arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2107.12671eess.SPcs.SDeess.AS
收藏

一种用于声能收集的最佳压电梁

An Optimal Piezoelectric Beam for Acoustic Energy Harvesting

Shahid Beheshti University(沙希德·贝赫什提大学);Sabanci University(萨班哲大学)

Amir Panahi, Alireza Hassanzadeh, Ali Moulavi, Ata Golparvar

摘要:

本研究提出一种新颖的压电梁结构,用于声能收集。这些光束的设计旨在最大限度地提高输出能量的噪音水平是响亮的地区,如高速公路交通。梁由两层铜和聚偏氟乙烯组成,将环境噪音的振动能量转换为电能。研究了压电材料的最佳放置位置,得到了压电材料在基片上的最佳放置位置。与以前的研究不同,在以前的研究中,整个梁基板都被材料覆盖,这项研究提出了适度的材料使用,并有助于降低收割机的最终生产成本。此外,在这项研究中,开发了一个电气模型的传感器和读出电路的转换器提出。此外,传感器在不同长度和位置的不同噪声水平下进行了验证。在COMSOL Multiphysics和MATLAB中进行了模拟,并报告了封闭的充气立方米室中100 dB点源的最大声压为140 dB。

英文摘要:

This study presents a novel piezoelectric beam structure for acoustic energy harvesting. The beams have been designed to maximize output energy in areas where the noise level is loud such as highway traffic. The beam consists of two layers of copper and polyvinylidene fluoride that convert the ambient noise's vibration energy to electrical energy. The piezoelectric material's optimum placement has been studied, and its best position is obtained on the substrate for the maximum yield. Unlike previous studies, in which the entire beam substrate used to be covered by a material, this study presents a modest material usage and contributes to lowering the harvester's final production cost. Additionally, in this study, an electrical model was developed for the sensor and a read-out circuitry was proposed for the converter. Moreover, the sensor was validated at different noise levels at various lengths and locations. The simulations were performed in COMSOL Multiphysics and MATLAB and report a maximum sound pressure of 140 dB from 100 dB point sources in an enclosed air-filled cubic meter chamber.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