Access points (APs) in millimeter-wave (mmWave) and sub-THz-based user-centric (UC) networks will have sleep mode functionality. As a result of this, it becomes challenging to solve the initial access (IA) problem when the sleeping APs are activated to start serving users. In this paper, a novel deep contextual bandit (DCB) learning method is proposed to provide instant IA using information from the neighboring active APs. In the proposed approach, beam selection information from the neighboring active APs is used as an input to neural networks that act as a function approximator for the bandit algorithm. Simulations are carried out with realistic channel models generated using the Wireless Insight ray-tracing tool. The results show that the system can respond to dynamic throughput demands with negligible latency compared to the standard baseline 5G IA scheme. The proposed fast beam selection scheme can enable the network to use energy-saving sleep modes without compromising the quality of service due to inefficient IA
Reconfigurable intelligent surface (RIS) is a promising technology for future millimeter-wave (mmWave) communication systems. However, its potential benefits of adopting RIS for high-precision positioning in mmWave systems are still less understood. In this paper, we study a multiple-RIS-aided mmWave positioning system and derive the Cram$\rm{\acute{e}}$r-Rao error bound. Based on the derived bound, we optimize the phase shift of the RISs by the particle swarm optimization (PSO) algorithm. Numerical results have demonstrated the advantages of using multiple RISs in enhancing the positioning ac…
Establishing and maintaining millimeter-wave (mmWave) links is challenging due to the changing environment and the high sensibility of mmWave signal to user mobility and channel conditions. MmWave link configuration problems often involve a search for optimal system parameter under environmental uncertainties, from a finite set of alternatives that are supported by the system hardware and protocol. For example, beam sweeping aims at identifying the optimal beam(s) for data transmission from a discrete codebook. Selecting parameters such as the beam sweeping period and the beamwidth are crucial…
Base station (BS) placement in mobile networks is critical to the efficient use of resources in any communication system and one of the main factors that determines the quality of communication. Although there is ample literature on the optimum placement of BSs for sub-6 GHz bands, channel propagation characteristics, such as penetration loss, are notably different in millimeter-wave (mmWave) bands than in sub-6 GHz bands. Therefore, designated solutions are needed for mmWave systems to have reliable quality of service (QoS) assessment. This article proposes a multi-armed bandit (MAB) learning…
Reconfigurable intelligent surface (RIS) is an attractive technology to improve the transmission rate of millimetre-wave (mmWave) communication systems. The previous {research} on RIS technology mainly focused on improving the transmission rate and security rate of the mmWave communication systems. Since the emergence of RIS technology creates the conditions for generating an intelligent radio environment, it also has potential advantages on improving the localization accuracy of the mmWave communication systems. Deployed on walls and objects, RISs are capable of significantly improving commun…
RIS-aided millimeter wave wireless systems benefit from robustness to blockage and enhanced coverage. In this paper, we study the ability of RIS to also provide enhanced localization capabilities as a by-product of communication. We consider sparse reconstruction algorithms to obtain high resolution channel estimates that are mapped to position information. In RIS-aided mmWave systems, the complexity of sparse recovery becomes a bottleneck, given the large number of elements of the RIS and the large communication arrays. We propose to exploit a multidimensional orthogonal matching pursuit stra…
In this paper, we propose a novel two-stage based uplink channel estimation strategy with reduced pilot overhead and error propagation for a reconfigurable intelligent surface (RIS)-aided multi-user (MU) millimeter wave (mmWave) system. Specifically, in Stage I, with the carefully designed RIS phase shift matrix and introduced matching matrices, all users jointly estimate the correlation factors between different paths of the common RIS-base station (BS) channel, which achieves significant multi-user diversity gain. Then, the inherent scaling ambiguity and angle ambiguity of the mmWave cascade…
