arXivDaily arXiv每日学术速递 周一至周五更新
arXiv 2102.11029physics.ins-detphysics.atom-ph
收藏

Ra EDM实验用高压电极的表面处理和放电调节

Surface Processing and Discharge-Conditioning of High Voltage Electrodes for the Ra EDM Experiment

Roy A. Ready, Gordon Arrowsmith-Kron, Kevin G. Bailey, Dominic Battaglia, Michael Bishof, Daniel Coulter, Matthew R. Dietrich, Ruoyu Fang, Brian Hanley, Jake Hu… 展开作者

Roy A. Ready, Gordon Arrowsmith-Kron, Kevin G. Bailey, Dominic Battaglia, Michael Bishof, Daniel Coulter, Matthew R. Dietrich, Ruoyu Fang, Brian Hanley, Jake Huneau, Sean Kennedy, Peyton Lalain, Benjamin Loseth, Kellen McGee, Peter Mueller, Thomas P. O'Connor, Jordan O'Kronley, Adam Powers, Tenzin Rabga, Andrew Sanchez, Eli Schalk, Dale Waldo, Jacob Wescott, Jaideep T. Singh

摘要:

Ra EDM实验使用一对高压电极来搜索$^{225}$ Ra的原子电偶极矩。我们使用具有200 mm $^2$的主要高梯度表面的相同的平面平行电极来产生可逆DC电场。我们的统计灵敏度与电极间隙中的电场强度成线性比例。我们从加速器物理学文献中改编了表面去污和处理技术,以化学抛光和清洁一套新制造的大颗粒铌和2级钛电极。在0.4 mm至2.5 mm的电极间隙尺寸范围内,使用定制高压测试站在高达$+52.5$ kV/mm和$-51.5$ kV/mm的电场强度下对三对铌电极和一对钛电极进行放电调节。对一对大颗粒铌电极进行放电调节,并验证其在$\pm 20$ kV/mm下工作,稳态泄漏电流为$\leq 25$ pA($1σ$)和每小时的极性平均$98 \pm 19$放电。这些电极安装在Ra EDM实验装置中,取代铜电极对,并重新验证为$\pm 20$ kV/mm。铌电极的电场强度比传统铜电极大3.1倍,最终受到我们30 kV双极电源的最大输出的限制。

英文摘要:

The Ra EDM experiment uses a pair of high voltage electrodes to search for the atomic electric dipole moment of $^{225}$Ra. We use identical, plane-parallel electrodes with a primary high gradient surface of 200 mm$^2$ to generate reversible DC electric fields. Our statistical sensitivity is linearly proportional to the electric field strength in the electrode gap. We adapted surface decontamination and processing techniques from accelerator physics literature to chemical polish and clean a suite of newly fabricated large-grain niobium and grade-2 titanium electrodes. Three pairs of niobium electrodes and one pair of titanium electrodes were discharge-conditioned with a custom high voltage test station at electric field strengths as high as $+52.5$ kV/mm and $-51.5$ kV/mm over electrode gap sizes ranging from 0.4 mm to 2.5 mm. One pair of large-grain niobium electrodes was discharge-conditioned and validated to operate at $\pm 20$ kV/mm with steady-state leakage current $\leq 25$ pA ($1σ$) and a polarity-averaged $98 \pm 19$ discharges per hour. These electrodes were installed in the Ra EDM experimental apparatus, replacing a copper electrode pair, and were revalidated to $\pm 20$ kV/mm. The niobium electrodes perform at an electric field strength 3.1 times larger than the legacy copper electrodes and are ultimately limited by the maximum output of our 30 kV bipolar power supply.

机构、总结、中文摘要均由AI分析而来,可能存在错误,请以论文正文为准。

↑