We report what we believe to be the first radiation-balanced fiber amplifier - a device that provides optical gain while experiencing no temperature rise. The gain medium is a silica fiber with a 21 um-diameter core highly doped with Yb3+ (2.52 wt.%) and co doped with 2.00 wt.% Al to reduce concentration quenching. The amplifier was core-pumped with 1040 nm light to create anti-Stokes fluorescence (ASF) cooling and gain in the core at 1064 nm. Using a custom slow-light FBG sensor with mK resolution, temperature measurements were performed at multiple locations along the amplifier fiber. A 4.35-m fiber pumped with 2.62 W produced 17 dB of gain while the average fiber temperature remained slightly below room temperature. This advancement is a fundamental step toward the creation of ultra-stable lasers necessary to many applications, especially low-noise sensing and high-precision metrology.
The influence of low temperatures on the performance of a high-power single-frequency fiber laser amplifier is evaluated with a numerical simulation. Cooling the fiber can allow to take advantage of both higher damping of the acoustic waves in the silica glass, and higher laser efficiency. We first report on the measurement of the stimulated Brillouin scattering (SBS) threshold in a silica fiber as a function of the temperature from 300~K down to 77~K. We then present the measurements of small-signal absorption and gain spectra of an erbium doped alumino-phosphosilicate fiber, at room temperat…
A comparative study of the gain achievement is performed in a waveguide optical amplifier whose active layer is constituted by a silica matrix containing silicon nanograins acting as sensitizer of either neodymium ions (Nd 3+) or erbium ions (Er 3+). Due to the large difference between population levels characteristic times (ms) and finite-difference time step (10 --17 s), the conventional auxiliary differential equation and finite-difference time-domain (ADE-FDTD) method is not appropriate to treat such systems. Consequently, a new two loops algorithm based on ADE-FDTD method is presented in …
We report a detailed formalism aimed at the thermal modeling and heat mitigation in high-power double-clad fiber amplifiers. Closed form analytical formulas are developed that take into account the spatial profile of the amplified signal and pump in the double-clad geometry, the presence of the amplified spontaneous emission, and the possibility of radiative cooling due to anti-Stokes fluorescence emission. The formalism is applied to a high-power Yb-doped silica fiber amplifier. The contributions to the heat-load from the pump-signal quantum defect, as well as the pump and signal parasitic ab…
A Core/Cladding Yb-doped fiber amplifier configuration is presented that relies on anti-Stokes fluorescence cooling for effective heat mitigation in high-power operation. In the proposed design, the inner cladding of the double clad fiber is doped with the same ion as in the core; therefore, the excess heat generated from the background absorption is removed by the anti-Stokes fluorescence in both core and inner cladding. We consider both silica and ZBLAN glasses for the host material in the Core/Cladding Yb-doped fiber amplifier. The model incorporates the spatial profiles of the signal and p…
The temperature distribution inside a double-cladding optical fiber laser or amplifier is examined in detail. Traditionally, the quantum defect in the core is taken to be the main source of heating in an active optical fiber. However, contributions from the parasitic absorption of the signal and the pump may also play an important role, especially for low quantum defect or radiation-balanced lasers and amplifiers. The contributions to the heating in both the core and the inner-cladding are considered and analyzed in general terms in this paper. In particular, it is shown that if the maximum to…
A novel method for efficient generation of high power, equalized continuous-wave supercontinuum source in an all conventional silica fiber architecture is demonstrated. Highly nonlinear fiber (HNLF) is pumped in its anomalous dispersion region using a novel, high power, L-band laser. The L-band laser encompasses a 6th order cascaded Raman amplifier which is pumped with a high power Ytterbium doped fiber laser and amplifies a low-power, tunable L-band seed source. The supercontinuum generated 35W of power with ~40% efficiency. The Supercontinuum spectrum was measured to have a high degree of fl…
We demonstrate a high power, all-fiber, tunable laser source that can operate in the L-band region. A low power, tunable input laser is amplified with a recently proposed, high efficiency, 6th order cascaded Raman amplifier. The proposed system is scalable and overcomes the limitations of Erbium and Erbium-Ytterbium co-doped fiber lasers for power scaling. A tunable Erbium-Ytterbium co-doped fiber ring laser generating ~0.5W of power and tunable in the 1560-1590 nm wavelength range is utilized as the seed source. The output from the seed laser is amplified to ~24 W using 6th order cascaded Ram…
