arXivDaily arXiv每日学术速递 周一至周五更新
arXiv周末暂无论文更新,休息一下吧,周末愉快~~
arXiv 2105.07290math.NAcs.CEcs.NA
收藏

圆柱薄壳周向裂纹的模态变形模拟

Circumferential Crack Modeling of Thin Cylindrical Shells in Modal Deformation

Ali Alijani, Olga Barrera, Stephane P. A. Bordas

摘要:

本文介绍了一种新的方法,称为转换法,用来模拟薄圆柱壳中的周向裂纹。采用半解析有限元法研究了圆柱体的模态变形。将含裂纹单元划分为三个四节点子单元,在子单元中充实了刚度矩阵。裂纹特征通过转换矩阵和对应于裂纹的旋转弹簧包含在有限元法关系中。通过在裂纹尖端施加连续性条件得到的转换矩阵被用来转换的中间节点的位移的主要节点。此外,另一种技术,称为弹簧组,表示基于一组弹簧的模型作为一个分离的单元的裂纹。在满足裂纹尖端几何边界条件的情况下,将与分离单元相关的刚度矩阵分量合并。研究了周向振型数、裂纹深度和圆柱长度对临界屈曲载荷的影响。实验测试,ABAQUS建模和文献中的结果被用来验证和验证的结果和推导的关系。此外,使用基于转换技术的振动分析来检查裂纹对固有频率的影响。

英文摘要:

An innovative technique, called conversion, is introduced to model circumferential cracks in thin cylindrical shells. The semi-analytical finite element method is applied to investigate the modal deformation of the cylinder. An element including the crack is divided into three sub-elements with four nodes in which the stiffness matrix is enriched. The crack characteristics are included in the finite element method relations through conversion matrices and a rotational spring corresponding to the crack. Conversion matrices obtained by applying continuity conditions at the crack tip are used to transform displacements of the middle nodes to those of the main nodes. Moreover, another technique, called spring set, is represented based on a set of springs to model the crack as a separated element. Components of the stiffness matrix related to the separated element are incorporated while the geometric boundary conditions at the crack tip are satisfied. The effects of the circumferential mode number, the crack depth and the length of the cylinder on the critical buckling load are investigated. Experimental tests, ABAQUS modeling and results from literature are used to verify and validate the results and derived relations. In addition, the crack effect on the natural frequency is examined using the vibration analysis based on the conversion technique.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