In this letter, secure beamforming in a multiple intelligent reflecting surfaces (IRSs)-aided millimeter-wave (mmWave) system is investigated. In this system, the secrecy rate is maximized by controlling the on-off status of each IRS as well as optimizing the phase shift matrix of the IRSs. This problem is posed as a joint optimization problem of transmit beamforming and IRS control, whose goal is to maximize the secrecy rate under the total transmission power and unit-modulus constraints. The problem is difficult to solve optimally due to the nonconvexity of constraint conditions and coupled …
MmWave multiple-input single-output (MISO) systems using a single-antenna receiver are regarded as promising solution for the near future, before the full-fledged 5G MIMO will be widespread. However, for MISO systems synchronization cannot be performed jointly with user localization unless two-way transmissions are used. In this paper we show that thanks to the use of a reconfigurable intelligent surface (RIS), joint localization and synchronization is possible with only downlink MISO transmissions. The direct maximum likelihood (ML) estimator for the position and clock offset is derived. To o…
Reconfigurable intelligent surface (RIS) is a promising technique for millimeter wave (mmWave) positioning systems. In this paper, we consider multiple mobile users (MUs) positioning problem in the multiple-input multiple-output (MIMO) time-division duplex (TDD) mmWave systems aided by the RIS. We derive the expression for the space-time channel response vector (STCRV) as a novel type of fingerprint. The STCRV consists of the multipath channel characteristics, e.g., time delay and angle of arrival (AOA), which is related to the position of the MU. By using the STCRV as input, we propose a nove…
The concept of reconfigurable intelligent surface (RIS) has been proposed to change the propagation of electromagnetic waves, e.g., reflection, diffraction, and refraction. To accomplish this goal, the phase values of the discrete RIS units need to be optimized. In this paper, we consider RIS-aided millimeter-wave (mmWave) multiple-input multiple-output (MIMO) systems for both accurate positioning and high data-rate transmission. We propose an adaptive phase shifter design based on hierarchical codebooks and feedback from the mobile station (MS). The benefit of the scheme lies in that the RIS …
Low overhead channel estimation based on compressive sensing (CS) has been widely investigated for hybrid wideband millimeter wave (mmWave) multiple-input multiple-output (MIMO) systems. The channel sparsifying dictionaries used in prior work are built from ideal array response vectors evaluated on discrete angles of arrival/departure. In addition, these dictionaries are assumed to be the same for all subcarriers, without considering the impacts of hardware impairments and beam squint. In this manuscript, we derive a general channel and signal model that explicitly incorporates the impacts of …
In this paper, we focus on the sum-rate optimization in a multi-user millimeter-wave (mmWave) system with distributed intelligent reflecting surfaces (D-IRSs), where a base station (BS) communicates with users via multiple IRSs. The BS transmit beamforming, IRS switch vector, and phase shifts of the IRS are jointly optimized to maximize the sum-rate under minimum user rate, unit-modulus, and transmit power constraints. To solve the resulting non-convex optimization problem, we develop an efficient alternating optimization (AO) algorithm. Specifically, the non-convex problem is converted into t…
Reconfigurable intelligent surface (RIS) has been widely discussed as new technology to improve wireless communication performance. Based on the unique design of RIS, its elements can reflect, refract, absorb, or focus the incoming waves toward any desired direction. These functionalities turned out to be a major solution to overcome millimeter-wave (mmWave)'s high propagation conditions including path attenuation and blockage. However, channel estimation in RIS-aided communication is still a major concern due to the passive nature of RIS elements, and estimation overhead that arises with mult…
Position-aided beam selection methods have been shown to be an effective approach to achieve high beamforming gain while limiting the overhead and latency of initial access in millimeter wave (mmWave) communications. Most research in the area, however, has focused on vehicular applications, where the orientation of the user terminal (UT) is mostly fixed at each position of the environment. This paper proposes a location- and orientation-based beam selection method to enable context information (CI)-based beam alignment in applications where the UT can take arbitrary orientation at each locatio…
