基于体积惩罚的浸入边界法特征解分析:在高阶格式中的应用
Eigensolution analysis of immersed boundary method based on volume penalization: applications to high-order schemes
摘要:
本文给出了线性平流方程基于体积惩罚的浸入边界法的特征解和非模态分析。该方法被用来分析通量重建(FR)离散化的行为,包括多项式阶数和惩罚参数对数值误差和稳定性的影响。通过半离散分析,我们发现,IBM的列入增加了额外的耗散,而不会显着改变原来的数值离散的色散。这与物理直觉一致,即在这种类型的方法中,固体壁被建模为具有消失粘度的多孔介质。从稳定性的观点出发,可以基于全离散分析来分析罚参数的选择,从而为惩罚参数的选择提供了实用的指导。数值实验表明,惩罚项需要增加,以阻尼振荡内的固体(即多孔区域),这导致不希望的时间步长的限制。作为一种替代方案,我们建议在固体中包括一个二阶项,用于无滑移壁边界条件。结果表明,通过增加一个二阶项,我们提高了整体精度与放宽时间步长的限制。这表明,可以仔细选择惩罚参数和二阶阻尼的最优值,以获得更精确的格式。最后,这两个参数之间的近似关系,并作为一个指导方针,以选择最佳的惩罚项的Navier-Stokes求解器,模拟绕流圆柱。
英文摘要:
This paper presents eigensolution and non-modal analyses for immersed boundary methods (IBMs) based on volume penalization for the linear advection equation. This approach is used to analyze the behavior of flux reconstruction (FR) discretization, including the influence of polynomial order and penalization parameter on numerical errors and stability. Through a semi-discrete analysis, we find that the inclusion of IBM adds additional dissipation without changing significantly the dispersion of the original numerical discretization. This agrees with the physical intuition that in this type of approach, the solid wall is modelled as a porous medium with vanishing viscosity. From a stability point view, the selection of penalty parameter can be analyzed based on a fully-discrete analysis, which leads to practical guidelines on the selection of penalization parameter. Numerical experiments indicate that the penalization term needs to be increased to damp oscillations inside the solid (i.e. porous region), which leads to undesirable time step restrictions. As an alternative, we propose to include a second-order term in the solid for the no-slip wall boundary condition. Results show that by adding a second-order term we improve the overall accuracy with relaxed time step restriction. This indicates that the optimal value of the penalization parameter and the second-order damping can be carefully chosen to obtain a more accurate scheme. Finally, the approximated relationship between these two parameters is obtained and used as a guideline to select the optimum penalty terms in a Navier-Stokes solver, to simulate flow past a cylinder.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。