有效使用电子束:通过反激补偿降低STEM中的电子剂量
Using Your Beam Efficiently: Reducing Electron-dose in the STEM via Flyback Compensation
摘要:
在扫描透射电子显微镜中,快速扫描和帧平均是两种广泛使用的方法,用于减少电子束损伤和提高图像信噪比,不需要额外的专用硬件。不幸的是,对于具有短像素驻留时间(小于5 $μ$ s)的扫描,行回扫时间代表越来越浪费的开销。虽然电子束在回扫过程中曝光会造成损坏,同时不会产生有用的信息,扫描线圈滞后意味着完全消除它会导致不可接受的失真图像。在这项工作中,我们减少这种返驰到一个绝对的最小值,校准和校正这种滞后在后处理。可以实现剂量效率的实质性改善(高达20%),同时保持位移/应变测量的晶体学和空间保真度。
英文摘要:
In the scanning transmission electron microscope, fast-scanning and frame-averaging are two widely used approaches for reducing electron-beam damage and increasing image signal-noise ratio which require no additional specialised hardware. Unfortunately, for scans with short pixel dwell-times (less than 5 $μ$s), line flyback time represents an increasingly wasteful overhead. Although beam exposure during flyback causes damage while yielding no useful information, scan-coil hysteresis means that eliminating it entirely leads to unacceptably distorted images. In this work, we reduce this flyback to an absolute minimum by calibrating and correcting for this hysteresis in postprocessing. Substantial improvements in dose-efficiency can be realised (up to 20 %), while crystallographic and spatial fidelity is maintained for displacement/strain measurement.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。