As an attempt to tackle the low-data-rate issue of the conventional LoRa systems, we propose two novel frequency-bin-index (FBI) LoRa schemes. In scheme I, the indices of starting frequency bins (SFBs) are utilized to carry the information bits. To facilitate the actual implementation, the SFBs of each LoRa signal are divided into several groups prior to the modulation process in the proposed FBI-LoRa system. To further improve the system flexibility, we formulate a generalized modulation scheme and propose scheme II by treating the SFB groups as an additional type of transmission entity. In scheme II, the combination of SFB indices and that of SFB group indices are both exploited to carry the information bits. We derive the theoretical expressions for bit-error-rate (BER) and throughput of the proposed FBI-LoRa system with two modulation schemes over additive white Gaussian noise (AWGN) and Rayleigh fading channels. Theoretical and simulation results show that the proposed FBI-LoRa schemes can significantly increases the transmission throughput compared with the existing LoRa systems at the expense of a slight loss in BER performance. Thanks to the appealing superiorities, the proposed FBI-LoRa system is a promising alternative for high-data-rate Internet of Things (IoT) applications.
Long Range (LoRa) has become one of the most popular Low Power Wide Area (LPWA) technologies, which provides a desirable trade-off among communication range, battery life, and deployment cost. In LoRa networks, several transmission parameters can be allocated to ensure efficient and reliable communication. For example, the configuration of the spreading factor allows tuning the data rate and the transmission distance. However, how to dynamically adjust the setting that minimizes the collision probability while meeting the required communication performance is an open challenge. This paper prop…
In this paper, we present a device-to-device (D2D) transmission scheme for aiding long-range frequency hopping spread spectrum (LR-FHSS) LoRaWAN protocol with application in direct-to-satellite IoT networks. We consider a practical ground-to-satellite fading model, i.e. shadowed-Rice channel, and derive the outage performance of the LR-FHSS network. With the help of network coding, D2D-aided LR-FHSS transmission scheme is proposed to improve the network capacity for which a closed-form outage probability expression is also derived. The obtained analytical expressions for both LR-FHSS and D2D-a…
Backscatter communication holds potential for ubiquitous and low-cost connectivity among low-power IoT devices. To avoid interference between the carrier signal and the backscatter signal, recent works propose a frequency-shifting technique to separate these two signals in the frequency domain. Such proposals, however, have to occupy the precious wireless spectrum that is already overcrowded, and increase the power, cost, and complexity of the backscatter tag. In this paper, we revisit the classic ON-OFF Keying (OOK) modulation and propose Aloba, a backscatter system that takes the ambient LoR…
This paper investigates a new model to improve the scalability of low-power long-range (LoRa) networks by allowing multiple end devices (EDs) to simultaneously communicate with multiple multi-antenna gateways on the same frequency band and using the same spreading factor. The maximum likelihood (ML) decision rule is first derived for non-coherent detection of information bits transmitted by multiple devices. To overcome the high complexity of the ML detection, we propose a sub-optimal two-stage detection algorithm to balance the computational complexity and error performance. In the first stag…
LoRaWAN is a prominent communication standard to enable reliable low-power, long-range communications for the Internet of Things (IoT). The modulation technique used in LoRaWAN, commonly known as LoRa modulation, is based on the principle of chirp spread spectrum (CSS). While extensive research has been conducted on improving various aspects of LoRa transmitter, the design of LoRa receivers that can operate under practical conditions of timing and frequency offsets is missing. To fill this gap, this paper develops and presents detailed designs of timing, frequency and phase synchronization cir…
LoRaWAN has emerged as one of the promising low-power wide-area network technologies to enable long-range sensing and monitoring applications in Internet of Things. The LoRa physical layer used in LoRaWAN suffers from low data rates and thus increases packet duration. In a dense LoRaWAN network scenario with simple media access protocol like ALOHA, the packet collision probability increases with increase in packet duration. This degrades over-all network throughput because of increased re-transmissions of collided packets. Any increase in data rate directly reduces the packet duration. Thus, i…
In this paper, we investigate the uplink transmissions in low-power wide-area networks (LPWAN) where the users are self-powered by the energy harvested from the ambient environment. Demonstrating their potential in supporting diverse Internet-of-Things (IoT) applications, we focus on long range (LoRa) networks where the LoRa users are using the harvested energy to transmit data to a gateway via different spreading codes. Precisely, we study the throughput fairness optimization problem for LoRa users by jointly optimizing the spreading factor (SF) assignment, energy harvesting (EH) time duratio…
This paper presents a Long Range (LoRa) physical-layer data aggregation system (LoRaPDA) that aggregates data (e.g., sum, average, min, max) directly in the physical layer. In particular, after coordinating a few nodes to transmit their data simultaneously, the gateway leverages a new multi-packet reception (MPR) approach to compute aggregate data from the phase-asynchronous superimposed signal. Different from the analog approach which requires additional power synchronization and phase synchronization, our MRP-based digital approach is compatible with commercial LoRa nodes and is more reliabl…
Data transmission accounts for significant energy consumption in wireless sensor networks where streaming data is generatedby the sensors. This impedes their use in many settings, including livestock monitoring over large pastures (which formsour target application). We present Ambrosia, a lightweight protocol that utilizes a window-based timeseries forecastingmechanism for data reduction. Ambrosia employs a configurable error threshold to ensure that the accuracy of end applicationsis unaffected by the data transfer reduction. Experimental evaluations using LoRa and BLE on a real livestock mo…
We employ quantum state and process tomography with time-bin qubits to benchmark a city-wide metropolitan quantum communication system. Over this network, we implement real-time feedback control systems for stabilizing the phase of the time-bin qubits, and obtain a 99.3% quantum process fidelity to the ideal channel, indicating the high quality of the whole quantum communication system. This allows us to implement field trial of high performance quantum key distribution using coherent one way protocol with average quantum bit error rate and visibility of 0.25% and 99.2% during 12 hours over 61…
