arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2104.12856cs.CE
收藏

基于等几何分析的含任意形状开孔曲线加筋复合材料板的自由振动分析

Free Vibration analysis of Curvilinearly Stiffened Composite plates with an arbitrarily shaped cutout using Isogeometric Analysis

Balakrishnan Devarajan

AI总结:

本文提出一种基于等几何分析和一阶剪切变形理论的曲线加筋复合材料板自由振动分析方法,可独立建模板与加筋并通过NURBS插值实现耦合,同时支持任意形状开孔建模,系统研究了多种参数对振动响应的影响。

摘要:

本文聚焦于曲线加筋复合材料壁板的等几何振动分析。刚度矩阵和质量矩阵采用一阶剪切变形理论(FSDT)推导。本方法将板和加筋分别建模,允许加筋单元节点与板壳单元节点不重合。通过板/加筋界面处的位移协调条件,利用NURBS基函数插值,将加筋的刚度矩阵和质量矩阵转换到板的相应矩阵上。开孔采用单个NURBS补片建模,该补片通过在两条曲线之间创建直纹面生成。所提出的公式首先通过与已有文献的对比进行验证。随后分析了宽厚比、纤维方向、铺层顺序、开孔形状与尺寸以及边界条件对加筋复合材料板响应的影响,并利用数值结果得出了有用的结论。

英文摘要:

This paper focuses on the isogeometric vibration analysis of curvilinearly stiffened composite panels. The stiffness matrices and the mass matrices are derived using the first-order shear deformation theory (FSDT). The present method models the plate and the stiffener separately, which allows the stiffener element nodes to not coincide with the plate shell-element nodes. The stiffness and mass matrices of a stiffener are transformed to those of the plate through the displacement compatibility conditions at the plate/stiffener interface by interpolation using NURBS basis functions. Cutouts are modeled using a single NURBS patch generated by creating a ruled surface between two curves. The proposed formulation is first validated by comparing it with available literature. The effects of width-to-thickness ratio, fiber orientation, ply layups, shape and size of the cutouts and the boundary conditions on the response of stiffened composite plates are then analyzed and the numerical results are used to derive useful conclusions.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