The emerging reconfigurable intelligent surface (RIS) technology is promising for applications in the millimeter wave (mmWave) communication systems to effectively compensate for propagation loss or tackle the blockage issue. Considering the high mobility of users in realistic scenarios, it is essential to adjust the phase shifts in real time to align the beam towards the mobile users, which requires to frequently estimate the channel state information. Hence, it is imperative to design efficient channel tracking schemes to avoid the complex channel estimation procedure. In this paper, we deve…
Millimeter-wave (mmWave) and terahertz (THz) communication systems typically deploy large antenna arrays to guarantee sufficient receive signal power. The beam training overhead associated with these arrays, however, make it hard for these systems to support highly-mobile applications such as drone communication. To overcome this challenge, this paper proposes a machine learning-based approach that leverages additional sensory data, such as visual and positional data, for fast and accurate mmWave/THz beam prediction. The developed framework is evaluated on a real-world multi-modal mmWave drone…
The high overhead of the beam training process is the main challenge when establishing mmWave communication links, especially for vehicle-to-everything (V2X) scenarios where the channels are highly dynamic. In this paper, we obtain prior information to speed up the beam training process by implementing two deep neural networks (DNNs) that realize radar-to-communication (R2C) channel information translation in a vehicle-to-infrastructure (V2I) system. Specifically, the first DNN is built to extract the information from the radar azimuth power spectrum (APS) to reconstruct the communication APS,…
In this letter, we focus on the hybrid precoding (HP) design for the reconfigurable intelligent surface (RIS) aided multi-user (MU) millimeter wave (mmWave) communication systems. Specifically, we aim to minimize the mean-squared-error (MSE) between the received symbols and the transmitted symbols by jointly optimizing the analog-digital HP at the base-station (BS) and the phase shifts (PSs) at the RIS, where the non-convex element-wise constant-modulus constraints for the analog precoding and the PSs are tackled by resorting to the gradient-projection (GP) method. We analytically prove the co…
Channel acquisition is one of the main challenges for the deployment of reconfigurable intelligent surface (RIS) aided communication systems. This is because an RIS has a large number of reflective elements, which are passive devices with no active transmitting/receiving abilities. In this paper, we study the channel estimation problem for the RIS aided multi-user millimeter-wave (mmWave) multi-input multi-output (MIMO) system. Specifically, we propose a novel channel estimation protocol for the above system to estimate the cascaded channels, which are the products of the channels from the bas…
University of Oulu（奥卢大学）；Chalmers University of Technology（查尔姆斯理工大学）；Université Paris-Saclay（巴黎萨克雷大学）；CNRS（法国国家科学研究中心）；CentraleSupélec（中央理工-高等电力学院）
Inspired by the remarkable learning and prediction performance of deep neural networks (DNNs), we apply one special type of DNN framework, known as model-driven deep unfolding neural network, to reconfigurable intelligent surface (RIS)-aided millimeter wave (mmWave) single-input multiple-output (SIMO) systems. We focus on uplink cascaded channel estimation, where known and fixed base station combining and RIS phase control matrices are considered for collecting observations. To boost the estimation performance and reduce the training overhead, the inherent channel sparsity of mmWave channels i…
Millimeter wave (mmWave) based multiple-input multiple-output (MIMO) capable user-centric (UC) ultra-dense (UD) networks are suggested to facilitate high throughput requirements of future networks. Due to the high blockage susceptibility of mmWave, the connections may drop frequently. Hence efficient and fast beam management in initial access (IA) is essential. Current cellular systems use beam sweeping based IA mechanisms. UC UD concept requires all of its access points (APs) to perform IA. This leads to a shortage of orthogonal radio resources. Nonorthogonal resource allocation causes interf…
In this paper, we propose an environment semantics aided wireless communication framework to reduce the transmission latency and improve the transmission reliability, where semantic information is extracted from environment image data, selectively encoded based on its task-relevance, and then fused to make decisions for channel related tasks. As a case study, we develop an environment semantics aided network architecture for mmWave communication systems, which is composed of a semantic feature extraction network, a feature selection algorithm, a task-oriented encoder, and a decision network. W…
