arXiv 2102.124342021-02-24cond-mat.mtrl-sci

Linking electrical and thermal conductivity through cross-property inclusion modelling

P. A. Cilli, M. Chapman

备注：: 6 pages, 1 figure

英文摘要：

We derive a new cross-property differential effective medium scheme for a composite material's thermal conductivity as a function of its electrical conductivity and vice versa. Our scheme assumes that one phase is embedded in the other as inclusions. The relations are independent of inclusion volume fraction, but depend on the aspect ratio of the inclusions. We show that the method successfully models published laboratory measurements on a copper-graphite composite, with the inferred aspect ratio matching the physical shape of the inclusions. This work complements earlier results on elastic-electrical cross-property differential effective medium modelling, and has the potential to be extended for different cross-property relationships.

机构、总结、中文摘要均由AI分析而来，可能存在错误，请以论文正文为准。

阅读原文

阅读 PDF ↗

arXiv 页面 ↗HTML 原文 ↗

本文内容

英文摘要相关论文

机构、总结、中文摘要均由AI分析而来，可能存在错误，请以论文正文为准。

继续探索

相关论文

Planar 2-D Cracks And Inclusions In Elastic Media

Electrical analogues of fracture, such as the fuse network model, are widely studied. However, the "analogy" between the electrical problem and the elastic problem is rarely established explicitly. Further, the fuse network is a discrete approximation to the continuous problem of fracture. It is rarely, if ever, shown that the discrete approximation indeed approaches its continuum limit. We establish both of these correspondences directly.

2016-01-21cond-mat.dis-nncond-mat.mtrl-scicond-mat.soft

Sharp bounds on the volume fractions of two materials in a two-dimensional body from electrical boundary measurements: the translation method

We deal with the problem of estimating the volume of inclusions using a finite number of boundary measurements in electrical impedance tomography. We derive upper and lower bounds on the volume fractions of inclusions, or more generally two phase mixtures, using two boundary measurements in two dimensions. These bounds are optimal in the sense that they are attained by certain configurations with some boundary data. We derive the bounds using the translation method which uses classical variational principles with a null Lagrangian. We then obtain necessary conditions for the bounds to be attai…

2011-05-04cond-mat.mtrl-scimath-phmath.AP

Electrical Conductivity of Thin-Film Composites Containing Silver Nanoparticles Embedded in a Dielectric Teflon AF Matrix

Thin-film nanocomposites, consisting of silver nanoparticles embedded in a dielectric Teflon\textregistered AF matrix, were synthesized using vapor phase co-deposition. The electrical conductivity of these composites was measured in-situ as a function of film thickness at various metal concentrations. At low metal concentrations (<30%), dielectric behavior and very little change with film thickness was observed. At moderate to high silver loadings (30-80%) a large increase in electrical conductivity was observed as the films grew thicker. As the thickness increased further, the conductivity fl…

2011-05-13cond-mat.mtrl-sci

Investigation of effective thermoelectric properties of composite with interfacial resistance using micromechanics-based homogenisation

We obtained the analytical expression for the effective thermoelectric properties and dimensionless figure of merit of a composite with interfacial electrical and thermal resistances using a micromechanics-based homogenisation. For the first time, we derived the Eshelby tensor for a spherical inclusion as a function of the interfacial resistances and obtained the solutions of the effective Seebeck coefficient and the electrical and thermal conductivities of a composite, which were validated against finite-element analysis (FEA). Our analytical predictions well match the effective properties ob…

2018-12-08cond-mat.mtrl-sci

Electrical conductance of a 2D packing of metallic beads under thermal perturbation

Electrical conductivity measurements on a 2D packing of metallic beads have been performed to study internal rearrangements in weakly pertubed granular materials. Small thermal perturbations lead to large non gaussian conductance fluctuations. These fluctuations are found to be intermittent and gathered in bursts. The distributions of the waiting time between to peaks is found to be a power law inside bursts. The exponent is independent of the bead network, the intensity of the perturbation and external stress. these bursts are interpreted as the signature of individual bead creep rather than …

