We demonstrate a novel approach to achieve wavelength-tunable ultrashort pulses from an all-fiber mode-locked laser with a saturable absorber based on nonlinear Kerr beam clean-up effect. This saturable absorber was formed by a single-mode fiber spliced to a graded-index multimode fiber, and its tunable band-pass filter effect is studied by a numerical model. By adjusting the bending condition of graded-index multimode fiber, the laser could produce dissipative soliton pulses with their central wavelength tunable from1040 nm to 1063 nm. The pulse width of output laser could be compressed externally to 791 fs, and the signal to noise ratio of its radio frequency spectrum was measured to be 75.5 dB. This work provides a new idea for the design of wavelength-tunable mode-locked laser which can be used as an attractive light source in communication system.
We introduce a novel concept for optical frequency measurement and division which employs a Kerr-lens mode-locked laser as a transfer oscillator whose noise properties do not enter the measurement process. We experimentally demonstrate, that this method opens up the route to phase-link signals with arbitrary frequencies in the optical or microwave range while their frequency stability is preserved.
We provide a critical review of the fundamental concepts of Kerr lens mode-locking (KLM), along with a detailed description of the experimental considerations involved in the realization of a mode-locked oscillator. In addition, we review recent developments that overcome inherent limitations and disadvantages in standard KLM lasers. Our review is aimed mainly at readers who wish to realize/maintain such an oscillator or for those who wish to better understand this major experimental tool.
Passive mode-locking critically relies on a saturable loss mechanism to form ultrashort pulses. However, in Kerr-lens mode-locking (KLM), no actual absorption takes place, but rather losses appear due to diffraction, and actual light must escape the cavity. The Kerr-lens effect works to generate through diffraction an effective instantaneous saturable absorber that delicately depends on the interplay between the spatial and temporal profiles of the pulse. Despite the importance of KLM as a technique for generating ultrafast pulses and the fundamental role of the diffraction losses in its opera…
We report on a new design for a femtosecond Ti:sapphire oscillator in which dispersion compensation is realized exclusively using mirrors, including special mirrors with third order dispersion. This makes the oscillator dynamically tunable over a spectral range of 45 nm using an intracavity wedge-pair; and it delivers 40 fs pulses at 80 MHz repetition rate. Due to the all-mirror design, the oscillator represents an attractive base for a tunable frequency comb for high precision spectroscopy applications.
The frequency of the Calcium ^3P_1--^1S_0 intercombination line at 657 nm is phase-coherently measured in terms of the output of a primary cesium frequency standard using an optical frequency comb generator comprising a sub-10 fs Kerr-lens mode-locked Ti:Sapphire laser and an external microstructure fiber for self-phase-modulation. The measured frequency of ν_Ca = 455 986 240 494 276 Hz agrees within its relative uncertainty of 4 10^-13 with the values previously measured with a conceptually different harmonic frequency chain and with the value recommended for the realization of the SI unit of…
In this letter, we investigate a Yb-doped mode-locked fiber oscillator that uses coherent pulse division and recombination to avoid excessive nonlinear phase shifts. The mode-locking mechanism of the laser is based on the accumulation of a differential nonlinear phase between orthogonal polarization modes in the polarization-maintaining fiber segment. The inserted coherent pulse divider, based on YVO4-crystals rotated successively by 45°, enables stable and undistorted mode-locked steady-states. The output pulse energy is increased from 89 pJ in the non-divided operation by ~6.5 dB to more tha…
We theoretically and experimentally demonstrate a novel mode-locked ytterbium-doped fiber laser with a saturable absorber based on nonlinear Kerr beam cleanup effect. The saturable absorber was formed by a 2-m graded-index multimode fiber and a single-mode fiber segment served as a diaphragm. With an all-normal-dispersion-fiber configuration, the laser generated dissipative soliton pulses with pulse duration of 26.38 ps and pulse energy more than 0.25 nJ; output pulses could be compressed externally to 615.7 fs. Moreover, the self-starting mode-locking operation of this laser exhibited a high …
