利用斜向流体动力流提高单层流通式捕获微流控器件的捕获效率与均匀性
Enhancing the capture efficiency and homogeneity of single-layer flow-through trapping microfluidic devices using oblique hydrodynamic streams
AI总结:
本文研究单层微流控捕获器件中流动方向对捕获性能的影响,发现斜向流相比平行流能显著提高捕获均匀性,并通过实验和模拟给出定性解释。
摘要:
为了并行化和监测生物或生化现象,在微流控器件中捕获和固定粒子、液滴或细胞等对象,迄今一直是研究与工程领域的一个热点方向。无论是被动式还是主动式,这些微流控器件通常由具有不同复杂程度的单元捕获阵列组成。对于给定的阵列,重要的是能够高效、快速地固定尽可能多的对象,同时优化整个芯片上捕获的空间均匀性。对于被动式器件,这一目标通常通过两层结构来实现,但这会使制造工艺更加复杂。在本工作中,我们通过单层激光直写技术在光刻胶中设计了小型微流控捕获结构,并证明即使在这种最简单的情况下,粒子主流相对于捕获结构的取向也会对捕获效率和均匀性产生显著影响。为了更好地理解这一现象,我们考虑了两种不同的流动几何构型:相对于捕获阵列的平行流和斜向流,并定量比较了不同尺寸和密度的粒子的固定情况。利用图像分析,我们表明与直向流相比,斜向流使捕获负载在整个芯片上的空间分布更加均匀;通过进行有限元法(FEM)和捕获模拟,我们对这一现象提出了定性解释。
英文摘要:
With the aim to parallelize and monitor biological or biochemical phenomena, trapping and immobilization of objects such as particles, droplets or cells in microfluidic devices has been an intense area of research and engineering so far. Either being passive or active, these microfluidic devices are usually composed of arrays of elementary traps with various levels of sophistication. For a given array, it is important to have an efficient and fast immobilization of the highest number of objects, while optimizing the spatial homogeneity of the trapping over the whole chip. For passive devices, this has been achieved with two-layers structures, making the fabrication process more complex. In this work, we designed small microfluidic traps by single-layer direct laser writing into a photoresist, and we show that even in this simplest case, the orientation of the main flow of particles with respect to the traps have a drastic effect on the trapping efficiency and homogeneity. To better understand this phenomenon, we have considered two different flow geometries: parallel and oblique with respect to the traps array, and compared quantitatively the immobilization of particles with various sizes and densities. Using image analysis, we show that diagonal flows gives a spatial distribution of the trap loading that is more homogeneous over the whole chip as compared to the straight ones, and by performing FEM and trapping simulation, we propose a qualitative explanation of this phenomenon.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。