2000-03-31cond-mat.mtrl-scicond-mat.stat-mech

Thermally expanded graphite polyetherimide composite with superior electrical and thermal conductivity

Thermally expanded graphite (EG) polymer composite has high potential in modern thermoelectronic industry due to cost effectiveness, excellent electrical and thermal properties. In this study, we report that expanded graphite polyetherimide(EG/PEID) composite has been fabricated by simple solution mixing technique, reinforcing a low cost EG filler into host polymer matrix, polyetherimide (PEID). This technique enables the inclusion of 3D graphitic filler into polymer matrix retaining the worm structure of expanded graphite, thus developing continuous network throughout the composite. In result…

2022-04-26cond-mat.mes-hallcond-mat.mtrl-sciphysics.app-ph

更多相关论文收起更多论文

Machine learning and high-throughput robust design of P3HT-CNT composite thin films for high electrical conductivity

Combining high-throughput experiments with machine learning allows quick optimization of parameter spaces towards achieving target properties. In this study, we demonstrate that machine learning, combined with multi-labeled datasets, can additionally be used for scientific understanding and hypothesis testing. We introduce an automated flow system with high-throughput drop-casting for thin film preparation, followed by fast characterization of optical and electrical properties, with the capability to complete one cycle of learning of fully labeled ~160 samples in a single day. We combine regio…

2020-11-20cond-mat.mtrl-sciphysics.app-ph

Rubbing and Drawing: Generic Ways to Improve the Thermoelectric Power Factor of Organic Semiconductors?

Highly oriented polymer films can show considerable anisotropy in the thermoelectric properties leading to power factors beyond those predicted by the widely obeyed power law linking the thermopower $S$ and the electrical conductivity $σ$ as $S\proptoσ^{-1/4}$. This has led to encouraging practical results with respect to the electrical conductivity, notwithstanding that the conditions necessary to enhance $σ$ and $S$ simultaneously are less clear. Here, kinetic Monte Carlo simulations are used to study the impact of structural anisotropy on the thermoelectric properties of disordered organic …

2021-03-05cond-mat.mtrl-sci

Electric-field-enhanced transport in polyacrylamide hydrogel nano-composites

Electroosmotic pumping through uncharged hydrogels can be achieved by embedding the polymer network with charged colloidal inclusions. Matos and co-workers (2006) recently used the concept to enhance the diffusion-limited flux of uncharged molecules across polyacrylamide hydrogel membraness for the purpose of improving the performance of biosensors. This paper seeks to link their reported macroscale diagnostics to physicochemical characteristics of the composite microstructure. A mathematical model for the bulk electroosmotically enhanced tracer flux is proposed, which is combined with the ele…

2007-07-17cond-mat.mtrl-scicond-mat.soft

利用Jonker和Ioffe公式预测可实现的最大功率因数：Al掺杂ZnO三角微晶与石墨夹杂案例研究

Predicting the Realizable Maximum Power Factor using the Jonker and Ioffe formulation: Al-doped ZnO Triangular Microcrystals with Graphite Inclusion Case Study

本研究通过Jonker和Ioffe分析预测Al掺杂ZnO三角微晶与石墨复合材料的最大功率因数，确定最优成分并计算热电效率，同时探究高温热导率异常下降的原因。

2024-09-19cond-mat.mtrl-sci

Carbon nanotube/metal corrosion issues for nanotube coatings and inclusions in a matrix

Corrosion is an inevitable phenomenon that is inherent in metals and even though there has been significant research on this subject, no ideal protection has been discovered to fully prevent corrosion. However, methods such as using protective coatings, and modifying the structure or composition of the material have been used to slow down gradual corrosion and fortunately they proved to be quite beneficial. The research focus has shifted to integrating novel materials and structures to improve the corrosion resistance of composites. Carbon nanotubes (CNTs) are an attractive and promising fille…

2018-11-03cond-mat.mtrl-sciphysics.app-ph