Laser frequency combs are coherent light sources that simultaneously provide pristine frequency spacings for precision metrology and the fundamental basis for ultrafast and attosecond sciences. Recently, nonlinear parametric conversion in high-Q microresonators has been suggested as an alternative platform for optical frequency combs, though almost all in 100 GHz frequencies or more. Here we report a low-phase-noise on-chip Kerr frequency comb with mode spacing compatible with high-speed silicon optoelectronics. The waveguide cross-section of the silicon nitride spiral resonator is designed to…
Microresonator frequency combs harness the nonlinear Kerr effect in an integrated optical cavity to generate a multitude of phase-locked frequency lines. The line spacing can reach values in the order of 100 GHz, making it an attractive multi-wavelength light source for applications in fiber-optic communications. Depending on the dispersion of the microresonator, different physical dynamics have been observed. A recently discovered comb state corresponds to the formation of mode-locked dark pulses in a normal-dispersion microcavity. Such dark-pulse combs are particularly compelling for advance…
We demonstrate an all-fiber spatiotemporal mode-locked laser based on graded-index multimode fiber. Due to the high damage threshold of graded-index multimode fiber devices, the output single-pulse energy reach up to 11.67 nJ. The beam quality at mode-locked state is significantly improved compared with continuous wave state as a result of the self-cleaning effect. By amplifying the pulse in the multimode fiber amplifier, high power pulses with high beam quality can be obtained in the all-fiber system based on graded-index MMFs.
We have measured the frequency of the $6s^2S_{1/2} - 5d^2D_{3/2}$ electric-quadrupole transition of $^{171}$Yb$^+$ with a relative uncertainty of $1\times 10^{-14}$, $ν_{Yb}$ = 688 358 979 309 312 Hz $\pm$ 6 Hz. A femtosecond frequency comb generator was used to phase-coherently link the optical frequency derived from a single trapped ion to a cesium fountain controlled hydrogen maser. This measurement is one of the most accurate measurements of optical frequencies ever reported, and it represents a contribution to the development of optical clocks based on an $^{171}$Yb$^+$ ion standard.
A number of factors that influence spectral position of the femtosecond pulse in a Kerr-lens modelocked Cr:LiSGaF laser have been identified: high-order dispersion, gain saturation, reabsorption from the ground state, and stimulated Raman scattering. Using the one-dimensional numerical model for the simulation of the laser cavity, the relative contributions of different factors have been compared. The Raman effect provides the largest self-frequency shift from the gain peak (up to 60 nm), followed by the gain saturation (25 nm), while the high-order dispersion contribution is insignificant (5 …
The results of the study of ultra-short pulse generation in continuous-wave Kerr-lens mode-locked (KLM) solid-state lasers with semiconductor saturable absorbers are presented. The issues of extremely short pulse generation are addressed in the frames of the theory that accounts for the coherent nature of the absorber-pulse interaction. We developed an analytical model that bases on the coupled generalized Landau-Ginzburg laser equation and Bloch equations for a coherent absorber. We showed, that in the absence of KLM semiconductor absorber produces 2pi - non-sech-pulses of self-induced transp…
Lasers based on Cr$^{2+}$-doped II-VI material, often known as the Ti:Sapphire of the mid-infrared, can directly provide few-cycle pulses with super-octave-spanning spectra, and serve as efficient drivers for generating broadband mid-infrared radiation. It is expected that the wider adoption of this technology benefits from more compact and cost-effective embodiments. Here, we report the first directly diode-pumped, Kerr-lens mode-locked Cr$^{2+}$-doped II-VI oscillator pumped by a single InP diode, providing average powers of over 500 mW and pulse durations of 45 fs - shorter than six optical…
The Kerr-lens mode locking ability and the ultrashort pulse characteristics are analyzed numerically for the Cr-doped ZnTe, ZnSe, ZnS active media. The advantages of these materials for the femtosecond lasing within 2 - 3 $μ$m spectral range are demonstrated.
