Multidimensional generalized quadrature index modulation scheme is proposed in this paper for conveying extra digital information with the aid of the space, radio frequency (RF) mirrors, and time indices. Explicitly, this proposed scheme cleverly combines another proposed time-indexed generalized quadrature spatial modulation (TI-GQSM) system with media-based modulation (MBM) transmission principle using RF mirrors, and it is referred to as TI-GQSM-MBM scheme. This scheme is attractive because of both the high data rate and the significant performance improvements that can be achieved. The system performance of the proposed schemes in terms of the bit error rate (BER) is evaluated and compared to the performance of the conventional schemes. Simulation results showed that a significant improvement is achieved by the TI-GQSM-MBM scheme as compared to that of TI-GQSM, time-indexed media-based modulation (TI-MBM) and the conventional generalized quadrature spatial modulation (GQSM) schemes for the same rate. It is also demonstrated that the proposed schemes are robust to channel estimation errors (CEEs) as compared to multidimensional generalized spatial modulation (GSM) schemes. Therefore, the proposed schemes can be effectively used as an alternative solution for various 5G and beyond wireless networks.
In index modulation schemes, information bits are conveyed through indexing of transmission entities such as antennas, subcarriers, times slots, precoders, subarrays, and radio frequency (RF) mirrors. Index modulation schemes are attractive for their advantages such as good performance, high rates, and hardware simplicity. This paper focuses on index modulation schemes in which multiple transmission entities, namely, {\em antennas}, {\em time slots}, and {\em RF mirrors}, are indexed {\em simultaneously}. Recognizing that such multidimensional index modulation schemes encourage sparsity in the…
The present work considers the localization problem in wireless sensor networks formed by fixed nodes. Each node seeks to estimate its own position based on noisy measurements of the relative distance to other nodes. In a centralized batch mode, positions can be retrieved (up to a rigid transformation) by applying Principal Component Analysis (PCA) on a so-called similarity matrix built from the relative distances. In this paper, we propose a distributed on-line algorithm allowing each node to estimate its own position based on limited exchange of information in the network. Our framework enco…
The co-channel interference (CCI) is one of the major impairments in wireless communication. CCI typically reduces the reliability of wireless communication links, but the difficult CCI which is no more or less strong to the desired signals destroys wireless links despite having myriad of CCI mitigation methods. It is shown in this paper that M-QAM (Quadrature Amplitude Modulation) or similar modulation schemes which modulate information both in in-phase and quadrature-phase are particularly vulnerable to difficult CCI. Despite well-known shortcomings, it is shown in this paper that M-PAM or s…
The emerging fifth generation (5G) wireless access network, aiming at providing ubiquitous and high data rate connectivity, is envisaged to deploy large number of base stations with higher density and smaller sizes, where inter-cell interference (ICI) becomes a critical problem. Frequency quadrature amplitude modulation (FQAM) has been shown to reduce the ICI at the cell edge therefore achieve a higher transmission rate for cell edge users. This paper investigates the detection of FQAM symbols and noise plus ICI in a multi-cell FQAM communication network. Turbo-coded bit error rate (BER) and f…
In this paper we analyze and investigate the bit error rate (BER) performance of multiple-input multiple-output underwater wireless optical communication (MIMO-UWOC) systems. In addition to exact BER expressions, we also obtain an upper bound on the system BER. To effectively estimate the BER expressions, we use Gauss-Hermite quadrature formula as well as approximation to the sum of log-normal random variables. We confirm the accuracy of our analytical expressions by evaluating the BER through photon-counting approach. Our simulation results show that MIMO technique can mitigate the channel tu…
We propose index codes, based on multidimensional QAM constellations, for the Gaussian broadcast channel, where every receiver demands all the messages from the source. The efficiency with which an index code exploits receiver side information in this broadcast channel is characterised by a code design metric called "side information gain". The known index codes for this broadcast channel enjoy large side information gains, but do not encode all the source messages at the same rate, and do not admit message sizes that are powers of two. The index codes proposed in this letter, which are based …
Reconfigurable intelligent surfaces (RISs) represent a promising candidate for sixth-generation (6G) wireless networks, as the RIS technology provides a new solution to control the propagation channel in order to improve the efficiency of a wireless link through enhancing the received signal power. In this paper, we propose RIS-assisted receive quadrature space-shift keying (RIS-RQSSK), which enhances the spectral efficiency of an RIS-based index modulation (IM) system by using the real and imaginary dimensions independently for the purpose of IM. Therefore, the error rate performance of the s…
In this paper, we evaluate the end-to-end bit error rate (BER) of point-to-point underwater wireless optical communication (UWOC) systems with multi-hop transmission. To do so, we analytically derive the BER expression of a single-hop UWOC link as the building block for end-to-end BER evaluation. We also apply photon-counting method to evaluate the system BER in the presence of shot noise. Moreover, we use Gauss-Hermite quadrature formula to obtain the closed-form solutions for the system BER in the case of log-normal underwater fading channels. Our analytical treatment involves all the impair…
Intelligent reconfigurable surface (IRS) is being seen as a promising technology for 6G wireless networks. The IRS can reconfigure the wireless propagation environment, which results in significant performance improvement of wireless communications. In this paper, we analyze the performance of bandwidth-efficient quadrature amplitude modulation (QAM) techniques for IRS-assisted wireless communications over Rayleigh fading channels. New closed-form expressions of the generic average symbol error rate (ASER) for rectangular QAM, square QAM and cross QAM schemes are derived. Moreover, simplified …