Vision-aided wireless communication is motivated by the recent advances in deep learning and computer vision as well as the increasing dependence on line-of-sight links in millimeter wave (mmWave) and terahertz systems. By leveraging vision, this new research direction enables an interesting set of new capabilities such as vision-aided mmWave beam and blockage prediction, proactive hand-off, and resource allocation among others. These capabilities have the potential of reliably supporting highly-mobile applications such as vehicular/drone communications and wireless virtual/augmented reality i…
University of Electronic Science and Technology of China（电子科技大学）；Yibin Institute of UESTC（电子科技大学宜宾研究院）；Zhejiang University（浙江大学）；Singapore University of Technology and Design（新加坡科技设计大学）
Reconfigurable intelligent surface (RIS) has recently gained popularity as a promising solution for improving the signal transmission quality of wireless communications with less hardware cost and energy consumption. This letter offers a novel deep reinforcement learning (DRL) algorithm based on a location-aware imitation environment for the joint beamforming design in an RIS-aided mmWave multiple-input multiple-output system. Specifically, we design a neural network to imitate the transmission environment based on the geometric relationship between the user's location and the mmWave channel. …
Knowledge Distillation for Lightweight Multimodal Sensing-Aided mmWave Beam Tracking
Centre for Wireless Communications (CWC), University of Oulu（奥卢大学无线通信中心）；School of Electrical, Computer, and Energy Engineering, Arizona State University（亚利桑那州立大学电气、计算机与能源工程学院）；School of Electrical Engineering & Computer Science, University of California, Irvine（加州大学欧文分校电气与计算机工程学院）
In this paper, an reconfigurable intelligent surface (RIS)-aided millimeter wave (mmWave) non-orthogonal multiple access (NOMA) system is considered. In particular, we consider an RIS-aided mmWave-NOMA downlink system with a hybrid beamforming structure. To maximize the achievable sum-rate under a minimum rate constraint for the users and a minimum transmit power constraint, a joint RIS phase shifts, hybrid beamforming, and power allocation problem is formulated. To solve this non-convex optimization problem, we develop an alternating optimization algorithm. Specifically, first, the non-convex…
Location information offered by external positioning systems, e.g., satellite navigation, can be used as prior information in the process of beam alignment and channel parameter estimation for reconfigurable intelligent surface (RIS)-aided millimeter wave (mmWave) multiple-input multiple-output networks. Benefiting from the availability of such prior information, albeit imperfect, the beam alignment and channel parameter estimation processes can be significantly accelerated with less candidate beams explored at all the terminals. We propose a practical channel parameter estimation method via a…
Compressed Sensing (CS) based channel estimation techniques have recently emerged as an effective way to acquire the channel of millimeter-wave (mmWave) systems with a small number of measurements. These techniques, however, are based on prior knowledge of transmit and receive array manifolds, and assume perfect antenna arrays at both the transmitter and the receiver. In the presence of antenna imperfections, the geometry and response of the arrays are modified. This distorts the CS measurement matrix and results in channel estimation errors. This paper studies the effects of both transmit and…
Configuring millimeter wave links following a conventional beam training protocol, as the one proposed in the current cellular standard, introduces a large communication overhead, specially relevant in vehicular systems, where the channels are highly dynamic. In this paper, we propose the use of a passive radar array to sense automotive radar transmissions coming from multiple vehicles on the road, and a radar processing chain that provides information about a reduced set of candidate beams for the links between the road-infrastructure and each one of the vehicles. This prior information can b…
Lightweight Vision-Aided Beam Tracking for Cross-Environment mmWave Communications
Centre for Wireless Communications (CWC), University of Oulu, Finland（奥卢大学无线通信中心）；School of Electrical, Computer, and Energy Engineering, Arizona State University, Tempe, USA（亚利桑那州立大学电气、计算机与能源工程学院）；School of Electrical Engineering & Computer Science, University of California, Irvine, USA（加州大学欧文分校电气与计算机科学学院）
Mutual Coupling Aware Channel Estimation for RIS-Aided Multi-User mmWave Systems
