用等离子体激励器稳定横流不稳定性:线性化Navier-Stokes模拟
Stabilization of crossflow instability with plasma actuators: Linearized Navier-Stokes simulations
摘要:
本文介绍了欧盟(EU)-俄罗斯Buterfli项目内进行的工作,看看在过渡引起的“目标”固定横流涡的控制,通过使用分布式等离子体激励产生次主导的“杀手”模式。其目的是使用“杀手”模式,以控制“目标”模式,通过非线性稳定机制。数值模拟和结果进行了比较,在TsAGI T124隧道进行的实验研究的扫掠板受到有利的压力梯度流。在TsAGI开发的致动器的数学模型在线性化的Navier Stokes(LNS)求解器中实现,并用于建模,从而预测实验中测量平面处的“杀手”模式振幅。LNS分析结果与实验结果吻合较好,并将其作为非线性PSE分析的输入,预测了这些模态对横流转捩的影响。虽然数值模型表明过渡延迟,但实验结果表明过渡提前而不是延迟。这被确定为是由于致动器引起的不稳定性在实验中出现,导致产生的旅行横流扰动往往掩盖,从而主导等离子体稳定的静态扰动。
英文摘要:
This paper describes work carried out within the European Union (EU)-Russia Buterfli project to look at the control of transition-causing "target" stationary cross flow vortices, by the use of distributed plasma actuation to generate sub-dominant "killer" modes. The objective is to use the "killer" modes to control the "target" modes through a non-linear stabilizing mechanism. The numerical modelling and results are compared to experimental studies performed at the TsAGI T124 tunnel for a swept plate subject to a favorable pressure gradient flow. A mathematical model for the actuator developed at TsAGI was implemented in a linearized Navier Stokes (LNS) solver and used to model and hence predict "killer" mode amplitudes at a measurement plane in the experiment. The LNS analysis shows good agreement with experiment, and the results are used as input for non-linear PSE analysis to predict the effect of these modes on crossflow transition. Whilst the numerical model indicates a delay in transition, experimental results indicated an advance in transition rather than delay. This was determined to be due to actuator induced unsteadiness arising in the experiment, resulting in the generation of travelling crossflow disturbances which tended to obscure and thus dominate the plasma stabilized stationary disturbances.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。