We experimentally study the competition between Kerr beam self-cleaning and Raman beam cleanup in a multimode air-silica microstructure optical fiber. Kerr beam self-cleaning of the pump is observed for a certain range of input powers only. Raman Stokes beam generation and cleanup lead to both depletion and degradation of beam quality for the pump. The interplay of modal four-wave mixing and Raman scattering in the infrared domain lead to the generation of a multimode supercontinuum ranging from 500 nm up to 1800 nm.
We experimentally study polarization dynamics of Kerr beam self-cleaning in a graded-index multimode optical fiber. We show that spatial beam cleaning is accompanied by nonlinear polarization rotation, and a substantial increase of the degree of linear polarization.
Kerr lens-mode-locked Ti:Sapphire lasers are known to display three coexistent modes of operation, that can be described as: continuous wave (CW), transform limited pulses (P1) and positive chirped pulses (P2). Optical rogue waves, in the form of pulses of high energy appearing much often than expected in a Gaussian distribution, are observed in the chaotic regime of the mode P2, but not of P1. These high energy pulses appear in an unpredictable way, but it is observed that their separation (if measured in number of round trips) can take only some definite values, which received the name of "m…
Microresonator-based Kerr frequency comb (microcomb) generation can potentially revolutionize a variety of applications ranging from telecommunications to optical frequency synthesis. However, phase-locked microcombs have generally had low conversion efficiency limited to a few percent. Here we report experimental results that achieve ~30% conversion efficiency (~200 mW on-chip comb power excluding the pump) in the fiber telecommunication band with broadband mode-locked dark-pulse combs. We present a general analysis on the efficiency which is applicable to any phase-locked microcomb state. Th…
We report the experimental observation of Kerr beam self-cleaning in a graded-index multimode fiber, leading to output beam profiles different from a bell shape, close to the $LP_{01}$ mode. For specific coupling conditions, nonlinear coupling among the guided modes can reshape the output speckle pattern generated by a pulsed beam into the low order $LP_{11}$ mode. This was observed in a few meters long multimode fiber with 750 ps pulses at 1064 nm in the normal dispersion regime. The power threshold for $LP_{11}$ mode self-cleaning was about three times larger than that required for Kerr nonl…
In this paper, we numerically investigate the process of beam self-cleaning in a graded-index multimode optical fiber, by using the coupled-mode model. We introduce various models of random linear coupling between spatial modes, including coupling between all modes, or only between degenerate ones, and investigate the effects of random mode coupling on the beam self-cleaning process. The results of numerical investigations are in complete agreement with our experimental data.
Narrow linewidth lasers and optical frequency combs generated with mode-locked lasers revolutionized optical frequency metrology. The advent of soliton Kerr frequency combs in compact crystalline or integrated ring optical microresonators opens new horizons for applications. These combs, as was naturally assumed, however, require narrow-linewidth single-frequency pump lasers. We demonstrate that a regular multi-frequency Fabry-Perot laser diode self-injection locked to an optical whispering gallery mode (WGM) microresonator can be first efficiently transformed to a single-frequency ultra-narro…
We report experimental results, showing that the Kerr beam self-cleaning of many low-order modes in a graded-index multimode fiber can be controlled thanks to optimized wavefront shaping of the coherent excitation beam. Adaptive profiling of the transverse input phase was utilized for channeling the launched power towards a specific low-order fiber mode, by exploiting nonlinear coupling among all guided modes. Experiments were carried out with 7 ps pulses at 1064 nm injected in a five meters long multimode fiber operating in the normal dispersion regime. Optimized Kerr beam self-cleaning of fi…
We experimentally demonstrate Kerr beam self-cleaning in the anomalous dispersion regime of graded-index multimode optical fibers. By using 90 ps duration, highly chirped (2 nm bandwidth at -3dB) optical pulses at 1562 nm, we demonstrate a 2 decades reduction, with respect to previous experiments in the normal dispersion regime, of threshold peak power for beam self-cleaning into the fundamental mode of the fiber, accompanied by more than 65% nonlinear increase of intensity correlation into the fundamental mode. Highly efficient self-selection of the LP11 mode is also observed. Self-cleaned be…
A bidirectional mode-locked fiber laser producing two correlated frequency combs of the same repetition rate is demonstrated. The intensity dependence of pulse and phase velocities are measured simultaneously. As expected, the phase delay is determined by the linear and nonlinear indices of refraction. The nonlinear Kerr effect contribution to the pulse velocity is dwarfed by a contribution from saturable gain dynamics.