In this paper, we have considered the optimization of the $M$-ary quadrature amplitude modulation (MQAM) constellation size to minimize the bit energy consumption under average bit error rate (BER) constraints. In the computation of the energy expenditure, the circuit, transmission, and retransmission energies are taken into account. A combined log-normal shadowing and Rayleigh fading model is employed to model the wireless channel. The link reliabilities and retransmission probabilities are determined through the outage probabilities under log-normal shadowing effects. Both single-hop and mul…
A clear understanding the behavior of the error probability (EP) as a function of signal-to-noise ratio (SNR) and other system parameters is fundamental for assessing the design of digital wireless communication systems.We propose an analytical framework based on the log-concavity property of the EP which we prove for a wide family of multidimensional modulation formats in the presence of Gaussian disturbances and fading. Based on this property, we construct a class of local bounds for the EP that improve known generic bounds in a given region of the SNR and are invertible, as well as easily t…
Chongqing University of Posts and Telecommunications（重庆邮电大学）；Anqing Normal University（安庆师范大学）；Nanyang Technological University（南洋理工大学）
The combination of energy harvesting (EH), cognitive radio (CR), and non-orthogonal multiple access (NOMA) is a promising solution to improve energy efficiency and spectral efficiency of the upcoming beyond fifth generation network (B5G), especially for support the wireless sensor communications in Internet of things (IoT) system. However, how to realize intelligent frequency, time, and energy resource allocation to support better performances is an important problem to be solved. In this paper, we study joint spectrum, energy, and time resource management for the EH-CR-NOMA IoT systems. Our g…
In this paper, we analytically study the performance of multiple-input multiple-output underwater wireless optical communication (MIMO UWOC) systems with on-off keying (OOK) modulation. To mitigate turbulence-induced fading, which is amongst the major degrading effects of underwater channels on the propagating optical signal, we use spatial diversity over UWOC links. Furthermore, the effects of absorption and scattering are considered in our analysis. We analytically obtain the exact and an upper bound bit error rate (BER) expressions for both optimal and equal gain combining. In order to more…
We propose a learning-based method for the joint design of a transmit and receive filter, the constellation geometry and associated bit labeling, as well as a neural network (NN)-based detector. The method maximizes an achievable information rate, while simultaneously satisfying constraints on the adjacent channel leakage ratio (ACLR) and peak-to-average power ratio (PAPR). This allows control of the tradeoff between spectral containment, peak power, and communication rate. Evaluation on an additive white Gaussian noise (AWGN) channel shows significant reduction of ACLR and PAPR compared to a …
With recent developments of wireless communication technologies, malicious users can use them to commit crimes or launch terror attacks, thus imposing new threats on the public security. To quickly respond to defend these attacks, authorized parities (e.g., the National Security Agency of the USA) need to intervene in the malicious communication links over the air. This paper investigates this emerging wireless communication intervention problem at the physical layer. Unlike prior studies using jamming to disrupt or disable the targeted wireless communications, we propose a new physical-layer …
This paper considers a multiuser full-duplex (FD) wireless communication system, where a FD radio base station (BS) serves multiple single-antenna half-duplex (HD) uplink and downlink users simultaneously. Unlike conventional interference mitigation approaches, we propose to use the knowledge of the data symbols and the channel state information (CSI) at the FD radio BS to exploit the multi-user interference constructively rather than to suppress it. We propose a multi-objective optimisation problem (MOOP) via the weighted Tchebycheff method to study the trade-off between the two desirable sys…
Distributed space time coding for wireless relay networks when the source, the destination and the relays have multiple antennas have been studied by Jing and Hassibi. In this set-up, the transmit and the receive signals at different antennas of the same relay are processed and designed independently, even though the antennas are colocated. In this paper, a wireless relay network with single antenna at the source and the destination and two antennas at each of the R relays is considered. A new class of distributed space time block codes called Co-ordinate Interleaved Distributed Space-Time Cod…
As a typical example of bandwidth-efficient techniques, bit-interleaved coded modulation with iterative decoding (BICM-ID) provides desirable spectral efficiencies in various wireless communication scenarios. In this paper, we carry out a comprehensive investigation on tail-biting (TB) spatially coupled protograph (SCP) low-density parity-check (LDPC) codes in BICM-ID systems. Specifically, we first develop a two-step design method to formulate a novel type of constellation mappers, referred to as labeling-bit-partial-match (LBPM) constellation mappers, for SC-P-based BICM-ID systems. The LBPM…
The design of a compact high-speed and wide field of view (FOV) receiver is challenging due to the presence of two well-known trade-offs. The first one is the area-bandwidth trade-off of photodetectors (PDs) and the second one is the gain-FOV trade-off due to the use of optics. The combined effects of these two trade-offs imply that the achievable data rate of an imaging optical receiver is limited by its FOV, i.e., a rate-FOV trade-off. To control the area-bandwidth trade-off, an array of small PDs can be used instead of a single PD. Moreover, in practice, a large-area lens is required to ens…