The ability to amplify optical signals is of pivotal importance across science and technology. The development of optical amplifiers has revolutionized optical communications, which are today pervasively used in virtually all sensing and communication applications of coherent laser sources. In the telecommunication bands, optical amplifiers typically utilize gain media based on III-V semiconductors or rare-earth-doped fibers. Another way to amplify optical signals is to utilize the Kerr nonlinearity of optical fibers or waveguides via parametric processes. Such parametric amplifiers of travell…
Parallel electric and magnetic fields applied to Weyl semimetals pump axial charge via the axial anomaly until balanced by intervalley relaxation. The resulting nonequilibrium steady state exhibits the chiral magnetic effect as well as the anomalous Hall effect, which coupled with Maxwell's equations leads to unstable electromagnetic waves at low frequency and long wavelength. Here, we show that such chiral magnetic instability manifests itself as anomalous reflectance of the surface of pumped Weyl semimetal. Depending on electric, chiral magnetic, and anomalous Hall conductivities, the reflec…
We demonstrate a simple method to obtain accurate optical waveforms with a GHz-level programmable modulation bandwidth and Watt-level output power for wideband optical control of free atoms and molecules. Arbitrary amplitude and phase modulations are transferred from microwave to light with a low-power fiber electro-optical modulator. The sub-milliWatt optical sideband is co-amplified with the optical carrier in a power-balanced fashion through a tapered semiconductor amplifier (TSA). By automatically keeping TSA near saturation in a quasi-continuous manner, typical noise channels associated w…
A phenomenological model for spectral broadening of incoherent light in silica fibers via self-phase modulation and dispersion is presented, aiming at providing a qualitative and readily accessible description of incoherent light spectral broadening. In this model, the incoherent light is approximated by a cosine power-modulated light with modulation parameters depending on the coherent time and the dispersion in fibers. A simple and practical method for spectral broadening predictions is given and demonstrated by both the straightforward NLSE-based numerical modeling and series of experiments…
Continuous-variable optical quantum information processing (CVOQIP), where quantum information is encoded in a traveling wave of light called a flying qubit, is a candidate for a practical quantum computer with high clock frequencies. Homodyne detectors for quadrature-phase amplitude measurements have been the major factor limiting the clock frequency. Here, we developed a real-time amplitude measurement method using a modular optical parametric amplifier (OPA) and a broadband balanced photodiode that is commercially used for coherent wavelength-division multiplexing telecommunication of the f…
Fiber fuse effect can occur spontaneously and propagate along optical fibers to cause wide-spread damage; it threatens all applications involving optical fibers. This paper presents two results. First, it establishes that the initiation of fiber fuse (IFF) in silica fibers is caused by defect-induced absorption. Critical temperatures and critical optical powers for IFF are simulated for the first time using a 3D solid-state heat transfer model with heat source generated by defect-induced absorption. In this method, formation energies of the defects can be uniquely determined, which offers crit…
In this article, silica based triangular lattice PCF has been investigated towards both narrowband and broadband dispersion compensation for application in the communication wavelength. A dual core structure is obtained by introducing two different air-hole diameters in the cladding of the PCF. Dependence of individual structural parameters towards high negative dispersion (both narrowband and broadband) has been investigated in details with multipole mode based solver. The numerical investigation exhibits narrowband of very large negative dispersion of -37,300 ps/nm/km around the wavelength o…
As shown in the early 1960s, the gain in stimulated Raman scattering (SRS) is drastically suppressed when the rate of creation of phonons (via pump-to-Stokes conversion) is exactly balanced by the rate of phonon annihilation (via pump-to-anti-Stokes conversion). This occurs when the phonon coherence waves synchronized vibrations of a large population of molecules have identical propagation constants for both processes, i.e., they are phase-velocity matched. As recently demonstrated, hydrogen-filled photonic crystal fiber pumped in the vicinity of its zero dispersion wavelength provides an idea…