We report on the observation of a novel mode locked optical comb generated at the Raman offset (Raman comb) in an optically pumped crystalline whispering gallery mode resonator. Mode locking is confirmed via measurement of the radio-frequency beat note produced by the optical comb on a fast photodiode. Neither the conventional Kerr comb nor hyper-parametric oscillation is observed when the Raman comb is present.
We report the suppression of intermodal modulation instability peaks as a consequence of Kerr induced self beam-cleaning in a 90m long graded-index multimode optical fiber under various specific launching conditions. The output spectrum and the modal beam profiles for three modes (LP01, LP11, and LP21) have been recorded for several values of pump pulse energy. Experimental findings establish that the nonlinear coupling among the guided modes leads to reshaping the output speckle pattern into a bell shape or higher-order spatially clean beam profile as the pump peak power increases, whereas in…
We report on the generation of multiwavelength gain-guided soliton (GGS) in an all normal dispersion birefringent fiber laser passively mode-locked with a semiconductor saturable absorber mirror (SESAM). Determined by the cavity birefringence, we observe the stable single-, dual- and triple- wavelength mode locked GGSs, which is a natural consequence of the mutual nonlinear interaction among the normal cavity dispersion, cavity fiber nonlinear Kerr effect, laser gain saturation and bandwidth limitation resulting from the intra-cavity birefringent filter.
We demonstrate a Kerr-lens mode locked folded cavity using a planar (non-Brewster) Ti:sapphire crystal as a gain and Kerr medium, thus cancelling the nonlinear astigmatism caused by a Brewster cut Kerr medium. Our method uses a novel cavity folding in which the intra-cavity laser beam propagates in two perpendicular planes such that the astigmatism of one mirror is compensated by the other mirror, enabling the introduction of an astigmatic free, planar-cut gain medium. We demonstrate that this configuration is inherently free of nonlinear astigmatism, which in standard cavity folding needs a s…
Optical frequency comb (OFC) technology has been the cornerstone for scientific breakthroughs such as precision frequency metrology, redefinition of time, extreme light-matter interaction, and attosecond sciences. While the current mode-locked laser-based OFC has had great success in extending the scientific frontier, its use in real-world applications beyond the laboratory setting remains an unsolved challenge. Microresonator-based OFCs, or Kerr frequency comb, have recently emerged as a candidate solution to the challenge because of their preferable size, weight, and power consumption (SWaP)…
We present a complete numerical analysis and simulation of the full spatio-temporal dynamics of Kerr-lens mode-locking (KLM) in a laser on all time-scales. The KLM dynamics, which is the workhorse mechanism for generating ultrashort pulses, relies on the intricate coupling between the spatial nonlinear evolution due to self focusing and the temporal nonlinear compression due to self-phase modulation (SPM) and dispersion. Our numerical tool emulates the dynamical evolution of the optical field in the cavity on all time scales: the fast time scale of the pulse envelope within a single round trip…
