service Systems Laboratories, NTT Corporation(NTT接入系统实验室,NTT公司);NTT Device Technology Laboratories, NTT Corporation(NTT器件技术实验室,NTT公司);Optical Communications Laboratory, Sumitomo Electric Industries(住友电工光学通信实验室,住友电气工业株式会社);Faculty of Engineering, Chiba Institute of Technology(千叶工业大学工学部)
Orbital-angular-momentum mode-group multiplexed transmission over a graded-index ring-core fiber based on receive diversity and maximal ratio combining
提出了一种基于渐变折射率环芯光纤(GIRCF)的轨道角动量(OAM)模群复用(MGM)方案,该方案为每个MG信道设计了单输入双输出(或接收分集)结构,并利用简单的数字信号处理(DSP)自适应地抵抗随机群内模串扰引起的模划分噪声。在该方案中不需要复杂的多输入多输出(MIMO)均衡。此外,如果在接收机侧采用简单的最大比合并(MRC)技术以有效地利用接收机的分集增益,则可以提高接收信号的信噪比(SNR)。通过实验分别验证了强度调制直接检测(IM-DD)系统在1 km GIRCF上传输3个OAM模式组,总传输速率为100 Gb/s的离散多音(DMT)信号,以及在18 km GIRCF上传输2个OAM模式组,总传输速率为40 Gb/s的DMT信号,从而验证了所提出的OAM-MGM方案的可行性.