arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2105.11232eess.ASphysics.app-ph
收藏

氮化铝二维谐振棒

Aluminum Nitride Two-Dimensional-Resonant-Rods

Xuanyi Zhao, Luca Colombo, Cristian Cassella

摘要:

在过去的几十年里,体声波(BAW)滤波器一直是1G到4G无线电的重要组成部分。这些器件依靠氮化铝(AlN)薄膜体声波谐振器(FBAR)获得的高机电耦合系数(kt 2 ~7%)来实现宽带和低损耗的频率响应。由于FBAR的谐振频率由它们的厚度设定,因此多个FBAR的集成以形成滤波器只能通过采用频率调谐制造步骤(诸如质量加载或修整)来实现。然而,由于更薄的FBAR可靠控制这些步骤的能力显著下降,制造基于FBAR的滤波器,满足新兴物联网和5G高频应用的需求,变得越来越具有挑战性。因此,存在对同时表现出高kt 2和光刻频率可调谐性的新的声学谐振部件的需求。在这项工作中,一类新型的AlN谐振器。这些射频设备,标记为二维谐振棒(2DRR),利用,第一次,非常规的声学行为所表现出的森林局部谐振棒,内置在一个成型的AlN层的主体,夹在底部未图案化的金属板和顶部金属光栅之间。2DRR表现出未开发的模式功能,使他们能够实现高kt 2,一个显着的光刻频率可调性和宽松的光刻分辨率,同时依赖于最佳的AlN晶体取向。2DRR的操作进行了讨论,在这项工作中,通过分析和有限元(FE)的调查。还报道了第一制造的2DRR的测量性能,显示出超过7.4%的kt 2。

英文摘要:

In the last decades, Bulk-Acoustic-Wave (BAW) filters have been essential components of 1G-to-4G radios. These devices rely on the high electromechanical coupling coefficient (kt2~7%), attained by Aluminum Nitride (AlN) Film-Bulk-Acoustic-Resonators (FBARs), to achieve a wideband and low-loss frequency response. As the resonance frequency of FBARs is set by their thickness, the integration of multiple FBARs, to form filters, can only be attained through the adoption of frequency tuning fabrication steps, such as mass loading or trimming. However, as the ability to reliably control these steps significantly decays for thinner FBARs, manufacturing FBARs-based filters, addressing the needs of emerging IoT and 5G high-frequency applications, is becoming more and more challenging. Consequently, there is a quest for new acoustic resonant components, simultaneously exhibiting high kt2 and a lithographic frequency tunability. In this work, a novel class of AlN resonators is presented. These radio-frequency devices, labelled as Two-Dimensional-Resonant-Rods (2DRRs), exploit, for the first time, the unconventional acoustic behavior exhibited by a forest of locally resonant rods, built in the body of a profiled AlN layer that is sandwiched between a bottom un-patterned metal plate and a top metallic grating. 2DRRs exhibit unexplored modal features that make them able to achieve high kt2, a significant lithographic frequency tunability and a relaxed lithographic resolution, while relying on an optimal AlN crystalline orientation. The operation of 2DRRs is discussed, in this work, by means of analytical and finite-element (FE) investigations. The measured performance of the first fabricated 2DRR, showing a kt2 in excess of 7.4%, are also reported.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