In this work, we investigate an approach to scale up the output pulse energy in an all polarization-maintaining 17 MHz Yb-doped fiber oscillator via implementation of 25 um core-diameter large-mode-area fibers. The artificial saturable absorber in form of a Kerr-type self-stabilized fiber-interferometer enables highly stable mode-locked steady-states in the soliton-like operation regime with 170 mW average output power and a total output pulse energy of ~10 nJ distributed between two output ports. An experimental parameter comparison with a reference oscillator made of 5.5 um core-sized standa…
Using the Kantorovitch method in combination with a Gaussian ansatz, we derive the equations of motion for spatial, temporal and spatiotemporal optical propagation in a dispersive Kerr medium with a general transverse and spectral gain profile. By rewriting the variational equations as differential equations for the temporal and spatial Gaussian q parameters, optical ABCD matrices for the Kerr effect, a general transverse gain profile and nonparabolic spectral gain filtering are obtained. Further effects can easily be taken into account by adding the corresponding ABCD matrices. Applications i…
We stabilize a chip-scale Si3N4 phase-locked Kerr frequency comb via locking the pump laser to an independent stable high-Q reference microresonator and locking the comb spacing to an external microwave oscillator. In this comb, the pump laser shift induces negligible impact on the comb spacing change. This scheme is a step towards miniaturization of the stabilized Kerr comb system as the microresonator reference can potentially be integrated on-chip. Fractional instability of the optical harmonics of the stabilized comb is limited by the microwave oscillator used for comb spacing lock below 1…
By identifying the similarities between the coupled-wave equations and the parametrically driven nonlinear Schrödinger equation, we unveil the existence condition of the quadratic soliton mode-locked degenerate optical parametric oscillator in the previously unexplored parameter space of near-zero group velocity mismatch. We study the nature of the quadratic solitons and divide their dynamics into two distinctive branches depending on the system parameters. We find the nonlinear interaction between the resonant pump and signal results in phenomena that resemble the dispersive two-photon absorp…
Self-mode-locking has become an emerging path to the generation of ultrashort pulses with vertical-external-cavity surface-emitting lasers. In our work, a strong Kerr nonlinearity that is so far assumed to give rise to mode-locked operation is evidenced and a strong nonlinearity enhancement by the microcavity is revealed. We present wavelength-dependent measurements of the nonlinear absorption and nonlinear-refractive-index change in a gain chip using the Z-scan technique. We report negative nonlinear refraction up to 1.5E-11 cm2/W in magnitude in the (InGa)As/Ga(AsP) material system close to …
Ultrashort pulses from Kerr-lens mode-locked oscillators have inspired a variety of applications. The design and alignment of these laser resonators have thus far been theoretically supported by the conventional analysis of beam propagation. However, the well-established theoretical framework is sometimes beyond the scope of high-peak-power oscillators. In this paper, we analyze the geometry of ring resonators by extending the ABCD-matrix method to a high-peak-power regime. The guidelines to achieving stable Kerr-lens mode-locking is provided for high-peak-power pulses.