National Mobile Communications Research Laboratory, Southeast University（东南大学移动通信国家重点实验室）；Shandong Yunhai Guochuang Innovative Technology Co., Ltd.（山东云海国创智能科技有限公司）
A reconfigurable intelligent surface (RIS) can shape the radio propagation by passively changing the directions of impinging electromagnetic waves. The optimal control of the RIS requires perfect channel state information (CSI) of all the links connecting the base station (BS) and the mobile station (MS) via the RIS. Thereby the channel (parameter) estimation at the BS/MS and the related message feedback mechanism are needed. In this paper, we adopt a two-stage channel estimation scheme for the RIS-aided millimeter wave (mmWave) MIMO channels using an iterative reweighted method to sequentiall…
In this paper, we present a novel framework of 3D scene based beam selection for mmWave communications that relies only on the environmental data and deep learning techniques. Different from other out-of-band side-information aided communication strategies, the proposed one fully utilizes the environmental information, e.g., the shape, the position, and even the materials of the surrounding buildings/cars/trees that are obtained from 3D scene reconstruction. Specifically, we build the neural networks with the input as point cloud of the 3D scene and the output as the beam indices. Compared wit…
Reconfigurable intelligent surface (RIS) is considered as a promising solution for next-generation wireless communication networks due to a variety of merits, e.g., customizing the communication environment. Therefore, deploying multiple RISs helps overcome severe signal blocking between the base station (BS) and users, which is also a practical and effective solution to achieve better service coverage. However, reaping the full benefits of a multi-RISs aided communication system requires solving a non-convex, infinite-dimensional optimization problem, which motivates the use of learning-based…
Segment-Wise Flow Matching for Vision-Aided mmWave V2I Beam Prediction
School of Electrical Engineering, Korea University（韩国大学电气工程学院）；School of Computing and Information Technology, Great Bay University（大湾区大学计算与信息技术学院）；School of Information Engineering, Guangdong University of Technology（广东工业大学信息工程学院）；College of Information Science and Electronic Engineering, Zhejiang University（浙江大学信息与电子工程学院）；Department of Electrical Engineering, Chalmers University of Technology（查尔姆斯理工大学电气工程系）
Intelligent reflecting surface (IRS) has been considered as a promising technology to alleviate the blockage effect and enhance coverage in millimeter wave (mmWave) communication. To explore the impact of IRS on the performance of mmWave communication, we investigate a multi-IRS assisted mmWave communication network and formulate a sum rate maximization problem by jointly optimizing the active and passive beamforming and the set of IRSs for assistance. The optimization problem is intractable due to the lack of convexity of the objective function and the binary nature of the IRS selection varia…
This paper presents an inertial sensor aided technique for beam alignment and tracking in massive multiple-input multiple-output (MIMO) vehicle-to-vehicle (V2V) communications based on millimeter waves (mmWave). Since directional communications in vehicular scenarios are severely hindered by beam pointing issues, a beam alignment procedure has to be periodically carried out to guarantee the communication reliability. When dealing with massive MIMO links, the beam sweeping approach is known to be time consuming and often unfeasible due to latency constraints. To speed up the process, we propose…
As communication systems that employ millimeter wave (mmWave) frequency bands must use large antenna arrays to overcome the severe propagation loss of mmWave signals, hybrid beamforming has been considered as an integral component of mmWave communications. Recently, intelligent reflecting surface (IRS) has been proposed as an innovative technology that can significantly improve the performance of mmWave communication systems through the use of low-cost passive reflecting elements. In this paper, we study IRS-aided mmWave multiple-input multiple-output (MIMO) systems with hybrid beamforming arc…
Millimeter wave (mmWave) massive multiple-input multiple-output (massive MIMO) is one of the most promising technologies for the fifth generation and beyond wireless communication system. However, a large number of antennas incur high power consumption and hardware costs, and high-frequency communications place a heavy burden on the analog-to-digital converters (ADCs) at the base station (BS). Furthermore, it is too costly to equipping each antenna with a high-precision ADC in a large antenna array system. It is promising to adopt low-resolution ADCs to address this problem. In this paper, we …
