arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2106.15404eess.SPcs.SYeess.SY
收藏

基于历史Marconi装置和时间选通的双基地雷达散射截面测试方法

Bi-static Radar Cross Section Test Method by Using Historic Marconi Set-up and Time Gating

Yousef Azizi, Mohammad Soleimani, Seyed Hasan Sedighi, Ladislau Matekovits

摘要:

本文提出了一种低成本、简单可靠的双基地雷达散射截面(RCS)测量方法。它使用一个发射(Tx)天线(位于一个恒定的位置,在一个参考角度θ = 0 o)和一个接收(Rx)天线(安装在一个可移动的臂上,在方位角方向上校准,精度为0.1 o)。时间选通方法用于从时域中的反射中提取信息;应用时间滤波器允许去除天线旁瓣效应和其他环境噪声。在该方法中,Rx天线(在可移动臂上)用于测量从结构(印刷PCB)和从由相同尺寸的接地(GND)平面表示的参考配置反射的1 o至90 o角度范围内的反射场。然后将时间选通方法应用于每对PCB / GND测量,以提取给定频率下结构的双站RCS图案。在这里,在18 GHz和32 GHz的仿真进行的测量结果的比较表明所提出的方法的成功性能。它可以作为一个低成本,可靠和可用的选择,在未来的测量和科学研究。

英文摘要:

In this paper, a low-cost, simple and reliable bi-static Radar Cross Section (RCS) measurement method making use a historic Marconi set-up is presented. It uses a transmitting (Tx) antenna (located at a constant position, at a reference angle of θ = 0o) and a receiver (Rx) antenna (mounted on a moveable arm calibrated in the azimuthal direction with an accuracy of 0.1o). A time gating method is used to extract the information from the reflection in the time domain; applying time filter allows removing the antenna side lobe effects and other ambient noise. In this method, the Rx antenna (on the movable arm) is used to measure the reflected field in the angular range from 1o to 90o of reflection from the structure (printed PCB) and from the reference configuration represented by a ground (GND) plane of the same dimension. The time gating method is then applied to each pair of PCB / GND measurements to extract the bi-static RCS pattern of the structure at a given frequency. Here comparison of measurement results carried out at 18 GHz and 32 GHz with simulation indicates the successful performance of the proposed method. It can be used as a low-cost, reliable and available option in future measurement and scientific research.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