Kerr-effect-induced changes of the polarization state of light are well known in pulsed laser systems. An example is nonlinear polarization rotation, which is critical to the operation of many types of mode-locked lasers. Here, we demonstrate that the Kerr effect in a high-finesse Fabry-Pérot resonator can be utilized to control the polarization of a continuous wave laser. It is shown that a linearly-polarized input field is converted into a left- or right-circularly-polarized field, controlled via the optical power. The observations are explained by Kerr-nonlinearity induced symmetry breaking…
Dissipative Kerr solitons have recently been generated in optical microresonators, enabling ultrashort optical pulses at microwave repetition rates, that constitute coherent and numerically predictable Kerr frequency combs. However, the seeding and excitation of the temporal solitons is associated with changes in the intracavity power, that can lead to large thermal resonance shifts during the excitation process and render the soliton states in most commonly used resonator platforms short lived. Here we describe a "power kicking" method to overcome this instability by modulating the power of t…
Kerr soliton frequency comb generation in monolithic microresonators recently attracted great interests as it enables chip-scale few-cycle pulse generation at microwave rates with smooth octave-spanning spectra for self-referencing. Such versatile platform finds significant applications in dual-comb spectroscopy, low-noise optical frequency synthesis, coherent communication systems, etc. However, it still remains challenging to straightforwardly and deterministically generate and sustain the single-soliton state in microresonators. In this paper, we propose and theoretically demonstrate the ex…
We report the spatial beam self-cleaning in bi-tapered conventional multimode fibers (MMFs) with different tapered lengths. Through the introduction of the bi-tapered structure in MMFs, the input beam with poor beam quality from a high-power fiber laser can be converted to a centered, bell-shaped beam in a short length, due to the strengthened nonlinear modes coupling. It is found that the bi-tapered MMF with longer tapered length at the same waist diameter shows better beam self-cleaning effect and larger spectral broadening. The obtained results offer a new method to improve the beam quality…
Optical soliton molecules are bound states of solitons that arise from the balance between attractive and repulsive effects. Having been observed in systems ranging from optical fibers to mode-locked lasers, they provide insights into the fundamental interactions between solitons and the underlying dynamics of the nonlinear systems. Here, we enter the multistability regime of a Kerr microresonator to generate superpositions of distinct soliton states that are pumped at the same optical resonance, and report the discovery of heteronuclear dissipative Kerr soliton molecules. Ultrafast electroopt…
Spectral-control-assisted Kerr-lens mode-locking in a Tm:Y2O3 ceramic laser
State Key Laboratory of Ultra-intense Laser Science and Technology, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences（中国科学院上海光学精密机械研究所超强超短激光科学国家重点实验室）；Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences（中国科学院大学材料科学与光电技术研究中心）；Jiangsu Key Laboratory of Advanced Laser Materials and Devices, Jiangsu Normal University（江苏师范大学江苏省先进激光材料与器件重点实验室）；Future Technology School, Shenzhen Technology University（深圳职业技术大学未来技术学院）
The performance of fiber mode-locked lasers is limited due to the high nonlinearity induced by the spatial confinement of the single-mode fiber core. To massively increase the pulse energy of the femtosecond pulses, amplification is obtained outside the oscillator. Recently, spatiotemporal mode-locking has been proposed as a new path to fiber lasers. However, the beam quality was either highly multimode and/or with low pulse energy. Here we present an approach to reach high energy per pulse directly in the mode-locked multimode fiber oscillator with a near single-mode output beam. Our approach…
We experimentally demonstrate spatial beam self-cleaning in an Yb-doped graded-index multimode fiber taper, both in passive and active configurations. The input laser beam at 1064 nm was injected for propagation from the small to the large core side of the taper, with laser diode pumping in a counterdirectional configuration. The Kerr effect permits to obtain high-beam quality amplification with no accompanying frequency conversions. As a result, our nonlinear taper amplifier may provide an important building block for multimode fiber lasers and amplifiers.
We demonstrated that spatial Kerr beam self-cleaning can be obtained in a highly multimode multicomponent optical fiber based on lanthanum aluminum silicate oxide glasses (SiO2-Al2O3-La2O3), which was made by using the modified powder in tube technology (MIPT). We show how such fabrication method can provide interesting potentialities to design doped multimode optical fibers with homogeneous and quasi-parabolic refractive-index core profile for nonlinear optics applications.
Dissipative Kerr soliton offers broadband coherent and low-noise frequency comb and stable temporal pulse train, having shown great potential applications in spectroscopy, communications, and metrology. Breathing soliton is a particular dissipative Kerr soliton that the pulse duration and peak intensity show periodic oscillation. However, the noise and stability of the breathing soliton is still remaining unexplored, which would be the main obstacle for future applications. Here, we have investigated the breathing dissipative Kerr solitons in the silicon nitride (SiN) microrings, while the bre…
