arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2108.10206eess.SP
收藏

基于扩展卡尔曼滤波器的管道多泄漏预测模型

A Simple Probabilistic Model With Extended Kalman Filter To Predict Multi-leak In Pipelines

Radhika P, Anu Mol Joy

摘要:

供水管道在各种性质的流体压力作用下容易发生爆漏。高压头导致周向和(或)轴向应力大于材料屈服应力,可能导致管道失效。同样值得关注的是,在流体压力下降到低于其蒸汽压力的区域中的局部沸腾或空化效应,这反过来又会产生气泡,这些气泡通过管道输送,随后在远程位置破裂。首先,我们开发了一个简单的概率模型的基础上的特征线法(MOC)来模拟管道爆裂泄漏,并与纯确定性水力模型进行了比较。为了简单起见,我们没有考虑空化效应。结果表明,简单的概率模型是在其预测的瞬态比较后者只有轻微的不同。为了确定泄漏的位置和数量在分配系统中,基于模拟水力瞬变检测方法进一步评估使用扩展卡尔曼滤波器(EKF)。我们发现,这种非线性过滤方法的流体瞬态模型大大减少了所需的输入参数的数量,它是能够预测泄漏率和爆裂位置,即使在一个高噪声的环境。

英文摘要:

Pipelines for water supply are susceptible to burst-leakage due to fluid pressures of various nature. High pressure heads resulting in circumferential and (or) axial stresses larger than the material yield stress could cause pipe failure. Of equal concern is the local boiling or cavitation effect in regions of fluid pressure dropping below its vapor pressure, which in turn develop air bubbles that get transported through the pipeline, bursting later at remote locations. We initially developed a simple probabilistic model based on Method of Characteristics (MOC) to simulate burst leakage in pipelines, and compared with a pure deterministic hydraulic model. We had not considered cavitation effects for simplicity. The results indicated that the simple probabilistic model was only marginally different in its prediction of the transients on comparison with the latter. In order to determine the position and amount of leakage in the distribution system, the detection method based on simulating hydraulic transients was further evaluated using Extended Kalman Filter (EKF). We found that this non-linear filtering approach on the fluid transient model considerably reduced the number of input parameters required, and it was able to predict leakage rate and burst positions even in a highly noisy environment.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