基于肖特基二极管的IoT唤醒接收器
A Schottky-Diode-Based Wake-Up Receiver for IoT Applications
摘要:
本文提出了一种始终在线的低功耗唤醒接收器(WuRx),当检测到唤醒信号时,该接收器激活系统的其余部分。所提出的接收器具有两个唤醒阶段。第一阶段使用集成CMOS肖特基二极管在低偏置电流下检测信号功率。该方法消耗低静态功耗,并允许在多个频段中重用设计,只需修改匹配网络。在第二阶段中,提出了一种数据锁定可启动振荡器,以将接收到的数据与目标签名相关联。这种设计消除了外部晶体振荡器的面积和功耗,并且仅在第二阶段被激活时才开启。通过与目标特征相关联,第二阶段还降低了误报警(PFA)的概率,否则误报警将唤醒系统的大功率部分。与单相设计相比,两相方法显著降低了平均功耗。该实现以亚ms唤醒延迟为目标,并以200 kbps的数据速率在750 MHz载波频率的未授权频带中操作。该设计实现了$\sim$ 8.45 pJ/bit,$<$ -50 dBm的输入灵敏度,平均功率为1.69 $μ$ W。该系统采用65 nm CMOS工艺实现,面积为1 mm $\times$ 0.75 mm。
英文摘要:
This paper presents an always-on low-power wake-up receiver (WuRx) that activates the remainder of the system when a wake-up signal is detected. The proposed receiver has two phases of waking up. The first phase uses an integrated CMOS Schottky diodes to detect the signal power at a low bias current. The approach dissipates low quiescent power and allows the reuse of the design in multiple frequency bands with only modifying the matching network. In the second phase, a data-locked startable oscillator is proposed to correlate the received data with a target signature. This design eliminates the area and power dissipation of an external crystal oscillator and only turns on when the second phase is activated. By correlating to a target signature, the second phase also reduces the probability of a false alarm (PFA) that would otherwise wake up the high-power bulk of the system. The two-phase approach leads to significant reduction in average power consumption when compared to a single-phase design. This implementation targets sub-ms wake-up latency and operates in the unlicensed band at a 750-MHz carrier frequency with a data rate of 200 kbps. The design achieves $\sim$8.45pJ/bit and $<$-50 dBm of input sensitivity and average power of 1.69$μ$W. The system is implemented in 65-nm CMOS technology and occupies an area of 1mm$\times$0.75mm.
机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。